Cyhoeddiadau 2019

Aamir, M. et al., 2019. Performance of SAC305 and SAC305-0.4La lead free electronic solders at high temperature. Soldering and Surface Mount Technology 31 (4), pp.250-260. (10.1108/SSMT-01-2019-0001)
Abbas, H. H. et al. 2019. An automatic approach for classification and categorisation of lip morphological traits. PLoS ONE 14 (10) e0221197. (10.1371/journal.pone.0221197)
Abdalqader, A. , Jin, F. and Al-Tabbaa, A. 2019. Performance of magnesia-modified sodium carbonate-activated slag/fly ash concrete. Cement and Concrete Composites 103 , pp.160-174. (10.1016/j.cemconcomp.2019.05.007)
Abdi, S. et al., 2019. The effect of water content on the electrical properties of transformer oil. Presented at: 21st International Symposium on High Voltage Engineering Frankfurt, Germany 11-15 March 2019. Proceedings of the 21st International Symposium on High Voltage Engineering Volume 2. Vol. 2.Lecture Notes in Electrical Engineering Springer Science Business Media. , pp.518-527. (10.1007/978-3-030-31680-8_52)
Abduljabar, A. A. , Choi, H. and Porch, A. 2019. Novel variable coupling technique for microwave liquid heating and sensing. Presented at: 18th Mediterranean Microwave Symposium (MMS) 2018 Istanbul, Turkey 31 October - 2 November 2018. 18th Mediterranean Microwave Symposium (MMS) 2018. IEEE. , pp.-. (10.1109/MMS.2018.8612033)
Abed, S. N. , Almuktar, S. A. and Scholz, M. 2019. Phytoremediation performance of floating treatment wetlands with pelletized mine water sludge for synthetic greywater treatment. Journal of Environmental Health Science & Engineering 17 (2)(10.1007/s40201-019-00372-z)
Abeynayake, G. et al. 2019. Reliability evaluation of voltage source converters for MVDC applications. Presented at: IEEE ISGT Asia 2019 Chengdu, China 21-24 May 2019. IEEE Innovative Smart Grid Technologies - Asia (ISGT Asia). IEEE(10.1109/ISGT-Asia.2019.8881326)
Abeynayake, G. et al. 2019. A review on MVdc collection systems for high power offshore wind farms. Presented at: 2019 IEEE International Conference on Industrial and Information Systems (ICIIS) 18-20 December 2019.
Abeynayake, G. et al. 2019. A review on MVdc collection systems for high-power offshore wind farms. Presented at: 14th IEEE International Conference on Industrial and Information Systems (ICIIS 2019) Peradeniya, Sri Lanka 18-20 December 2019. 2019 14th Conference on Industrial and Information Systems (ICIIS). IEEE. , pp.407-412. (10.1109/ICIIS47346.2019.9063352)
Ackerley, I. et al., 2019. Using deep learning to detect esophageal lesions in PET-CT scans. Presented at: SPIE Medical Imaging 2019 San Diego, California, USA 16-21 February 2019. Published in: Gimi, B. and Krol, A. eds. Proc. SPIE 10953, Medical Imaging 2019: Biomedical Applications in Molecular, Structural, and Functional Imaging. SPIE(10.1117/12.2511738)
Adams, R. et al. 2019. A novel pathway for efficient characterisation of additively manufactured thermoplastic elastomers. Materials and Design 180 107917. (10.1016/j.matdes.2019.107917)
Adebayo, P. 2019. Enhanced multi-user DMT spectrum management using polynomial matrix decomposition techniques. PhD Thesis , Cardiff University.
Ai, Q. et al., 2019. Feature extraction of four-class motor imagery EEG signals based on functional brain network. Journal of Neural Engineering 16 (2) 026032. (10.1088/1741-2552/ab0328)
Akhimien, N. et al. 2019. Implementation of circular economy using bio-based products in the indoor and outdoor environment. Presented at: 2019 International Symposium on the Infrastructure Development Liverpool, England 14 October, 2019.
Al Ibraheemi, M. M. A. et al. 2019. Memorized approach for implementation of space vector pulse width modulation. Periodicals of Engineering and Natural Sciences (PEN) 7 (4), pp.1892-1903. (10.21533/pen.v7i4.955)
Al-Azzawi, A. S. , Kawashita, L. and Featherston, C. 2019. A modified cohesive zone model for fatigue delamination in adhesive joints: numerical and experimental investigations. Composite Structures 225 111114. (10.1016/j.compstruct.2019.111114)
Al-Baghdadi, M. et al., 2019. The effect of magnetic field direction on thermoelectric and thermomagnetic coefficients of undoped single crystalline InSb at room temperature. IOP Conference Series: Materials Science and Engineering 671 012040. (10.1088/1757-899X/671/1/012040)
Al-Doboon, A. 2019. A novel blend, CARSOXY, as a working fluid for advanced gas turbine cycles. PhD Thesis , Cardiff University.
Al-Farraji, A. et al. 2019. Kinetics and performance of raw and torrefied biomass in a continuous bubbling fluidized bed gasifier.. Waste and Biomass Valorization 10 (5), pp.1365-1381. (10.1007/s12649-017-0167-8)
Al-Graitti, A. J. et al., 2019. A comparative study of the kinematic response and injury metrics associated with adults and children impacted by an auto rickshaw. Presented at: CompCom 2019: Intelligent Computing London, UK 16-17 July 2019. Published in: Arai, K. , Bhatia, R. and Kapoor, S. eds. Intelligent Computing: Proceedings of the 2019 Computing Conference, Volume 1. Vol. 997.Springer Verlag. , pp.424-443. (10.1007/978-3-030-22871-2_29)
Al-Graitti, A. 2019. Auto rickshaw impacts with pedestrians - A computational analysis of post-collision kinematics and injury mechanics. PhD Thesis , Cardiff University.
Al-Musawi, A. 2019. The development of new artificial intelligence based hybrid techniques combining bees algorithm, data mining and genetic algorithm for detection, classification and prediction of faults in induction motors. PhD Thesis , Cardiff University.
Al-Nadabi, A. A. and Cipcigan, L. 2019. Quasi dynamic simulation for the voltage control in the active networks, Oman Case Study. Presented at: 2019 54th International Universities Power Engineering Conference (UPEC) Bucharest, Romania 3-6 September 2019. 2019 54th International Universities Power Engineering Conference (UPEC). IEEE. , pp.1. (10.1109/UPEC.2019.8893529)
Al-Obaidi, A. 2019. Identification and quantification of radioactive impurities in medical radionuclides. PhD Thesis , Cardiff University.
Al-Omairi, B. 2019. MRI characterisation of the lumbar spine in lower trunk rotation. PhD Thesis , Cardiff University.
Al-Rawachy, A. 2019. Developing a multi-tone load-pull system for the direct extraction of Cardiff behavioural model coefficients. PhD Thesis , Cardiff University.
Al-Rawachy, A. et al., 2019. Behavioural model extraction using novel multitone active load-pull. Presented at: 2019 IEEE MTT-S International Microwave Symposium, IMS 2019 Boston, USA 2 -7 June 2019. MTT-S International Microwave Symposium (IMS). IEEE. , pp.196-199. (10.1109/MWSYM.2019.8700779)
Al-Rawachy, A. et al. 2019. Cardiff behavioural model analysis using a two-tone stimulus. Presented at: 2019 IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR) Orlando, FL, USA 20-23 January 2019. 2019 IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR). IEEE. , pp.5-8. (10.1109/PAWR.2019.8708726)
Al-Saymaree, M. 2019. Exact strip analysis and experiments on buckling and post-buckling of plates and stiffened panels with mode jumping. PhD Thesis , Cardiff University.
Al-Wakeel, A. , Wu, J. and Jenkins, N. 2019. Load estimation of domestic smart meter measurements using moving average and moving median techniques. Presented at: International Conference on Applied Energy Västerås, Sweden 12-15 Aug 2019.
Al-Zughaibi, A. 2019. Automotive suspension system modelling and controlling. PhD Thesis , Cardiff University.
Al-Zughaibi, A. , Xue, Y. and Grosvenor, R. 2019. A new insight into modelling passive suspension real test rig system with consideration of nonlinear friction forces. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 233 (8), pp.2257-2266. (10.1177/0954407018764942)
Al-Zughaibi, A. et al. 2019. Design and investigation of PA controller for driving nonlinear electro hydraulic actuator with new active suspension system model. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 233 (13), pp.3460-3479. (10.1177/0954407018822254)
Alamili, A. 2019. Kinetic energy recovery system design and control of the braking vehicle system. PhD Thesis , Cardiff University.
Alamili, A. , Xue, Y. and Anayi, F. 2019. An experimental and analytical study of the ultra-capacitor storage unit used in regenerative braking systems. Energy Procedia 159 , pp.376-381. (10.1016/j.egypro.2018.12.073)
Albadr, A. et al. 2019. Parametric study of honeycomb composite structure using open source finite element software. Presented at: 27th UK Association of Computational Mechanics Conference City, University of London, London, England April 2019. , pp.-.
Albadr, A. et al. 2019. Effects of honeycomb core on acoustic emission wave propagation in glass fibre composite plates. Presented at: the 58th Annual British Conference on Non-Destructive Testing Telford, UK 3 - 5 September 2019.
Albadr, A. et al. 2019. Effects of honeycomb core on acoustic emission wave propagation in glass fibre composite plates. Presented at: 58th Annual British Conference on Non-Destructive Testing Telford, UK 3 - 5 September 2019.
Albano, M. , Haddad, A. M. and Bungay, N. 2019. Is the dry-band characteristic a function of pollution and insulator design?. Energies 12 (19), pp.3607. (10.3390/en12193607)
Albasri, S. 2019. Modelling talking human faces. PhD Thesis , Cardiff University.
Albelwi, N. 2019. Assessing the environmental sustainability of the urban ecosystem using Material Flow Analysis: the case of Riyadh housing stock. PhD Thesis , Cardiff University.
Alboshmina, N. 2019. Ammonia cracking with heat transfer improvement technology. PhD Thesis , Cardiff University.
Alboshmina, N. A. , Valera Medina, A. and Alsaegh, A. S. 2019. Ammonia-hydrogen combustion in a swirl burner with reduction of NOx emissions. Energy Procedia 158 , pp.2305-2310. (10.1016/j.egypro.2019.01.265)
Alelwani, R. et al. 2019. Rawshan: Environmental impact of a vernacular shading building element in hot humid climates. Presented at: 2019 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC) Valbonne Sophia-Antipolis, France 17-19 June 2019. 2019 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC).
Alelwani, R. et al. 2019. Rawshan: environmental impact of a vernacular shading building element in hot humid climates. Presented at: 2019 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC) Valbonne Sophia-Antipolis, France 17-19 June 2019. 2019 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC). , pp.1-6. (10.1109/ICE.2019.8792589)
Alimohammadi, S. 2019. An investigation of the Matteucci effect on amorphous wires and its application to bend sensing. PhD Thesis , Cardiff University.
Alimohammadi, S. , Meydan, T. and Williams, P. 2019. Strain sensing by exploiting the Matteucci effect in amorphous wire. International Journal of Applied Electromagnetics and Mechanics 59 (1), pp.115-121. (10.3233/JAE-171225)
Allmark, M. et al. 2019. Energy yield assessment from ocean currents in the insular shelf of Cozumel Island. Journal of Marine Science and Engineering 7 (5), pp.-. 147. (10.3390/jmse7050147)
Almudaihesh, F. et al. 2019. The influence of water absorption on the damage mechanism of unidirectional and 2D woven CFRP.. Presented at: 22nd International Conference on Composite Materials (ICCM22 2019) Melbourne, Australia 11-16 August 2019. Proceedings of the 2019 International Conference on Compostie Materials. RMIT University
Almuramady, N. et al. 2019. Damage of functionalized self-assembly monomolecular layers applied to silicon microgear MEMS. Tribology International 129 , pp.202-213. (10.1016/j.triboint.2018.07.049)
Almutairi, A. 2019. Coastal community resilience assessment framework of maritime disasters management for Saudi Arabia. PhD Thesis , Cardiff University.
AlNajideen, M. , Al-Shidhani, M. and Gao, M. 2019. Optimum design of V-trough solar concentrator for photovoltaic applications. Presented at: 15th International Conference on Concentrator Photovoltaic Systems (CPV-15) Location: Fes, Morocco 25–27 Mar 2019. AIP Conference Proceedings. Vol. 2149.AIP Publishing. , pp.030001-. (10.1063/1.5124178)
Alqazzaz, S. et al., 2019. Automated brain tumor segmentation on multi-modal MR image using SegNet. Computational Visual Media 5 (2), pp.209-219. (10.1007/s41095-019-0139-y)
Alrebei, O. F. et al. 2019. CO2-Argon-Steam Oxy-Fuel production for (CARSOXY) gas turbines. Energies 12 (18) 3580. (10.3390/en12183580)
Alrebei, O. F. A. 2019. Carbon dioxide-Argon-Steam Oxyfuel (CARSOXY) gas turbines. PhD Thesis , Cardiff University.
Alruwaili, M. and Cipcigan, L. 2019. Optimal size of PV grid connected to low-voltage network in Saudi Arabia. Presented at: 54th International Universities Power Engineering Conference (UPEC) Bucharest, Romania 3-6 Sep 2019. 54th International Universities Power Engineering Conference (UPEC). IEEE. (10.1109/UPEC.2019.8893552)
Alsaegh, A. S. et al. 2019. Effects of different nozzle configurations on swirl flow topology in tangential swirl burners. Energy Procedia 158 , pp.2317-2322. (10.1016/j.egypro.2019.01.269)
Alsahali, S. et al. 2019. Supply modulator ripple in envelope tracking systems - effects and countermeasures. Presented at: 49th European Microwave Conference (EuMC 2019) Paris, France 01-03 October 2019. 2019 49th European Microwave Conference (EuMC). IEEE. , pp.710-713. (10.23919/EuMC.2019.8910890)
Alsahali, S. et al. 2019. A novel modulated rapid load pull system with digital pre-distortion capabilities. Presented at: 2019 93rd ARFTG Microwave Measurement Conference (ARFTG) Boston, MA, USA 7 June 2019. (10.1109/ARFTG.2019.8739220)
Alshammari, K. , Li, H. and Kwan, A. 2019. Security model collaborative building design. Presented at: 36th CIB W78 2019 Conference Newcastle, England, UK 18-20 September 2019. Proceedings of the 36th International Conference of CIB W78.
Alsyed, E. et al. 2019. Stability of PET radiomic features: A preclinical study [Abstract]. Presented at: Annual Congress of the European Association of Nuclear Medicine Barcelona, Spain 12-16 Oct 2019.
Alsyed, E. et al. 2019. The statistical influence of imaging time and segmentation volume on PET radiomic features: A preclinical study. Presented at: 2019 IEEE NSS-MIC 26 October - 2 November 2019. 2019 IEEE NSS-MIC. IEEE
Alt, A. et al. 2019. Impact of the input impedance on the linearity of supply modulated GaN HEMT power amplifiers. Presented at: European Microwave Week 2019 (EuMW2019) 29 September - 03 October 2019.
Alt, A. et al. 2019. Analysis of gain variation with changing supply voltages in GaN HEMTs for envelope tracking power amplifiers. IEEE Transactions on Microwave Theory and Techniques 67 (7), pp.2495-2504. (10.1109/TMTT.2019.2916404)
Alt, A. et al. 2019. Class B* - A new high efficiency RF DC/DC converter concept using second harmonic generation/injection. Presented at: WPTC 2018: IEEE MTT-S Wireless Power Transfer Conference Montreal, Quebec 3-7 June 2018. 2018 IEEE Wireless Power Transfer Conference (WPTC). IEEE(10.1109/WPT.2018.8639317)
Alzahrani, A. , Petri, I. and Rezgui, Y. 2019. Modelling and implementing smart micro-grids for fish-processing industry. Presented at: 2019 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC) Valbonne Sophia-Antipolis, France 17-19 June 2019. Proceedings 2019 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC). IEEE. , pp.-. (10.1109/ICE.2019.8792575)
Alzamil, Y. 2019. Optimising the quantitative analysis in functional pet brain imaging. PhD Thesis , Cardiff University.
Ameli, H. , Qadrdan, M. and Strbac, G. 2019. Coordinated operation strategies for natural gas and power systems in presence of gas-related flexibilities. IET Energy Systems Integration 1 (1), pp.3-13. (10.1049/iet-esi.2018.0047)
An, N. et al. 2019. Experimental study of moisture evaporation process with different soil characteristics. Japanese Geotechnical Society Special Publication 7 (2), pp.78-83. (10.3208/jgssp.v07.011)
Angioni, E. et al., 2019. Implementing fluorescent MOFs as down-converting layers in hybrid light-emitting diodes. Journal of Materials Chemistry. C 7 (8), pp.2394-2400. (10.1039/C9TC00067D)
Arega, F. , Lam, M. Y. and Lee, J. H. W. 2019. Supercritical stormwater flow interception through bottom rack with transverse barrier. Journal of Irrigation and Drainage Engineering 145 (4) 05019002. (10.1061/(ASCE)IR.1943-4774.0001371)
Azizian Fard, M. et al., 2019. Electrical treeing in power cable insulation under harmonics superimposed on unfiltered HVDC voltages. Energies 12 (16) 3113. (10.3390/en12163113)
Babayan, M. et al., 2019. Experimental investigation of flow and coherent properties of excited non-circular liquid jets. Journal of Applied Fluid Mechanics 12 (5), pp.1667-1681. (10.29252/jafm.12.05.29453)
Bai, Y. et al., 2019. Numerical predictions of wind induced buffeting vibration for structures by a developed pseudo excitation method. Journal of Low Frequency Noise, Vibration and Active Control 38 (2), pp.510-526. (10.1177/1461348419828248)
Bakthavatchaalam, V. et al. 2019. Gender and research productivity of academics in South India's Higher Education Institutions. Presented at: International Conference on Gender Research Rome 11-12 April 2019. Published in: Paoloni, P. , Paoloni, M. and Arduini, S. eds. Icgr 2019 - Proceedings of the 2nd International Conference on Gender Research. Academic Conferences and Publishing International Limited.
Balasubramaniam, S. et al. 2019. Power flow management in MTdc grids using series current flow controllers. IEEE Transactions on Industrial Electronics 66 (11), pp.8485-8497. (10.1109/TIE.2018.2890495)
Balasubramaniam, S. , Ugalde Loo, C. and Liang, J. 2019. Series current flow controllers for DC grids. IEEE Access 7 , pp.14779-14790. (10.1109/ACCESS.2019.2893450)
Balzano, B. et al. 2019. Building physically-based models for assessing rainfall-induced shallow landslide hazard at the catchment scale: the case study of the Sorrento Peninsula (Italy). Canadian Geotechnical Journal 56 (9), pp.1291-1303. (10.1139/cgj-2017-0611)
Balzano, B. , Tarantino, A. and Ridley, A. 2019. Preliminary analysis on the impacts of the rhizosphere on occurrence of rainfall-induced shallow landslides. Landslides 16 (10), pp.1885-1901. (10.1007/s10346-019-01197-5)
Bansal, M. et al., 2019. A parallel and efficient multi-split XFEM for 3-D analysis of heterogeneous materials. Computer Methods in Applied Mechanics and Engineering 347 , pp.365-401. (10.1016/j.cma.2018.12.023)
Bansal, M. et al., 2019. A simple and robust computational homogenization approach for heterogeneous particulate composites. Computer Methods in Applied Mechanics and Engineering 349 , pp.45-90. (10.1016/j.cma.2019.02.001)
Barati, M. , Petri, I. and Rana, O. F. 2019. Developing GDPR compliant user data policies for internet of things. Presented at: 12th IEEE/ACM International Conference on Utility and Cloud Computing Auckland, New Zealand 2-5 Dec 2019. Proceedings of the 12th IEEE/ACM International Conference on Utility and Cloud Computing. New York, USA: ACM. , pp.133-141. (10.1145/3344341.3368812)
Barter, M. 2019. Investigating simultaneous microwave dielectric and structural characterisation of heterogeneous gas sorption processes. PhD Thesis , Cardiff University.
Barter, M. et al. 2019. Temperature correction using degenerate modes for cylindrical cavity perturbation measurements. IEEE Transactions on Microwave Theory and Techniques 67 (2), pp.800-805. (10.1109/TMTT.2018.2882480)
Bastida, H. et al., 2019. Dynamic modelling and control of counter-flow heat exchangers for heating and cooling systems. Presented at: 54th International Universities Power Engineering Conference (UPEC) Bucharest, Romania 3-6 Sep 2019. 2019 54th International Universities Power Engineering Conference (UPEC). IEEE. (10.1109/UPEC.2019.8893634)
Bastida, H. et al. 2019. Thermal dynamic modelling and temperature controller design for a house. Energy Procedia 158 , pp.2800-2805. (10.1016/j.egypro.2019.02.041)
Bastida Hernandez, H. et al. 2019. Dynamic modelling and control of thermal energy storage. Energy Procedia 158 , pp.2890-2895. (10.1016/j.egypro.2019.01.942)
Beamish, R. , Ayre, W. N. and Evans, S. 2019. Prosthetic joint infection and aseptic loosening: could liposomes be the solution?. Presented at: International Society for Technology in Arthroplasty (ISTA) 31st Annual Congress London, England 10-13 October 2018. Vol. 101-B.Vol. Supple. British Editorial Society of Bone and Joint Surgery. (10.1302/1358-992X.2019.5.111)
Benakaprasad, B. et al. 2019. 90 GHz branch-line coupler on GaN-on-low resistivity silicon for MMIC technology. Presented at: 44th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz) Paris, France 1-6 Sept 2019. 44th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz). IEEE. , pp.-. (10.1109/IRMMW-THz.2019.8873748)
Bertolesi, E. 2019. Some considerations about the effects of the bonding length on the effectiveness of spike anchors in CFRP reinforcements of masonry. Key Engineering Materials 817 , pp.141-148. (10.4028/www.scientific.net/KEM.817.141)
Bertolesi, E. et al. 2019. Research and practice on masonry cross vaults? A review. Engineering Structures 180 , pp.67-88. (10.1016/j.engstruct.2018.10.085)
Bhaduri, D. et al. 2019. Evaluation of the surface integrity of aeroengine components following needle peening. Presented at: CIRP Winter Meeting 2019 Paris, France 20-22 Feb 2019.
Bhaduri, D. et al. 2019. Evaluation of surface / interface quality, microstructure and mechanical properties of hybrid additive-subtractive aluminium parts. CIRP Annals - Manufacturing Technology 68 (1), pp.237-240. (10.1016/j.cirp.2019.04.116)
Bie, S. and Li, H. 2019. BIM-based machine learning engine for building energy prediction. Presented at: 36th CIB W78 2019 Conference Newcastle, England, UK 18-20 September 2019.
Biggs, P. R. et al. 2019. Correlations between patient-perceived outcome and objectively-measured biomechanical change following total knee replacement. Gait and Posture 70 , pp.65-70. (10.1016/j.gaitpost.2019.02.028)
Biggs, P. , Holt, C. and Naili, J. E. 2019. Preoperative gait biomechanics and its relationship to functional outcome following total hip arthroplasty. Osteoarthritis and Cartilage 27 , pp.S121-S122. 144. (10.1016/j.joca.2019.02.179)
Biggs, P. R. et al. 2019. Which osteoarthritic gait features recover following total knee replacement surgery?. PLoS ONE 14 (1) e0203417. (10.1371/journal.pone.0203417)
Bin Abu Bakar, A. 2019. Modelling of intertidal floodplains for enhanced estuarine transport and decay of faecal indicator organisms from a diffuse source. PhD Thesis , Cardiff University.
Bogusz, A. et al. 2019. Design and characterisation of an outphasing power amplifier with balun combiner. Presented at: 2019 IEEE MTT-S International Microwave Conference on Hardware and Systems for 5G and Beyond (IMC-5G) Altanta, GA, USA 15-16 August 2019. 2019 IEEE MTT-S International Microwave Conference on Hardware and Systems for 5G and Beyond (IMC-5G). IEEE. , pp.1-3. (10.1109/IMC-5G47857.2019.9160351)
Bogusz, A. et al. 2019. Wideband compact planar balun for applications in outphasing and push-pull amplifiers. Electronics Letters 55 (16), pp.912-914. (10.1049/el.2018.7915)
Borodich, F. M. 2019. Development of Barenblatt's scaling approaches in solid mechanics and nanomechanics. Physical Mesomechanics 22 (1), pp.73-82. (10.1134/S1029959919010119)
Borodich, F. et al. 2019. Roughness of deposited carbon-based coatings and its statistical characteristics at nano and microscales. Frontiers in Mechanical Engineering 5 (4) 24. (10.3389/fmech.2019.00024)
Borodich, F. M. et al. 2019. Adhesive contact problems for a thin elastic layer: Asymptotic analysis and the JKR theory. Mathematics and Mechanics of Solids 24 (5), pp.1405-1424. (10.1177/1081286518797378)
Boulanouar, H. , Bayadi, A. and Haddad, A. 2019. Analysis of textured silicone rubber performance under contaminated conditions. IET Science Measurement and Technology 13 (3), pp.461-468. (10.1049/iet-smt.2018.5157)
Bowd, J. et al. 2019. Wide stance gait style compliments high tibial osteotomy in reducing knee joint loading. Osteoarthritis and Cartilage 27 , pp.S123-S124. 146. (10.1016/j.joca.2019.02.181)
Bowd, J. et al. 2019. Does gait retraining have the potential to reduce medial compartmental loading in individuals with knee osteoarthritis whilst not adversely affecting the other lower limb joints? A systematic review. Archives of Rehabilitation Research and Clinical Translation 1 (3-4) 100022. (10.1016/j.arrct.2019.100022)
Braxton, T. M. et al., 2019. Thermoneutrality improves skeletal impairment in adult Prader-Willi syndrome mice. Journal of Endocrinology 243 (3), pp.175-186. (10.1530/JOE-19-0279)
Brock, J. et al. 2019. An update on the role of Actovegin in musculoskeletal medicine: a review of the last 10 years. Clinical Journal of Sport Medicine 30 (1), pp.83-90. (10.1097/JSM.0000000000000566)
Budarapu, P. R. et al., 2019. Multiscale modeling of material failure: Theory and computational methods. Advances in Applied Mechanics 52 , pp.1-103. (10.1016/bs.aams.2019.04.002)
Burgoyne, T. et al., 2019. Three-dimensional structure of the basketweave Z-band in midshipman fish sonic muscle. Proceedings of the National Academy of Sciences 116 (31), pp.15534-15539. (10.1073/pnas.1902235116)
Cagni, E. et al. 2019. EP-2010 A QA method for evaluation of deformable image registration in head and neck adaptive radiotherapy. Radiotherapy and Oncology 133 , pp.S1101. (10.1016/S0167-8140(19)32430-2)
Cagni, E. et al. 2019. PO-0996 A knowledge-based tool to estimate the gain of re-planning strategy for Head and Neck (HN) ART. Radiotherapy and Oncology 133 (S1), pp.S548-S549. (10.1016/S0167-8140(19)31416-1)
Cai, L. et al., 2019. Active and diverse viruses persist in the deep sub-seafloor sediments over thousands of years. The ISME Journal: Multidisciplinary Journal of Microbial Ecology 13 (7), pp.1857-1864. (10.1038/s41396-019-0397-9)
Calabrese, L. et al., 2019. A soft robot structure with limbless resonant, stick and slip locomotion. Smart Materials and Structures 28 (10) 104005. (10.1088/1361-665X/ab3de1)
Cappello, T. et al., 2019. Supply- and load-modulated balanced amplifier for efficient broadband 5G base stations. IEEE Transactions on Microwave Theory and Techniques 67 (7), pp.3122-3133. (10.1109/TMTT.2019.2915082)
Castaneda, V. and Valera-Medina, A. 2019. Coanda flames for development of flat burners. Energy Procedia 158 , pp.1885-1890. (10.1016/j.egypro.2019.01.436)
Castañeda Gutierrez Otero, V. 2019. Development of flat flame burners for industrial heat transfer applications. PhD Thesis , Cardiff University.
Castellani, M. , Otri, S. and Pham, D. T. 2019. Printed circuit board assembly time minimisation using a novel Bees Algorithm. Computers and Industrial Engineering 133 , pp.186-194. (10.1016/j.cie.2019.05.015)
Castelli, A. et al. 2019. Revealing photoluminescence modulation from layered halide perovskite microcrystals upon cyclic compression. Advanced Materials 31 (1), pp.1805608. (10.1002/adma.201805608)
Cere, G. 2019. A consensus-based approach for structural resilience to earthquakes using machine learning techniques. PhD Thesis , Cardiff University.
Cere, G. , Rezgui, Y. and Zhao, W. 2019. Urban-scale framework for assessing the resilience of buildings informed by a delphi expert consultation. International Journal of Disaster Risk Reduction 36 101079. (10.1016/j.ijdrr.2019.101079)
Cernescu, A. and Pullin, R. 2019. New research findings on non-proportional low cycle fatigue. Presented at: 12th International Conference on Multiaxial Fatigue and Fracture (ICMFF12) Bordeaux, France 24-26 June 2019. Published in: Palin-Luc, T. , Morel, F. and Carpinteri, A. eds. Vol. 300., pp.08003. (10.1051/matecconf/201930008003)
Chandrasekar, H. et al., 2019. Quantifying temperature-dependent substrate loss in GaN-on-Si RF technology. IEEE Transactions on Electron Devices 66 (4), pp.1681-1687. (10.1109/TED.2019.2896156)
Chang, W. , Ismail, F. and Chizari, H. 2019. An entropy-stable residual distribution scheme for the system of two-dimensional inviscid shallow water equations. Bulletin of the Malaysian Mathematical Sciences Society 42 (4), pp.1745-1771. (10.1007/s40840-019-00719-7)
Chaudhary, M. A. et al., 2019. Auxiliary envelope tracking focused investigations of a 10W GaN HEMTs device. Presented at: 3rd International Conference on Circuits, Systems and Devices (ICCSD) Chengdu, China 23-25 Aug 2017. Proceedings of 3rd International Conference on Circuits, Systems and Devices (ICCSD). IEEE. , pp.92. (10.1109/ICCSD.2019.8843202)
Che, Y. et al., 2019. Demand response from the control of aggregated inverter air conditioners. IEEE Access 7 , pp.88163-88173. (10.1109/ACCESS.2019.2925659)
Chembukavu, A. A. , Mohammad, A. and Singh, D. N. 2019. Bioreactor landfills in developing countries: a critical review.. Journal of Solid Waste Technology and Management 45 (1), pp.21-38. (10.5276/JSWTM.2019.21)
Chen, C. et al. 2019. Energy consumption modelling using deep learning embedded semi-supervised learning. Computers and Industrial Engineering 135 , pp.757-765. (10.1016/j.cie.2019.06.052)
Chen, C. et al. 2019. Automobile maintenance prediction using deep learning with GIS data. Procedia CIRP 81 , pp.-. (10.1016/j.procir.2019.03.077)
Chen, C. , Wu, L. and Harbottle, M. 2019. Influence of biopolymer gel-coated fibres on sand reinforcement as a model of plant root behaviour. Plant and Soil 438 (1-2), pp.361-375. (10.1007/s11104-019-04033-w)
Chen, J. et al. 2019. An auto-correction teleoperation method for a mobile manipulator using gaze tracking and hand motion detection. Presented at: 20th Towards Autonomous Robotic Systems Conference (TAROS) London, UK 3-5 July 2019. TAROS 2019: Towards Autonomous Robotic Systems. Vol. 11650.Springer. , pp.422-433. (10.1007/978-3-030-25332-5_36)
Chen, L. et al., 2019. Structural shape optimization of three dimensional acoustic problems with isogeometric boundary element methods. Computer Methods in Applied Mechanics and Engineering 355 , pp.926-951. (10.1016/j.cma.2019.06.012)
Chen, M. 2019. Modelling of gas transport in coal - a hybrid coupled dual porosity and discrete fracture approach. PhD Thesis , Cardiff University.
Chen, M. et al. 2019. Dual porosity modelling of the coupled mechanical response of coal to gas flow and adsorption. International Journal of Coal Geology 205 , pp.115-125. (10.1016/j.coal.2019.01.009)
Chen, Q. et al., 2019. Further improvement in a criterion for human stability in floodwaters. Journal of Flood Risk Management 12 (3), pp.-. e12486. (10.1111/jfr3.12486)
Chen, Q. et al., 2019. Optimal planning for partially self-sufficient microgrid with limited annual electricity exchange with distribution grid. IEEE Access 7 123505. (10.1109/ACCESS.2019.2936762)
Chen, Q. et al. 2019. Impacts of topography change on saltwater intrusion over the past decade in the Changjiang Estuary. Estuarine, Coastal and Shelf Science 231 106469. (10.1016/j.ecss.2019.106469)
Chen, R. et al., 2019. Microstructure and hydraulic properties of coarse-grained subgrade soil used in high-speed railway at various compaction degrees. Journal of Materials in Civil Engineering 31 (12) 04019301. (10.1061/(ASCE)MT.1943-5533.0002972)
Chen, W. et al. 2019. A review of lithium-ion battery for electric vehicle applications and beyond. Energy Procedia 158 , pp.4363-4368. (10.1016/j.egypro.2019.01.783)
Chen, X. , Wang, Y. and Wu, Q. 2019. A bio-fuel power generation system with hybrid energy storage under a dynamic programming operation strategy. IEEE Access 7 , pp.64966 - 64977. (10.1109/ACCESS.2019.2911454)
Chen, Y. et al., 2019. Parameter extraction of PV models using an enhanced shuffled complex evolution algorithm improved by opposition-based learning. Energy Procedia 158 , pp.991-997. (10.1016/j.egypro.2019.01.242)
Chen, Y. et al., 2019. Joint probability analysis of extreme wave heights and surges along China's coasts. Ocean Engineering 177 , pp.97-107. (10.1016/j.oceaneng.2018.12.010)
Chen, Z. et al. 2019. Characterizing strip snap in cold rolling process using advanced data analytics. Procedia CIRP 81 , pp.453-458. (10.1016/j.procir.2019.03.078)
Chen, Z. et al. 2019. Strip snap analytics in cold rolling process using machine learning. Presented at: 2019 IEEE 15th International Conference on Automation Science and Engineering Vancouver, BC, Canada 22-26 August 2019. , pp.-.
Chernyshova, M. et al., 2019. Advantages of Al based GEM detector aimed at plasma soft-semi hard X-ray radiation imaging. Fusion Engineering and Design 146 , pp.1039-1042. (10.1016/j.fusengdes.2019.01.153)
Chong, C. T. et al., 2019. Oxygenated sunflower biodiesel: Spectroscopic and emissions quantification under reacting swirl spray conditions. Energy 178 , pp.804-813. (10.1016/j.energy.2019.04.201)
Chow, A. D. et al., 2019. Numerical wave basin using incompressible smoothed particle hydrodynamics (ISPH) on a single GPU with vertical cylinder test cases. Computers and Fluids 179 , pp.543-562. (10.1016/j.compfluid.2018.11.022)
Chua, K. et al. 2019. Effect of bridge abutment length on turbulence structure and flow through the opening. Journal of Hydraulic Engineering 145 (6) 04019024. (10.1061/(ASCE)HY.1943-7900.0001591)
Chung, H. et al., 2019. Topology optimization in OpenMDAO. Structural and Multidisciplinary Optimization 59 (4) 1385. (10.1007/s00158-019-02209-7)
Cimarelli, A. et al. 2019. On negative turbulence production phenomena in the shear layer of separating and reattaching flows. Physics Letters A 383 (10), pp.1019-1026. (10.1016/j.physleta.2018.12.026)
Cimarelli, A. et al. 2019. Resolved dynamics and subgrid stresses in separating and reattaching flows. Physics of Fluids 31 (9) 095101. (10.1063/1.5110036)
Cimarelli, A. , Abbà, A. and Germano, M. 2019. General formalism for a reduced description and modelling of momentum and energy transfer in turbulence. Journal of Fluid Mechanics 866 , pp.865-896. (10.1017/jfm.2019.124)
Cimarelli, A. , Abbà, A. and Germano, M. 2019. On the Eddy viscosity associated with the subgrid stresses. In: Salvetti, M. V. et al., Direct and Large-Eddy Simulation XI. Springer. , pp.101-106.
Cimarelli, A. et al. 2019. Reduced description and modelling of small-scale turbulence by means of a tensorial turbulent viscosity. Presented at: iTi Conference in Turbulence 2018 Bertinoro, Italy 3-7 September 2018. Published in: Orlu, R. et al., Progress in Turbulence VIII: Proceedings of the iTi Conference in Turbulence 2018. Springer. , pp.21-26. (10.1007/978-3-030-22196-6_4)
Claus, S. and Kerfriden, P. 2019. A CutFEM method for two-phase flow problems. Computer Methods in Applied Mechanics and Engineering 348 , pp.185-206. (10.1016/j.cma.2019.01.009)
Coppo, M. et al., 2019. Analysis of frequency distribution of ground fault-current magnitude in transmission networks for electrical safety evaluation. Electric Power Systems Research 173 , pp.100-111. (10.1016/j.epsr.2019.03.024)
Coz, N. 2019. Numerical and experimental modelling of tidal range structures with focus on conservation of momentum through hydraulic structures. PhD Thesis , Cardiff University.
Coz, N. , Ahmadian, R. and Falconer, R. A. 2019. Implementation of a full momentum conservative approach in modelling flow through tidal structures. Water 11 (9) 1917. (10.3390/w11091917)
Crane, R. and Sapsford, D. 2019. Tunable formation of copper metal, oxide, chloride and hydroxyl chloride nanoparticles from aqueous copper solutions using nanoscale zerovalent iron particles. Nanomaterials and Nanotechnology 9 , pp.1-16. (10.1177/1847980419886173)
Crayford, A. P. et al. 2019. Manufacture, characterization and stability limits of an AM prefilming air-blast atomizer. Presented at: ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition Phoenix, AZ, USA 17-21 June 2019. Turbo Expo: Power for Land, Sea and Air. Volume 4B: Combustion, Fuels, and Emissions. ASME. (10.1115/GT2019-91624)
Crivelli, D. et al. 2019. Condition monitoring of rotating machinery with acoustic emission: a British-Australian collaboration. In: Mathew, J. et al., Asset Intelligence through Integration and Interoperability and Contemporary Vibration Engineering Technologies. Lecture Notes in Mechanical Engineering Cham: Springer. , pp.119-128. (10.1007/978-3-319-95711-1_12)
Cuenca, J. A. et al. 2019. Microwave cavity perturbation of nitrogen doped nano-crystalline diamond films. Carbon 145 , pp.-. (10.1016/j.carbon.2018.12.025)
Daggett, A. , Qadrdan, M. and Jenkins, N. 2019. Feasibility of a battery storage system for a renewable energy park operating with price arbitrage. Presented at: 2017 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT-Europe) Torino, Italy 26-29 September 2017. IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT-Europe). Piscataway, NJ: IEEE(10.1109/ISGTEurope.2017.8260249)
De Nardi, C. et al. 2019. The development of mini-vascular networks for self-healing concrete. Presented at: Conference on Durable Concrete for Infrastructure under Severe Conditions Ghent 10 - 11 September 2019. Proceedings of LORCENIS Conference: Durable Concrete for Infrastructure under Severe Conditions : Smart Admixtures, self-responsiveness and nano-additions. Ghent: Magnel Laboratory for Concrete Research. , pp.19-23.
Deist, T. et al., 2019. OC-0544 Distributed learning on 20 000+ lung cancer patients. Radiotherapy and Oncology 133 (S1), pp.S287-S288. (10.1016/S0167-8140(19)30964-8)
Detheridge, A. et al., 2019. Deep seam and minesoil carbon sequestration potential of the South Wales Coalfield, UK. Journal of Environmental Management 248 109325. (10.1016/j.jenvman.2019.109325)
Dgali, N. 2019. Investigation of No-load and on-load performance of a model three-phase transformer core operating under sinusoidal and PWM voltage excitation. PhD Thesis , Cardiff University.
Dhanabalan, B. et al., 2019. Simple fabrication of layered halide perovskite platelets and enhanced photoluminescence from mechanically exfoliated flakes. Nanoscale 11 (17), pp.8334-8342. (10.1039/C9NR00638A)
Dillon, C. et al., 2019. Dissolving microneedle based transdermal delivery of therapeutic peptide analogues. International Journal of Pharmaceutics 565 , pp.9-19. (10.1016/j.ijpharm.2019.04.075)
Ding, C. et al., 2019. Model order reduction accelerated Monte Carlo stochastic isogeometric method for the analysis of structures with high-dimensional and independent material uncertainties. Computer Methods in Applied Mechanics and Engineering 349 , pp.266-284. (10.1016/j.cma.2019.02.004)
Doufene, D. , Bouazabia, S. and Haddad, A. 2019. Optimised performance of cap and pin insulator under wet pollution conditions using a mono-objective genetic algorithm. Australian Journal of Electrical and Electronics Engineering 16 (3), pp.149-162. (10.1080/1448837X.2019.1627740)
Drysdale, T. et al., 2019. Remote laboratories - Requirements capture for a national pooling infrastructure. Presented at: AdvanceHE STEM Teaching and Learning Conference 2019 Birmingham, UK 30 -31 January 2019.
Durand, E. 2019. Towards improved correction methodology for regulatory aircraft engine nvPM measurement. PhD Thesis , Cardiff University.
Duy Nguyen, V. et al., 2019. Molecular screening and genetic diversity analysis of anticancer Azurin-encoding and Azurin-like genes in human gut microbiome deduced through cultivation-dependent and cultivation-independent studies. International Microbiology 22 (4), pp.437-449. (10.1007/s10123-019-00070-8)
Dyer, C. et al. 2019. Computer-controlled electromagnetic control and image capture system for alignment of magnetic graphene nanofillers in epoxy composites. International Journal of Applied Electromagnetics and Mechanics 61 (S1), pp.S23-S29. (10.3233/JAE-192083)
Ebdon, T. 2019. The impact of turbulence and turbine operating condition on the wakes of tidal turbines. PhD Thesis , Cardiff University.
Eblabla, A. et al. 2019. Multi-channel AlGaN/GaN lateral schottky barrier diodes on low-resistivity silicon for sub-THz integrated circuits applications. IEEE Electron Device Letters 40 (6), pp.878-880. (10.1109/LED.2019.2912910)
Erbaş, B. , Aydin, Y. E. and Borodich, F. M. 2019. Indentation of thin elastic films glued to rigid substrate: Asymptotic solutions and effects of adhesion. Thin Solid Films 683 , pp.135-143. (10.1016/j.tsf.2019.05.038)
Evans, E. et al., 2019. EP-1666 ARENA: Improving training in target volume delineation for radiotherapy. Radiotherapy and Oncology 133 (S1), pp.S896-S897. (10.1016/S0167-8140(19)32086-9)
Evans, J. M. et al. 2019. Thopaz+ portable digital system for managing chest drains: a NICE medical technology guidance. Applied Health Economics and Health Policy 17 (3), pp.285 -294. (10.1007/s40258-019-00461-y)
Fasina, E. 2019. Localised energy systems in the Nigerian power network. PhD Thesis , Cardiff University.
Fatla, O. 2019. Development of convection in high-temperature coil annealing furnaces using rotating cylinders technique. PhD Thesis , Cardiff University.
Feng, S. Z. et al., 2019. A gradient weighted extended finite element method (GW-XFEM) for fracture mechanics. Acta Mechanica 230 (7), pp.2385-2398. (10.1007/s00707-019-02386-y)
Finocchiaro, D. et al., 2019. Partial volume effect of SPECT images in PRRT with 177Lu labelled somatostatin analogues: A practical solution. Physica Medica 57 , pp.153-159. (10.1016/j.ejmp.2018.12.029)
Fitt, D. et al. 2019. Uncertainty quantification of elastic material responses: testing, stochastic calibration and Bayesian model selection. Mechanics of Soft Materials 1 13. (10.1007/s42558-019-0013-1)
Foley, K. et al. 2019. Cyclo-oxygenase-2 expression is associated with mean standardised uptake value on 18F-fluorodeoxyglucose positron emission tomography in oesophageal adenocarcinoma. British Journal of Radiology 92 (1099) 20180668. (10.1259/bjr.20180668)
Foley, K. G. et al. 2019. External validation of a prognostic model incorporating quantitative PET image features in esophageal cancer. Radiotherapy and Oncology 133 , pp.205-212. (10.1016/j.radonc.2018.10.033)
Follett, E. , Hays, C. G. and Nepf, H. 2019. Canopy-mediated hydrodynamics contributes to greater allelic richness in seeds produced higher in meadows of the coastal eelgrass Zostera marina. Frontiers in Marine Science 6 8. (10.3389/fmars.2019.00008)
Francis, A. et al., 2019. A one point integration rule over star convex polytopes. Computers and Structures 215 , pp.43-64. (10.1016/j.compstruc.2019.01.001)
Freeman, B. L. , Cleall, P. J. and Jefferson, A. D. 2019. An indicator-based problem reduction scheme for coupled reactive transport models. International Journal for Numerical Methods in Engineering 120 (13), pp.1428-1455. (10.1002/nme.6186)
Fregni, A. et al., 2019. Direct numerical simulation of a buoyant triple jet at low-prandtl number. International Journal of Heat and Mass Transfer 143 118466. (10.1016/j.ijheatmasstransfer.2019.118466)
Gan, M. et al., 2019. A modified non-stationary tidal harmonic analysis model for the Yangtze estuarine tides. Journal of Atmospheric and Oceanic Technology 36 (4), pp.-. (10.1175/JTECH-D-18-0199.1)
Gan, M. et al., 2019. Application of modified nonstationary tidal harmonic analysis approach to data recovery of missing water level measurements of Yangtze Estuary. Presented at: 29th International Ocean and Polar Engineering Conference Honolulu; US 16-21 June 2019. Proceedings of the Twenty-ninth (2019) International Ocean and Polar Engineering Conference. Vol. 3.US: International Society of Offshore and Polar Engineers (ISOPE). , pp.3611-3616.
Gao, R. , Zhang, Y. and Kennedy, D. 2019. Reduction of hybrid FE-SEA model for the mid-frequency vibration of vibro-acoustic systems using dynamic condensation approach. Journal of Vibration and Acoustics 141 (4) 041007. (10.1115/1.4042930)
Gao, R. , Zhang, Y. and Kennedy, D. 2019. Topology optimization of sound absorbing layer for the mid-frequency vibration of vibro-acoustic systems. Structural and Multidisciplinary Optimization 59 (5), pp.1733-1746. (10.1007/s00158-018-2156-3)
Gao, S. , Wu, J. and Xu, B. 2019. Controllability evaluation of EV charging infrastructure transformed from gas stations in distribution networks with renewables. Energies 12 (8) 1577. (10.3390/en12081577)
Gao, T. et al., 2019. A seasonal forecast scheme for the Inner Mongolia spring drought part-II: a logical reasoning evidence-based method for spring predictions. Theoretical and Applied Climatology 136 (1-2), pp.703-715. (10.1007/s00704-018-2517-2)
Gatti, D. et al., 2019. Production, transport and dissipation of turbulent stresses across scales and space. Presented at: iTi Conference in Turbulence 2018 Bertinoro, Italy 3-7 September 2018. Published in: Orlu, R. et al., Progress in Turbulence VIII: Proceedings of the iTi Conference in Turbulence 2018. Springer(10.1007/978-3-030-22196-6_19)
Gatti, D. et al., 2019. An efficient numerical method for the generalised Kolmogorov equation. Journal of Turbulence 20 (8), pp.457-480. (10.1080/14685248.2019.1664746)
Giasin, K. et al. 2019. Effect of machining parameters and cutting tool coating on hole quality in dry drilling of fibre metal laminates. Composite Structures 212 , pp.159-174. (10.1016/j.compstruct.2019.01.023)
Gibbs, R. M. 2019. Imaging stray magnetic fields using 3D scanning techniques. PhD Thesis , Cardiff University.
Gkoura, L. et al., 2019. 1H NMR tests on damaged and undamaged XLPE and SiR samples. High Voltage 4 (3), pp.203-209. (10.1049/hve.2019.0077)
Glessgen, C. et al., 2019. Evaluation of 3D fat-navigator based retrospective motion correction in the clinical setting of patients with brain tumors. Neuroradiology 61 (5), pp.557-563. (10.1007/s00234-019-02160-w)
Goltsos, T. E. et al. 2019. The boomerang returns? Accounting for the impact of uncertainties on the dynamics of remanufacturing systems. International Journal of Production Research 57 (23), pp.7361-7394. (10.1080/00207543.2018.1510191)
Gong, Y. et al. 2019. LES of flow through and around a finite patch of thin plates. Water Resources Research 55 (9), pp.7587-7605. (10.1029/2018WR023462)
Goonetillake, J. F. 2019. A framework for the integration of information requirements within infrastructure digital construction. PhD Thesis , Cardiff University.
Grande, E. et al., 2019. Modelling of the bond behaviour of curved masonry specimens strengthened by CFRP with anchor spikes. Composites Part B: Engineering 171 , pp.235-245. (10.1016/j.compositesb.2019.04.027)
Greto, G. and Kulasegaram, S. 2019. Correction to: An efficient and stabilised SPH method for large strain metal plastic deformations. Computational Particle Mechanics (10.1007/s40571-019-00292-7)
Gretsch, F. et al., 2019. Fat navigators and Moiré phase tracking comparison for motion estimation and retrospective correction. Magnetic Resonance in Medicine 83 (1), pp.83-93. (10.1002/mrm.27908)
Groves, L. M. et al. 2019. Fluorescent functionalised naphthalimides and their Au(i)–NHC complexes for potential use in cellular bioimaging. Dalton Transactions 48 (5), pp.1599-1612. (10.1039/C8DT04069A)
Guan, D. et al., 2019. On the AIC-based model reduction for the general Holzapfel-Ogden myocardial constitutive law. Biomechanics and Modeling in Mechanobiology 18 , pp.1213-1232. (10.1007/s10237-019-01140-6)
Guerriero, A. et al., 2019. BIM4VET, Towards BIM training recommendation for AEC professionals. Presented at: 35th CIB W78 2018 Conference: IT in Design, Construction, and Management Chicago, IL, USA 1-3 October 2018. Published in: Mutis, I. and Hartmann, T. eds. Advances in Informatics and Computing in Civil and Construction Engineering: Proceedings of the 35th CIB W78 2018 Conference: IT in Design, Construction, and Management. Cham: Springer. , pp.833-840. (10.1007/978-3-030-00220-6_100)
Gumbleton, R. et al. 2019. Evaluating the coefficient of thermal expansion of additive manufactured AlSi10Mg using microwave techniques. Additive Manufacturing 30 100841. (10.1016/j.addma.2019.100841)
Gumbleton, R. et al. 2019. Effects of post-processing treatments on the microwave performance of additively manufactured samples. Presented at: 13th European Conference on Antennas and Propagation (EuCAP) 2019 UK 31 March - 5 April 2019.
Guteša Božo, M. et al., 2019. Fuel rich ammonia-hydrogen injection for humidified gas turbines. Applied Energy 251 113334. (10.1016/j.apenergy.2019.113334)
Gutesa Bozo, M. et al., 2019. Fuel quality impact analysis for practical implementation of corn COB gasification gas in conventional gas turbine power plants. Biomass and Bioenergy 122 , pp.221-230. (10.1016/j.biombioe.2019.01.012)
Hamzah, H. et al. 2019. A compact microwave applicator for the rapid detection of clostridium difficile. Presented at: 2019 IEEE MTT-S International Microwave Biomedical Conference (IMBioC) Nanjing, China 6-8 May 2019. 2019 IEEE MTT-S International Microwave Biomedical Conference (IMBioC). IEEE. (10.1109/IMBIOC.2019.8777882)
Han, F. et al., 2019. An intelligent fault diagnosis method for PV arrays based on an improved rotation forest algorithm. Energy Procedia 158 , pp.6132-6138. (10.1016/j.egypro.2019.01.498)
Han, Q. , Gu, H. and Setchi, R. 2019. Discrete element simulation of powder layer thickness in laser additive manufacturing. Powder Technology 352 , pp.91-102. (10.1016/j.powtec.2019.04.057)
Han, Q. et al. 2019. Additive manufacturing of high-strength crack-free Ni-based Hastelloy X superalloy. Additive Manufacturing 30 100919. (10.1016/j.addma.2019.100919)
Han, Q. and Jiao, Y. 2019. Effect of heat treatment and laser surface remelting on AlSi10Mg alloy fabricated by selective laser melting. International Journal of Advanced Manufacturing Technology 102 (9-12), pp.3315 -3324. (10.1007/s00170-018-03272-y)
Hao, Y. et al., 2019. A novel clustering algorithm based on mathematical morphology for wind power generation prediction. Renewable Energy 136 , pp.572-585. (10.1016/j.renene.2019.01.018)
Hargreaves, S. et al. 2019. Interim 18F-FDG positron emission tomography/computed tomography during chemoradiotherapy in the management of cancer patients: a response [Letter]. Clinical Oncology 31 (9), pp.669-670. (10.1016/j.clon.2019.05.005)
Harrold, M. and Ouro, P. 2019. Rotor loading characteristics of a full-scale tidal turbine. Energies 12 (6), pp.1035. (10.3390/en12061035)
Hefford, S. J. 2019. Microwave processing in additive manufacturing. PhD Thesis , Cardiff University.
Herbert, J. 2019. The behaviour of mineral matter from pulverised coal injection in the blast furnace raceway. PhD Thesis , Cardiff University.
Hernández, J. D. , Moll, M. and Kavraki, L. E. 2019. Lazy evaluation of goal specifications guided by motion planning. Presented at: IEEE International Conference on Robotics and Automation (ICRA) Montreal, Canada 20-24 May 2019. Proceedings of the IEEE International Conference on Robotics and Automation (ICRA). IEEE. , pp.944-950. (10.1109/ICRA.2019.8793570)
Hernández, J. D. et al. 2019. Online motion planning for unexplored underwater environments using autonomous underwater vehicles. Journal of Field Robotics 36 (2), pp.370-396. (10.1002/rob.21827)
Hewlett, S. et al. 2019. Gas turbine co-firing of steelworks ammonia with coke oven gas or methane: A fundamental and cycle Analysis. Presented at: ASME Turbo Expo 2019 Phoenix, Arizona, USA 17-21 June 2019. ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition: Volume 3: Coal, Biomass, Hydrogen, and Alternative Fuels; Cycle Innovations; Electric Power; Industrial and Cogeneration; Organic Rankine Cycle Power Systems. ASME. , pp.GT2019-91404. (10.1115/GT2019-91404)
Hickey, B. et al. 2019. Can we use biomarkers of coagulation to predict which patients with foot and ankle injury will develop vein thrombosis?. Foot and Ankle Surgery 25 (1), pp.59-62. (10.1016/j.fas.2017.08.002)
Hiley, L. et al., 2019. Discriminating spatial and temporal relevance in deep Taylor decompositions for explainable activity recognition. Presented at: 28th International Joint Conference on Artificial Intelligence (IJCAI-19) Macao, China 10-16 August 2019.
Hill, J. L. et al. 2019. The practical exploitation of tacit machine tool intelligence. International Journal of Advanced Manufacturing Technology 104 (5-8), pp.1693-1707. (10.1007/s00170-019-03963-0)
Hodorog, A. et al. 2019. Social media mining for BIM skills and roles for energy efficiency. Presented at: 2019 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC) Valbonne Sophia-Antipolis, France 17-19 June 2019. Conference Proceedings ICE/IEEE ITMC 2019: Co-creating our Future: Scaling-up Innovation Capacities through the Design and Engineering of Immersive, Collaborative, Empathic and Cognitive Systems. IEEE. , pp.1-10. (10.1109/ICE.2019.8792571)
Honzawa, T. et al., 2019. Predictions of NO and CO emissions in ammonia/methane/air combustion by LES using a non-adiabatic flamelet generated manifold. Energy 186 115771. (10.1016/j.energy.2019.07.101)
Horne, R. et al., 2019. An on body accelerometer system for streaming therapy data using COTS UHF RFID. Presented at: 2019 IEEE International Conference on RFID Technology and Applications (RFID-TA) Pisa, Italy 25-27 September 2019. 2019 IEEE International Conference on RFID Technology and Applications (RFID-TA). IEEE. , pp.301. (10.1109/RFID-TA.2019.8892220)
Hou, J. et al., 2019. Magic auxeticity angle of graphene. Carbon 149 , pp.350-354. (10.1016/j.carbon.2019.04.057)
Howell, S. K. et al. 2019. User centered neuro-fuzzy energy management through semantic-based optimization. IEEE Transactions on Cybernetics 49 (9), pp.3278-3292. (10.1109/TCYB.2018.2839700)
Hu, X. et al., 2019. Modeling of high-frequency current transformer based partial discharge detection in high-voltage cables. IEEE Transactions on Power Delivery 34 (4), pp.1549-1556. (10.1109/TPWRD.2019.2910076)
Hua, W. and Sun, H. 2019. A blockchain-based peer-to-peer trading scheme coupling energy and carbon market. Presented at: 2nd International Conference on Smart Energy Systems and Technologies (SEST 2019) Porto, Portugal 9-11 September 2019. 2019 International Conference on Smart Energy Systems and Technologies (SEST). IEEE. , pp.1-6. (10.1109/SEST.2019.8849111)
Hua, W. , You, M. and Sun, H. 2019. Real-time price elasticity reinforcement learning for low carbon energy hub scheduling based on conditional random field. Presented at: 2019 IEEE/CIC International Conference on Communications Workshops in China (ICCC Workshops) Changchun, China 11-13 August 2019. 2019 IEEE/CIC International Conference on Communications Workshops in China (ICCC Workshops). IEEE. , pp.204-209. (10.1109/ICCChinaW.2019.8849941)
Husseini, T. et al. 2019. Global behavioural model generation using coefficients interpolation. Presented at: 2019 IEEE MTT-S International Microwave Symposium, IMS 2019 Boston, USA 2 -7 June 2019. , pp.-.
Hutt, S. et al. 2019. The acoustic emission from asperity interactions in mixed lubrication. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 475 (2227) 20180900. (10.1098/rspa.2018.0900)
Hutt, S. M. et al. 2019. Characterising the acoustic emission from a simulated gear contact in mixed lubrication conditions. Presented at: 6th International Conference on Condition Monitoring of Machinery in Non-Stationary Operations Santander, Spain 20 - 22 June 2018. Published in: Fernandez Del Rincon, A. et al., Advances in Condition Monitoring of Machinery in Non-Stationary Operations: Proceedings of the 6th International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO’2018, 20-22 June 2018, Santander, Spain. Vol. 15.Applied Condition Monitoring Cham: Springer. , pp.400-408. (10.1007/978-3-030-11220-2_41)
Irfan, M. et al. 2019. GIS-based investigation of historic landfill sites in the coastal zones of Wales (UK). Euro-Mediterranean Journal for Environmental Integration 4 (1) 26. (10.1007/s41207-019-0116-y)
Jang, G. et al., 2019. Configuration optimization for thin structures using level set method. Structural and Multidisciplinary Optimization 59 (6) 1881. (10.1007/s00158-019-02246-2)
Jayasuriya, L. et al. 2019. Energy hub modelling for multi-scale and multi-energy supply systems. Presented at: 13th IEEE PowerTech 2019 Milano, Italy 23 - 27 June 2019. Proceedings 2019 IEEE Milan PowerTech. IEEE. (10.1109/PTC.2019.8810641)
Jeyakumar, L. et al., 2019. Modelling high rate P-removal in a two-stage pilot scale alum sludge based constructed wetland system. Environmental Engineering and Management Journal 18 (2), pp.359-366.
Ji, H. et al., 2019. A decentralized voltage control strategy of soft open points in active distribution networks. Energy Procedia 159 , pp.412–417. (10.1016/j.egypro.2018.12.067)
Jia, Y. et al., 2019. Force and deformation characteristics during the reconstruction and expansion of shallow single-tube tunnels into large-span multiarch tunnels. Advances in Materials Science and Engineering 2019 2783784. (10.1155/2019/2783784)
Jiang, Z. et al., 2019. Data-driven ecological performance evaluation for remanufacturing process. Energy Conversion and Management 198 111844. (10.1016/j.enconman.2019.111844)
Jiao, Y. et al. 2019. Investigations in nanosecond laser micromachining on the Zr52.8Cu17.6Ni14.8Al9.9Ti4.9 bulk metallic glass: experimental and theoretical study. Journal of Materials Processing Technology 273 116232. (10.1016/j.jmatprotec.2019.05.013)
Jiao, Y. , He, W. and Shen, X. 2019. Enhanced high cycle fatigue resistance of Ti-17 titanium alloy after multiple laser peening without coating. International Journal of Advanced Manufacturing Technology 104 (1-4), pp.1333-1343. (10.1007/s00170-019-03993-8)
Jie, X. et al., 2019. The decarbonisation of petroleum and other fossil hydrocarbon fuels for the facile production and safe storage of hydrogen. Energy and Environmental Science 12 (1), pp.238-249. (10.1039/C8EE02444H)
Jin, T. H. , Shin, K. Y. and Cipcigan, L. 2019. Real-time simulation of multi-grid system for the improvement of grid reliability and operating efficiency by using battery energy storage system. Presented at: 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2019) Wroclaw, Poland 23-28 June 2019.
Jin, X. et al. 2019. Scheduling distributed energy resources and smart buildings of a microgrid via multi-time scale and model predictive control method. IET Renewable Power Generation 13 (6), pp.816-833. (10.1049/iet-rpg.2018.5567)
Jing, R. et al. 2019. Exploring the impact space of different technologies using a portfolio constraint based approach for multi-objective optimization of integrated urban energy systems. Renewable and Sustainable Energy Reviews 113 109249. (10.1016/j.rser.2019.109249)
Jing, R. et al. 2019. Comparative study of posteriori decision-making methods when designing building integrated energy systems with multi-objectives. Energy and Buildings 194 , pp.123-139. (10.1016/j.enbuild.2019.04.023)
Jing, R. et al. 2019. Distributed or centralized? Designing district-level urban energy systems by a hierarchical approach considering demand uncertainties. Applied Energy 252 113424. (10.1016/j.apenergy.2019.113424)
Joldes, G. et al., 2019. Suite of meshless algorithms for accurate computation of soft tissue deformation for surgical simulation. Medical Image Analysis 56 , pp.152-171. (10.1016/j.media.2019.06.004)
Jones, J. 2019. Controlling magnetic domain wall pinning using atomic force microscope tip-based nanomachining. PhD Thesis , Cardiff University.
Jones, P. et al. 2019. Do changes in feature selection parameters influence the classification of knee rehabilitation exercises when using body worn accelerometer data?. Osteoarthritis and Cartilage 27 (S1) S400. (10.1016/j.joca.2019.02.401)
Jose, K. 2019. Mitigating the effects of low-inertia on HVDC-rich AC grids. PhD Thesis , Cardiff University.
Joseph, T. et al. 2019. Dynamic average converter model for MVDC link harmonic analysis. Presented at: 13th IEEE PowerTech 2019 Milano, Italy 23 - 27 June 2019. , pp.-.
Joseph, T. et al. 2019. Dynamic average converter model for MVDC link harmonic analysis. Presented at: 13th IEEE PowerTech 2019 Milano, Italy 23 - 27 June 2019. Proceedings 2019 IEEE Milan PowerTech. IEEE. (10.1109/PTC.2019.8810551)
Joseph, T. et al. 2019. Real-time hardware-in-the-loop platform for hybrid AC/DC power system studies. Presented at: IEEE PES PowerTech Milano 2019 23-27 June 2019.
Joseph, T. et al. 2019. Real-time hardware-in-the-loop platform for hybrid AC/DC power system studies. Presented at: 13th IEEE PowerTech 2019 Milano, Italy 23-27 June 2019. IEEE Milan PowerTech. IEEE. (10.1109/PTC.2019.8810905)
Justo de Araújo, A. R. et al. 2019. Optimization of tower-footing grounding impedance for guyed-V transmission towers. Electric Power Systems Research 177 105947. (10.1016/j.epsr.2019.105947)
Kajati, E. et al., 2019. Cloud based cyber-physical systems: Network evaluation study. Advanced Engineering Informatics 42 100988. (10.1016/j.aei.2019.100988)
Kandasamy, J. et al. 2019. Can real-time feedback improve the simulated infant cardiopulmonary resuscitation performance of basic life support and lay rescuers?. Archives of Disease in Childhood 104 (8), pp.493-801. (10.1136/archdischild-2018-316576)
Kanteh Sakiliba, S. 2019. Integrated modelling and analysis of buildings and community energy systems. MPhil Thesis , Cardiff University.
Karihaloo, B. L. and Xiao, Q. Z. 2019. Asymptotic crack tip fields in linear and nonlinear materials and their role in crack propagation. Physical Mesomechanics 22 (1), pp.18-31. (10.1134/S1029959919010053)
Katili, I. et al., 2019. A unified polygonal locking-free thin/thick smoothed plate element. Composite Structures 219 , pp.147-157. (10.1016/j.compstruct.2019.03.020)
Keenan, B. E. and Evans, S. 2019. Biomechanical testing of hip protectors following the Canadian Standards Association express document. Osteoporosis International (10.1007/s00198-019-04914-x)
Kerfriden, P. , Kundu, A. and Claus, S. 2019. Adaptivity in bayesian inverse finite element problems: learning and simultaneous control of discretisation and sampling errors. Materials 12 (4) 642. (10.3390/ma12040642)
Khajah, T. , Antoine, X. and Bordas, S. P. A. 2019. B-Spline FEM for time-harmonic acoustic scattering and propagation. Journal of Theoretical and Computational Acoustics 27 (03) 1850059. (10.1142/S2591728518500597)
Khalid, G. A. et al. 2019. A coupled physical-computational methodology for the investigation of short fall related infant head impact injury. Forensic Science International 300 , pp.170-186. (10.1016/j.forsciint.2019.04.034)
Khatib, N. et al. 2019. Dynamic medial knee overloading influences inflammation and bone remodeling in the degenerative knee [Abstract]. Osteoarthritis and Cartilage 27 (S1), pp.S44. 29. (10.1016/j.joca.2019.02.063)
Khazraji, S. 2019. Machining of Fe49Co2V alloys used in electrical machines; investigation and evaluation of coating effects on their magnetic and mechanical properties. PhD Thesis , Cardiff University.
Khudhair, A. and Li, H. 2019. Knowledge-driven holistic decision making supporting multi-objective innovative design. Presented at: 2nd International Conference on Sustainable Smart Manufacturing Manchester, United Kingdom 9-11 April, 2019.
Kim, S. , Pan, S. and Mase, H. 2019. Artificial neural network-based storm surge forecast model: Practical application to Sakai Minato, Japan. Applied Ocean Research 91 101871. (10.1016/j.apor.2019.101871)
King, J. A. 2019. Investigation and prediction of pollution in coastal and estuarine waters, using experimental and numerical methods. PhD Thesis , Cardiff University.
King, J. and Lind, S. 2019. The Kaye effect: new experiments and a mechanistic explanation. Journal of Non-Newtonian Fluid Mechanics 273 104165. (10.1016/j.jnnfm.2019.104165)
Kloukinas, P. et al., 2019. Strength of materials and masonry structures in Malawi. Presented at: 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019) Cape Town, South Africa 2-4 September 2019. Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications: Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), September 2-4, 2019, Cape Town, South Afr. CRC Press.
Kloukinas, P. et al., 2019. A building classification scheme of housing stock in Malawi for earthquake risk assessment. Journal of Housing and the Built Environment , pp.-. (10.1007/s10901-019-09697-5)
Kőrösi, L. et al., 2019. Nanostructured TiO2-induced photocatalytic stress enhances the antioxidant capacity and phenolic content in the leaves of Vitis vinifera on a genotype-dependent manner. Journal of Photochemistry and Photobiology B: Biology 190 , pp.137-145. (10.1016/j.jphotobiol.2018.11.010)
Kossovich, E. et al., 2019. Connections between micro/nano scale heterogeneity of mechanical properties of coals and their propensity to outbursts and crushing. Mining Informational and Analytical Bulletin 5 , pp.156-172. (10.25018/0236-1493-2019-05-0-156-172)
Kossovich, E. L. et al., 2019. Mechanical, structural and scaling properties of coals: depth sensing indentation studies. Applied Physics A: Materials Science and Processing 125 , pp.-. 195. (10.1007/s00339-018-2282-1)
Krokos, V. et al. 2019. Optimization of patterned surfaces for Improved superhydrophobicity through cost-effective large-scale computations. Langmuir 35 (20), pp.6793-6802. (10.1021/acs.langmuir.9b00588)
Kulasegaram, S. and Mimoun, A. 2019. An efficient computational procedure for modelling the flow of fibre suspended self-compacting concrete. Presented at: PARTICLES 2019 VI International Conference on Particle-Based Methods. Fundamentals and Applications, Barcelona, Spain. 28-30 October 2019.
Kumar, D. et al., 2019. Correction: high performing AgNW transparent conducting electrodes with a sheet resistance of 2.5 Ω Sq−1 based upon a roll-to-roll compatible post-processing technique. Nanoscale 11 (12), pp.5771-5771. (10.1039/C9NR90049G)
Kumar, D. et al., 2019. High performing AgNW transparent conducting electrodes with a sheet resistance of 2.5 ? Sq?1 based upon a roll-to-roll compatible post-processing technique. Nanoscale 11 , pp.5760-5769. (10.1039/C8NR07974A)
Kundu, A. et al. 2019. A generic framework for application of machine learning in acoustic emission-based damage identification. Presented at: 13th International Conference on Damage Assessment of Structures 9-10 July 2019. Proceedings of the 13th International Conference on Damage Assessment of Structures. Lecture Notes in Mechanical Engineering Springer. , pp.244-262. (10.1007/978-981-13-8331-1_18)
Kuster, C. 2019. A real time urban sustainability assessment framework for the smart city paradigm. PhD Thesis , Cardiff University.
Kuster, C. et al. 2019. A simplified geo-cluster definition for energy system planning in Europe. Energy Procedia 158 , pp.3222-3227. (10.1016/j.egypro.2019.01.1001)
Lakatos, G. et al., 2019. Effects of previous exposure on children's perception of a humanoid robot. Presented at: International Conference on Social Robotics Madrid, Spain 26-29 Nov 2019. Published in: Salichs, M. A. et al., Social Robotics. Vol. 11876.Cham, Switzerland: Springer Verlag. , pp.14-23. (10.1007/978-3-030-35888-4_2)
Lam, M. Y. , Ghidaoui, M. S. and Kolyshkin, A. A. 2019. Hydraulics of shallow shear flows: onset, development and practical relevance. Environmental Fluid Mechanics 19 (5), pp.1121–1142. (10.1007/s10652-019-09682-0)
Lang, L. Z. et al., 2019. Linkage between swelling pressure, total suction of saturated bentonites and suction of saturating aqueous solutions. Applied Clay Science 171 , pp.82-91. (10.1016/j.clay.2019.02.007)
Lara, L. A. et al., 2019. Design and characterization of a magneto-dielectric composite in high frequency with aligned magnetite powders. Journal of Physics: Conference Series 1386 (1), pp.1-7. 012103. (10.1088/1742-6596/1386/1/012103)
Lee, J. P. et al., 2019. A quantum dot as a source of time-bin entangled multi-photon states. Quantum Science and Technology 4 (2) 025011. (10.1088/2058-9565/ab0a9b)
Lee, L. Y. et al., 2019. Investigation of MOVPE-grown zincblende GaN nucleation layers on 3C-SiC/Si substrates. Journal of Crystal Growth 524 125167. (10.1016/j.jcrysgro.2019.125167)
Lee, L. Y. et al., 2019. Investigation of stacking faults in MOVPE-grown zincblende GaN by XRD and TEM. Journal of Applied Physics 125 105303. (10.1063/1.5082846)
Lewis, M. et al., 2019. Power variability of tidal-stream energy and implications for electricity supply. Energy 183 , pp.1061-1074. (10.1016/j.energy.2019.06.181)
Lewis, T. 2019. Optimisation of a chronically implanted catheter for intraparenchymal delivery of therapeutics to the brain. PhD Thesis , Cardiff University.
Li, B. et al., 2019. Research on torque characteristics of a modular arc-linear flux switching permanent-magnet motor. IEEE Access 7 57312. (10.1109/ACCESS.2019.2913952)
Li, G. et al. 2019. Feasibility and reliability analysis of LCC DC grids and LCC/VSC hybrid DC grids. IEEE Access 7 , pp.22445-22456. (10.1109/ACCESS.2019.2898387)
Li, G. et al. 2019. Analysis of single-phase-to-ground faults at the valve-side of HB-MMCs in HVDC Systems. IEEE Transactions on Industrial Electronics 66 (3), pp.2444-2453. (10.1109/TIE.2018.2829666)
Li, G. et al. 2019. Control strategies of full-voltage to half-voltage operation for LCC and hybrid LCC/MMC based UHVDC systems. Energies 12 (4), pp.742. (10.3390/en12040742)
Li, G. et al. 2019. Comparisons of MVAC and MVDC systems in dynamic operation, fault protection and post-fault restoration. Presented at: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society Lisbon, Portugal 14-17 October 2019. IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society. IEEE. , pp.5657-5662. (10.1109/IECON.2019.8927251)
Li, H. , Zebouchi, N. and Haddad, A. 2019. Theoretical and practical investigations of spacer models for future HVDC GIL/GIS applications. Presented at: 21st International Symposium on High Voltage Engineering Frankfurt, Germany 11-15 March 2019. Published in: Németh, B. ed. Proceedings of the 21st International Symposium on High Voltage Engineering. Vol. 2.Lecture Notes in Electrical Engineering Springer Science Business Media. , pp.1538-1549. (10.1007/978-3-030-31680-8_145)
Li, H. , Wu, Z. and Jiang, T. 2019. A novel quasi-zero stiffness vibration isolator based on hybrid bistable composite laminate. Presented at: AIAA Scitech 2019 Forum San Diego, California 7-11 January 2019. AIAA Scitech 2019 Forum Proceedings. American Institute of Aeronautics and Astronautics Inc. , pp.1860. (10.2514/6.2019-1860)
Li, L. et al., 2019. High efficiency solar power generation with improved discontinuous pulse width modulation (DPWM) overmodulation algorithms. Energies 12 (9) 1765. (10.3390/en12091765)
Li, P. et al., 2019. A unified energy bus based multi-energy flow modeling method of integrated energy system. Energy Procedia 159 , pp.418-423. (10.1016/j.egypro.2018.12.066)
Li, P. et al., 2019. A combined central and local voltage control strategy of soft open points in active distribution networks. Energy Procedia 158 , pp.2524-2529. (10.1016/j.egypro.2019.01.410)
Li, P. et al., 2019. Optimal operation of soft open points in active distribution networks under three-phase unbalanced conditions. IEEE Transactions on Smart Grid 10 (1), pp.380-391. (10.1109/TSG.2017.2739999)
Li, P. et al., 2019. Combined decentralized and local voltage control strategy of soft open points in active distribution networks. Applied Energy 241 , pp.613-624. (10.1016/j.apenergy.2019.03.031)
Li, P. et al., 2019. Voltage control method of distribution networks using PMU based sensitivity estimation. Energy Procedia 158 , pp.2707-2712. (10.1016/j.egypro.2019.02.026)
Li, P. et al., 2019. Determination of local voltage control strategy of distributed generators in active distribution networks based on kriging metamodel. IEEE Access 7 , pp.34438-3536. (10.1109/ACCESS.2019.2904144)
Li, Q. 2019. High-resolution numerical schemes for compressible flows and compressible two-phase flows. PhD Thesis , Cardiff University.
Li, X. et al., 2019. Structure constrained controller design for power plants and EV aggregator in frequency regulation considering time delays. Energy Procedia 158 , pp.2966-2971. (10.1016/j.egypro.2019.01.961)
Li, Y. et al., 2019. Review of building energy performance certification schemes towards future improvement. Renewable and Sustainable Energy Reviews 113 109244. (10.1016/j.rser.2019.109244)
Lin, X. et al. 2019. The elastic properties of composites reinforced by a transversely isotropic random fibre-network. Composite Structures 208 , pp.33-44. (10.1016/j.compstruct.2018.09.097)
Liu, C. et al. 2019. A cyber-physical machine tools platform using OPC UA and MTConnect. Journal of Manufacturing Systems 51 , pp.61-74. (10.1016/j.jmsy.2019.04.006)
Liu, G. et al., 2019. Distributed human 3D pose estimation and action recognition.. Presented at: ROBIO 2019- International Conference on Robotics and Biomimetics Dali, Yunnan, China 6-8 December 2019. 2019 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE. , pp.2316-2321. (10.1109/ROBIO49542.2019.8961741)
Liu, H. et al., 2019. Long-term creep deformations in colloidal calcium–silicate–hydrate gels by accelerated aging simulations. Journal of Colloid and Interface Science 542 , pp.339-346. (10.1016/j.jcis.2019.02.022)
Liu, H. et al., 2019. Visual SLAM based on dynamic object removal. Presented at: IEEE Robio 2019 Dali, China 6-8 December 2019. 2019 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE. , pp.596-601. (10.1109/ROBIO49542.2019.8961397)
Liu, J. et al. 2019. Magnetic characterisation of grain size and precipitate distribution by major and minor BH loop measurements. Journal of Magnetism and Magnetic Materials 481 , pp.55-67. (10.1016/j.jmmm.2019.02.088)
Liu, W. et al. 2019. Start-up strategy for modular multilevel converters with modified nearest level modulation method. Presented at: 8th Renewable Power Generation Conference (RPG 2019) Shanghai, China 24-25 October 2019. 8th Renewable Power Generation Conference (RPG 2019). IET. (10.1049/cp.2019.0473)
Liu, W. et al. 2019. Modeling and frequency analysis of a dual H-bridge current flow controller in meshed HVDC systems. Presented at: EPE'19 ECCE Europe, 21st European Conference on Power Electronics and Applications Genova, Italy 3-5 September 2019. 2019 21st European Conference on Power Electronics and Applications (EPE '19 ECCE Europe). IEEE. , pp.1-9. (10.23919/EPE.2019.8915121)
Liu, W. et al. 2019. Level-shift modulation and control of a dual H-bridge current flow controller in meshed HVDC systems. Presented at: 11th Energy Conversion Congress and Exposition (ECCE) Baltimore, MD, USA 29 September - 3 October 2019. 2019 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE. , pp.62-66. (10.1109/ECCE.2019.8912857)
Liu, X. 2019. Optimum design of composite structures using lamination parameters. PhD Thesis , Cardiff University.
Liu, X. , Featherston, C. A. and Kennedy, D. 2019. Two-level layup optimization of composite laminate using lamination parameters. Composite Structures 211 , pp.337-350. (10.1016/j.compstruct.2018.12.054)
Liu, X. , Yan, Z. and Wu, J. 2019. Optimal coordinated operation of a multi-energy community considering interactions between energy storage and conversion devices. Applied Energy 248 , pp.256-273. (10.1016/j.apenergy.2019.04.106)
Lloyd, C. , O'Doherty, T. and Mason-Jones, A. 2019. Development of a wave-current numerical model using Stokes 2nd Order Theory. International Marine Energy Journal 2 (1)
Long, C. , Zhou, Y. and Wu, J. 2019. A game theoretic approach for peer to peer energy trading. Energy Procedia 159 , pp.454-459. (10.1016/j.egypro.2018.12.075)
Lorenz, C. et al. 2019. Input feature selection and optimization for ANN models predicting daylight in buildings. Presented at: 26th International Workshop on Intelligent Computing in Engineering Leuven, Belgium 30 June - 3 July 2019. , pp.-.
Lorenz, C. et al. 2019. Artificial neural networks for parametric daylight design. Architectural Science Review 63 (2), pp.210-221. (10.1080/00038628.2019.1700901)
Lorenz, C. et al. 2019. Machine learning in design exploration: An investigation of the sensitivities of ANN-based daylight predictions. Presented at: "Hello, Culture": Computer-Aided Architectural Design Futures 2019 Daejeon, South Korea 26-28 June 2019.
Lu, M. et al., 2019. Molecular interaction balanced one- and two-dimensional hybrid nanoarchitectures for high-performance supercapacitors. Physical Chemistry Chemical Physics 21 (40), pp.22283-22292. (10.1039/C9CP04579A)
Lu, Y. et al., 2019. Influence of vitamin D status and mechanical loading on the morphometric and mechanical properties of the mouse tibia. Journal of Medical and Biological Engineering 39 (4), pp.523-531. (10.1007/s40846-018-0433-7)
Lu, Y. et al., 2019. Effect of parathyroid hormone on the structural, densitometric and failure behaviours of mouse tibia in the spatiotemporal space. PLoS ONE 14 (7) e0219575. (10.1371/journal.pone.0219575)
Lu, Y. et al., 2019. The anisotropic elastic behavior of the widely-used triply-periodic minimal surface based scaffolds. Journal of the Mechanical Behavior of Biomedical Materials 99 , pp.56-65. (10.1016/j.jmbbm.2019.07.012)
Lu, Y. et al., 2019. The anisotropic elastic behavior of the widely-used triply-periodic minimal surface-based scaffolds. Presented at: CMBBE 2019 - 16th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering New York, USA 14-16 August, 2019. Elsevier. (10.1016/j.jmbbm.2019.07.012)
Lu, Y. et al., 2019. Standards for smart manufacturing: A review. Presented at: 2019 IEEE 15th International Conference on Automation Science and Engineering (CASE) University of British Columbia, Vancouver, BC, Canada 22-26 August 2019. Proceedings 2019 IEEE 15th International Conference on Automation Science and Engineering (CASE). IEEE. , pp.-. (10.1109/COASE.2019.8842989)
Lugg-Widger, P. and Haddad, A. 2019. Analysis of gaseous by-products of CF3I and CF3I-CO2 after high voltage arcing using a GCMS. Molecules 24 (8) 1599. (10.3390/molecules24081599)
Luke, J. et al., 2019. Twist and degrade – impact of molecular structure on the photostability of non-fullerene acceptors and their photovoltaic blends. Advanced Energy Materials 9 (15) 1803755. (10.1002/aenm.201803755)
Luo, Q. et al. 2019. Experimental investigation on the heat dissipation performance of flared-fin heat sinks for concentration photovoltaic modules. Applied Thermal Engineering 157 113666. (10.1016/j.applthermaleng.2019.04.076)
Luo, Y. et al., 2019. Simultaneous monocular visual odometry and depth reconstruction with scale recovery. Presented at: IEEE Robio 2019 Dali, China 6-8 December 2019. 2019 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE. , pp.682-687. (10.1109/ROBIO49542.2019.8961701)
Luo, Y. 2019. The application of vibration characteristics to damage modelling and identification in plate structures. PhD Thesis , Cardiff University.
Lv, C. et al., 2019. Model predictive control based robust scheduling of community integrated energy system with operational flexibility. Applied Energy 243 , pp.250-265. (10.1016/j.apenergy.2019.03.205)
Lynch, K. et al., 2019. Development of a laboratory technique for obtaining soil water retention curves under external loading in conjunction with high capacity tensiometers. Géotechnique 69 (4), pp.320-328. (10.1680/jgeot.17.P.176)
Lyu, J. et al. 2019. Life cycle assessment and life cycle costing of sanitary ware manufacturing: A case study in China. Journal of Cleaner Production 238 117938. (10.1016/j.jclepro.2019.117938)
Ma, S. et al., 2019. Energy-cyber-physical system enabled management for energy-intensive manufacturing industries. Journal of Cleaner Production 226 , pp.892-903. (10.1016/j.jclepro.2019.04.134)
Maddalena, R. 2019. Effect of silica particle size on the formation of calcium silicate hydrate using thermal analysis. Thermochimica Acta 672 , pp.142-149. (10.1016/j.tca.2018.09.003)
Maddalena, R. and Gardner, D. 2019. The healing touch. Construction and Civil Engineering Magazine (167)
Maddalena, R. et al. 2019. Direct synthesis of a solid calcium-silicate-hydrate (C-S-H). Construction and Building Materials 223 , pp.554-565. (10.1016/j.conbuildmat.2019.06.024)
Maddalena, R. , Taha, H. and Gardner, D. 2019. Enhanced self-healing using conventional supplementary cementitious materials. Presented at: 39th Cement and Concrete Science Conference 2019 Bath, England 9-10 September 2019. 39th Cement and Concrete Science Conference 2019. University of Bath. , pp.43-46.
Malik, S. et al., 2019. An in-vitro animal bone model study to predict spiral fracture strength of long bones in the young infant. Journal of Clinical Orthopaedics and Trauma 10 (4), pp.744-749. (10.1016/j.jcot.2018.10.001)
Malyshev, D. et al. 2019. Model of microwave effects on bacterial spores. Journal of Applied Physics 125 (12) 124701. (10.1063/1.5085442)
Mandal, S. et al. 2019. Chemical mechanical polishing of nanocrystalline diamond. In: Yang, N. ed. Novel Aspects of Diamond: From Growth to Applications. Vol. 121, Topics in Applied Physics Chem: Springer. , pp.53-89. (10.1007/978-3-030-12469-4_3)
Mandal, S. et al. 2019. Thick, adherent diamond films on AlN with low thermal barrier resistance. ACS Applied Materials and Interfaces 11 (43), pp.40826-40834. (10.1021/acsami.9b13869)
Markov, P. et al. 2019. Building a cell-specific cytoskeletal finite element model of scleral fibroblasts. Presented at: 25th Congress of the European Society of Biomechanics (ESB 2019) Vienna, Austria 7-10 July 2019. , pp.-.
Markov, P. et al. 2019. Effects of mechanical load on cytoskeletal protein arrangement in scleral fibroblasts. Presented at: The Association for Research in Vision and Ophthalmology Annual Meeting Vancouver, BC, Canada 28 April -- 2 May 2019.
Martinez Zavala, H. et al. 2019. Experimental study on heat transfer enhancement during condensation using microstructured surfaces. Presented at: International Conference on Applied Energy 2019 Västerås, Sweden 12-15 Aug 2019.
Massie, L. et al., 2019. An actuator surface model to simulate vertical axis turbines. Energies 12 (24) 4741. (10.3390/en12244741)
Mathias, T. , Albano, M. and Robson, S. 2019. High voltage insulator monitoring using infrared camera and FPGA. Presented at: 2019 54th International Universities Power Engineering Conference (UPEC) Bucharest, Romania 3-6 September 2019. 2019 54th International Universities Power Engineering Conference (UPEC). IEEE. (10.1109/UPEC.2019.8893637)
Md Radzi, Y. et al. 2019. EP-1744 Enhancing the accuracy in VMAT dose verification by the use of EPID-based commercial software. Radiotherapy and Oncology 133 (S1), pp.S940-S491. (10.1016/S0167-8140(19)32164-4)
Md Radzi, Y. et al. 2019. EP-1748 Adaptive solution for an improved treatment verification using Dosimetry Check system. Radiotherapy and Oncology 133 (S1), pp.S942-S943. (10.1016/S0167-8140(19)32168-1)
Mermigkas, A. C. , Clark, D. and Manu Haddad, A. 2019. Investigation of high altitude/tropospheric correction factors for electric aircraft applications. Presented at: 21st International Symposium on High Voltage Engineering Frankfurt, Germany 11-15 March 2019. Proceedings of the 21st International Symposium on High Voltage Engineering. Vol. 2.Lecture Notes in Electrical Engineering Springer Science Business Media. , pp.308-315. (10.1007/978-3-030-31676-1_30)
Michas, M. et al. 2019. Maximum power extraction from a hydrokinetic energy conversion system. IET Renewable Power Generation 13 (9), pp.1411-1419. (10.1049/iet-rpg.2018.5642)
Michelarakis, M. et al. 2019. Electrical detection of creeping discharges over insulator surfaces in atmospheric gases under AC voltage application. Energies 12 (15) 2970. (10.3390/en12152970)
Middleton, C. A. et al., 2019. Detecting and monitoring cracks in aerospace materials using post-processing of TSA and AE data. Metals 9 (7), pp.748. (10.3390/met9070748)
Mitchard, D. et al. 2019. Optical emission spectra of high current and high voltage generated arcs representing lightning. Applied Physics Letters 114 (16) 164103. (10.1063/1.5092875)
Mithan, H. T. , Hales, T. C. and Cleall, P. J. 2019. Supervised classification of landforms in Arctic mountains. Permafrost and Periglacial Processes 30 (3), pp.131-145. (10.1002/ppp.2015)
Mohammed, A. , Harris, I. and Dukyil, A. 2019. A trasilient decision making tool for vendor selection: A hybrid-MCDM algorithm. Management Decision 57 (2), pp.372-395. (10.1108/MD-04-2018-0478)
Mohammed, A. et al. 2019. A hybrid MCDM-fuzzy multi-objective programming approach for a G-Resilient supply chain network design. Computers and Industrial Engineering 127 , pp.297-312. (10.1016/j.cie.2018.09.052)
Mohammed Ameen, R. F. and Mourshed, M. 2019. Urban sustainability assessment framework development: The ranking and weighting of Iraqi indicators using analytic hierarchy process (AHP). Sustainable Cities and Society 44 , pp.356-366. (10.1016/j.scs.2018.10.020)
Mohsin, M. 2019. Creation of local comprehensive sustainability framework for developing cities: A case study in the Iraqi capital Baghdad. PhD Thesis , Cardiff University.
Mohtarami, E. et al., 2019. Fracture mechanism simulation of inhomogeneous anisotropic rocks by extended finite element method. Theoretical and Applied Fracture Mechanics 104 102359. (10.1016/j.tafmec.2019.102359)
Mokhti, Z. A. et al., 2019. The nonlinear drain-source capacitance effect on continuous-mode class-B/J power amplifiers. IEEE Transactions on Microwave Theory and Techniques 67 (7), pp.2741-2747. (10.1109/TMTT.2019.2918309)
Morini, L. , Eyzat, Y. and Gei, M. 2019. Negative refraction in quasicrystalline multilayered metamaterials. Journal of the Mechanics and Physics of Solids 124 , pp.282-298. (10.1016/j.jmps.2018.10.016)
Moses, A. et al. 2019. Electrical Steels Volume 1: Fundamentals and basic concepts. UK: The Institution of Engineering and Technology.
Moses, A. et al. 2019. Electrical Steels Volume 2: Performance and applications. UK: The Institution of Engineering and Technology.
Muaaz-Us-Salam, S. , Cleall, P. J. and Harbottle, M. J. 2019. The case for examining fluid flow in municipal solid waste at the pore-scale - A review. Waste Management and Research 37 (4), pp.315-332. (10.1177/0734242X19828120)
Mudaheranwa, E. , Udokah, Y. and Cipcigan, L. 2019. Rwanda’s energy profile and potential renewable energy resources mapping toward sustainable development goals. Presented at: 2019 IEEE PES & IAS PowerAfrica Conference 20 - 23 August 2019. , pp.-.
Muhawenimana, V. et al. 2019. Spanwise cylinder wake hydrodynamics and fish behavior. Water Resources Research 55 (11), pp.8569-8582. (10.1029/2018WR024217)
Muhawenimana, V. 2019. Ecohydraulics of instream flow alterations. PhD Thesis , Cardiff University.
Najdenovska, E. et al., 2019. Comparison of MRI-based automated segmentation methods and functional neurosurgery targeting with direct visualization of the Ventro-intermediate thalamic nucleus at 7T. Scientific Reports 9 1119. (10.1038/s41598-018-37825-8)
Nan, X. 2019. Impact analysis of domestic building energy demand and electric vehicles charging on low voltage distribution networks. PhD Thesis , Cardiff University.
Nardi, C. D. et al., 2019. Self- healing lime-based mortars using biological mechanisms and microvascular networks. Presented at: 5th Historic Mortars Conference Pamplona, Spain 19-21 June 2019. , pp.-.
Nasar, A. et al., 2019. Eulerian weakly compressible smoothed particle hydrodynamics (SPH) with the immersed boundary method for thin slender bodies. Journal of Fluids and Structures 84 , pp.263-282. (10.1016/j.jfluidstructs.2018.11.005)
Neofytou, A. et al. 2019. Level set topology optimization for design dependent hydrostatic loading using the reproducing kernel particle method. Presented at: International Design Engineering Technical and Computers and Information in Engineering Conference Anaheim, California, USA 18-21 August 2019. INternational Design Engineering Techincal Conference & Computers and Information in Engineering. Vol. 2B.ASME. (10.1115/DETC2019-97803)
Nikora, V. I. et al., 2019. Friction factor decomposition for rough-wall flows: theoretical background and application to open-channel flows. Journal of Fluid Mechanics 872 , pp.626-664. (10.1017/jfm.2019.344)
Niu, H. et al. 2019. Voronoi-visibility roadmap-based path planning algorithm for unmanned surface vehicles. Journal of Navigation 72 (4), pp.850-874. (10.1017/S0373463318001005)
Noori-kalkhoran, O. et al., 2019. Simulation of hydrogen distribution and effect of Engineering Safety Features (ESFs) on its mitigation in a WWER-1000 containment. Nuclear Science and Techniques 30 (6) 97. (10.1007/s41365-019-0624-0)
Novelli, V. et al. 2019. Seismic vulnerability assessment of non-engineered masonry buildings in Malawi. Presented at: 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering Crete, Greece 24-25 June 2019. Published in: Papadrakakis, M. and Fragiadakis, M. eds. , pp.5375-5385. (10.7712/120119.7311.18869)
Novelli, V. I. and D'Ayala, D. 2019. Use of the knowledge-based system LOG-IDEAH to assess failure modes of masonry buildings, damaged by L'Aquila Earthquake in 2009. Frontiers in Built Environment 5 , pp.-. 95. (10.3389/fbuil.2019.00095)
Obaid, Z. A. et al., 2019. Frequency control of future power systems: reviewing and evaluating challenges and new control methods. Journal of Modern Power Systems and Clean Energy 7 (1), pp.9-25. (10.1007/s40565-018-0441-1)
Okolo, C. K. and Meydan, T. 2019. Finite element method and experimental investigation for hairline crack detection and characterization. International Journal of Applied Electromagnetics and Mechanics 59 (4), pp.1203-1211. (10.3233/JAE-171047)
Oliyide, R. 2019. Load management of electric vehicles and heat pumps in emerging electricity system. PhD Thesis , Cardiff University.
Oniosun, S. 2019. Phytoremediation of LNAPLs and residual oils in the vadose zone and capillary fringe. PhD Thesis , Cardiff University.
Oniosun, S. et al. 2019. Plant growth, root distribution and non-aqueous phase liquid phytoremediation at the pore-scale. Journal of Environmental Management 249 109378. (10.1016/j.jenvman.2019.109378)
Ordone-Sanchez, S. et al., 2019. Numerical models to predict the performance of tidal stream turbines working under off-design conditions. Ocean Engineering 181 , pp.198-211. (10.1016/j.oceaneng.2019.04.027)
Ordonez-Sanchez, S. et al., 2019. Analysis of a horizontal-axis tidal turbine performance in the presence of regular and irregular waves using two control strategies. Energies 12 (3), pp.-. 367. (10.3390/en12030367)
O'Regan, P. 2019. Process capability management for selective laser melting. PhD Thesis , Cardiff University.
Ouro, P. et al., 2019. Scalability of an Eulerian-Lagrangian large-eddy simulation solver with hybrid MPI/OpenMP parallelisation. Computers and Fluids 179 , pp.123-136. (10.1016/j.compfluid.2018.10.013)
Ouro, P. et al., 2019. Prediction of the wake behind a horizontal axis tidal turbine using a LES-ALM. In: Ferrer, E. and Montlaur, A. eds. Prediction of the Wake Behind a Horizontal Axis Tidal Turbine Using a LES-ALM. Springer Tracts in Mechanical Engineering , pp.25-35. (10.1007/978-3-030-11887-7_3)
Ouro, P. , Muhawenimana, V. and Wilson, C. A. 2019. Asymmetric wake of a horizontal cylinder in close proximity to a solid boundary for Reynolds numbers in the subcritical turbulence regime. Physical Review Fluids 4 104604. (10.1103/PhysRevFluids.4.104604)
Ouro, P. , Ramírez, L. and Harrold, M. 2019. Analysis of array spacing on tidal stream turbine farm performance using Large-Eddy Simulation. Journal of Fluids and Structures 91 102732. (10.1016/j.jfluidstructs.2019.102732)
Ouro, P. et al. 2019. Three-dimensionality of the wake recovery behind a vertical axis turbine. Renewable Energy 133 , pp.1066-1077. (10.1016/j.renene.2018.10.111)
Ouro, P. and Stoesser, T. 2019. Impact of environmental turbulence on the performance and loadings of a tidal stream turbine. Flow, Turbulence and Combustion 102 (3), pp.613-639. (10.1007/s10494-018-9975-6)
Packianather, M. S. , Al-Musawi, A. K. and Anayi, F. 2019. Bee for mining (B4M) - a novel rule discovery method using the Bees algorithm with quality-weight and coverage-weight. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233 (14), pp.5101-5112. (10.1177/0954406219833719)
Packianather, M. S. et al. 2019. Development of soft computing tools and IoT for improving the performance assessment of analysers in a clinical laboratory. Presented at: 14th Annual Conference System of Systems Engineering (SoSE) Anchorage, USA 19-22 May 2019. 2019 14th Annual Conference System of Systems Engineering (SoSE). IEEE. , pp.158. (10.1109/SYSOSE.2019.8753830)
Pan, Z. et al. 2019. Quasi-dynamic interactions and security control of integrated electricity and heating systems in normal operations. CSEE Journal of Power and Energy Systems 5 (1), pp.-. (10.17775/CSEEJPES.2018.00240)
Parker, N. et al. 2019. A novel VHF heating system to aid selective laser melting. Presented at: 2019 IEEE MTT-S International Microwave Symposium, IMS 2019 Boston, USA 2 -7 June 2019. , pp.-.
Parkinson, C. 2019. Advanced automated PET image segmentation in radiation therapy. PhD Thesis , Cardiff University.
Parkinson, C. et al. 2019. Machine-learned target volume delineation of 18F-FDG PET images after one cycle of induction chemotherapy. Physica Medica, European Journal of Medical Physics 61 , pp.85-93. (10.1016/j.ejmp.2019.04.020)
Partridge, S. 2019. Electromagnetic properties of semiconducting metal oxides under external stimulation. PhD Thesis , Cardiff University.
Pathirage, M. et al., 2019. The ONIX model: a parameter-free multiscale framework for the prediction of self-desiccation in concrete. Cement and Concrete Composites 103 , pp.36-48. (10.1016/j.cemconcomp.2019.04.011)
Patton, A. et al. 2019. Observed controls on the seasonal variability of urban groundwater thermal regimes. Presented at: European Geosciences Union Annual General Meeting Vienna, Austria 7-12 Apr 2019. , pp.-.
Paudel, A. et al., 2019. Peer-to-peer energy trading in a prosumer based community microgrid: a game-theoretic model. IEEE Transactions on Industrial Electronics 66 (8), pp.6087-6097. (10.1109/TIE.2018.2874578)
Peirce, S. C. and Carolan-Rees, G. 2019. ReCell® spray-on skin system for treating skin loss, scarring and depigmentation after burn injury: a NICE medical technology guidance. Applied Health Economics and Health Policy 17 (2), pp.131-141. (10.1007/s40258-018-00457-0)
Penchev, P. et al., 2019. System-level integration tools for laser-based powder bed fusion enabled process chains. Journal of Manufacturing Systems 50 , pp.87-102. (10.1016/j.jmsy.2018.12.003)
Peng, S. B. et al., 2019. Carbon monoxide diffusion and ventilation in underground garage. Applied Ecology and Environmental Research 17 (4)(10.15666/aeer/1704_90659081)
Peng, S. et al., 2019. Numerical analysis of particle erosion in the rectifying plate system during shale gas extraction. Energy Science and Engineering 7 (5), pp.1838-1851. (10.1002/ese3.395)
Peng, X. et al., 2019. Random forest based optimal feature selection for partial discharge pattern recognition in HV cables. IEEE Transactions on Power Delivery 34 (4), pp.1715-1724. (10.1109/TPWRD.2019.2918316)
Peng, X. et al., 2019. A convolutional neural network based deep learning methodology for recognition of partial discharge patterns from high- voltage cables. IEEE Transactions on Power Delivery 34 (4), pp.1460-1469. (10.1109/TPWRD.2019.2906086)
Perepelkin, N. et al. 2019. Estimation of the elastic modulus and the work of adhesion of soft materials using the extended Borodich-Galanov (BG) method and depth sensing indentation. Mechanics of Materials 129 , pp.198-213. (10.1016/j.mechmat.2018.11.017)
Perepelkin, N. V. et al. 2019. Depth-sensing indentation as a micro- and nanomechanical approach to characterisation of mechanical properties of soft, biological, and biomimetic materials. Nanomaterials 10 (1) 15. (10.3390/nano10010015)
Perepelkin, N. V. et al. 2019. Experimental testing of self-healing ability of soft polymer materials. Meccanica 54 (13), pp.1959-1970. (10.1007/s11012-019-00965-w)
Petri, I. et al. 2019. Edge-cloud orchestration: Strategies for service placement and enactment. Presented at: 2019 IEEE International Conference on Cloud Engineering (IC2E) Prague, Czech Republic 24-27 June 2019. Cloud Engineering (IC2E), IEEE International Conference on. IEEE. , pp.67-75. (10.1109/IC2E.2019.00020)
Petri, I. , Yama, A. and Rezgui, Y. 2019. Agent-based appliance scheduling for energy management in industry 4.0. Presented at: GECON 2019: International Conference on the Economics of Grids, Clouds, Systems, and Services Leeds, UK 17-19 Sep 2019. Published in: Djemame, K. et al., Economics of Grids, Clouds, Systems, and Services. Vol. 11819.Lecture Notes in Computer Science Cham, Switzerland: Springer Verlag. , pp.199-207. (10.1007/978-3-030-36027-6_17)
Piacibello, A. et al., 2019. Optimisation of a Doherty power amplifier based on dual-input characterisation. Presented at: IEEE COMCAS 2019, International Conference on Microwave, Communication, Antennas & Electronic Systems Tel Aviv, Israel 4-6 November 2019. Published in: Piacibello, A. et al., 2019 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems (COMCAS). IEEE(10.1109/COMCAS44984.2019.8958432)
Piazzese, C. et al. 2019. EP-1926 Radiomics in rectal cancer: prognostic significance of 3D features extracted from diagnostic MRI. Radiotherapy and Oncology 133 (S1), pp.S1048. (10.1016/S0167-8140(19)32346-1)
Piazzese, C. et al. 2019. Radiomics in rectal cancer: prognostic significance of 3D features extracted from diagnostic MRI [Abstract]. Radiotherapy and Oncology 133 , pp.S1048-S1048. (10.1016/S0167-8140(19)32346-1)
Piazzese, C. et al. 2019. Discovery of stable and prognostic CT-based radiomic features independent of contrast administration and dimensionality in oesophageal cancer. PLoS ONE 14 (11) e0225550. (10.1371/journal.pone.0225550)
Piazzese, C. et al. 2019. PO-0964 Stability and prognostic significance of CT radiomic features from oesophageal cancer patients. Radiotherapy and Oncology 133 (S1), pp.S524-S525. (10.1016/S0167-8140(19)31384-2)
Picelli Sanches, R. , Neofytou, A. and Kim, H. A. 2019. Topology optimization for design-dependent hydrostatic pressure loading via the level-set method. Structural and Multidisciplinary Optimization 60 (4), pp.1313-1326. (10.1007/s00158-019-02339-y)
Pinzan, D. et al. 2019. Insulation solutions for HVAC to HVDC conversion of a high voltage transmission overhead line: the L7 tower case study. Presented at: 21st International Symposium on High Voltage Engineering Frankfurt, Germany 11-15 March 2019. Proceedings of the 21st International Symposium on High Voltage Engineering. Vol. 2.Lecture Notes in Electrical Engineering Springer Science Business Media. , pp.1359-1371. (10.1007/978-3-030-31680-8_130)
Pont, S. et al., 2019. Evidence for strong and weak phenyl-C61-butyric acid methyl ester photodimer populations in organic solar cells. Chemistry of Materials 31 (16), pp.6076-6083. (10.1021/acs.chemmater.8b05194)
Pugh, D. et al. 2019. Influence of steam addition and elevated ambient conditions on NOx reduction in a staged premixed swirling NH3/H2 flame. Proceedings of the Combustion Institute 37 (4), pp.5401-5409. (10.1016/j.proci.2018.07.091)
Pullin, H. et al. 2019. Atmospheric carbon capture performance of legacy iron and steel waste. Environmental Science and Technology 53 (16), pp.9502-9511. (10.1021/acs.est.9b01265)
Qadrdan, M. et al. 2019. Electricity systems capacity expansion under cooling water availability constraints. IET Energy Systems Integration 1 (1), pp.23-33. (10.1049/iet-esi.2018.0024)
Qadrdan, M. et al. 2019. Gas and electricity supply implications of decarbonising heat sector in GB. Energy 169 , pp.50-60. (10.1016/j.energy.2018.11.066)
Qi, S. et al., 2019. Influence of grain size distribution of inclusions on the mechanical behaviors of track-bed materials. Géotechnique (10.1680/jgeot.18.p.047)
Qin, J. 2019. Advanced data analytics for additive manufacturing energy consumption modelling, prediction, and management under Industry 4.0. PhD Thesis , Cardiff University.
Qin, J. et al. 2019. Deep learning-driven particle swarm optimisation for additive manufacturing energy optimisation. Journal of Cleaner Production , pp.118702. (10.1016/j.jclepro.2019.118702)
Qiu, C. et al. 2019. Influence of laser processing strategy and remelting on surface structure and porosity development during selective laser melting of a metallic material. Metallurgical and Materials Transactions A 50 (9), pp.4423-4434. (10.1007/s11661-019-05348-0)
Quaglia, R. et al. 2019. A 1.8-3.2 GHz Doherty Power Amplifier in quasi-MMIC Technology. IEEE Microwave and Wireless Components Letters 29 (5), pp.345-347. (10.1109/LMWC.2019.2904883)
Quaglia, R. and Lees, J. 2019. Simplified analysis of the effect of load variation in common Doherty power amplifier architectures. Presented at: 2019 IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR) Orlando, FL, USA 20-23 Jan 2019. IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR). IEEE
Quaglia, R. , Powell, J. and Collins, D. 2019. Load modulated balanced amplifier. In: Webster, J. G. ed. The Wiley Encyclopedia of Electrical and Electronics Engineering. Vol 3.. Wiley-Blackwell
Quetzeri-Santiago, M. A. et al., 2019. Role of the dynamic contact angle on splashing. Physical Review Letters 122 (22) 228001. (10.1103/PhysRevLett.122.228001)
Rahimi-Aghdam, S. et al., 2019. Century-long expansion of hydrating cement counteracting concrete shrinkage due to humidity drop from selfdesiccation or external drying. Materials and Structures 52 (1) 11. (10.1617/s11527-018-1307-8)
Rajamony, R. and Ming, W. 2019. Improved hold-up time for WBG-based single-phase converters. Presented at: 2019 21st European Conference on Power Electronics and Applications (EPE '19 ECCE Europe) Genova, Italy 3-5 September 2019. 2019 21st European Conference on Power Electronics and Applications (EPE '19 ECCE Europe). IEEE. , pp.P.1. (10.23919/EPE.2019.8914818)
Ramírez, L. et al., 2019. A higher-order Chimera method based on Moving Least Squares. In: Ferrer, E. and Montlaur, A. eds. Recent Advances in CFD for Wind and Tidal Offshore Turbines. Springer. , pp.73-82. (10.1007/978-3-030-11887-7_7)
Ransley, E. et al., 2019. A blind comparative study of focused wave interactions with a fixed FPSO-like structure (CCP-WSI Blind Test Series 1). International Journal of Offshore and Polar Engineering 29 (2), pp.113-127. (10.17736/ijope.2019.jc748)
Rappel, H. et al., 2019. Identifying elastoplastic parameters with Bayes' theorem considering output error, input error and model uncertainty. Probabilistic Engineering Mechanics 55 , pp.28-41. (10.1016/j.probengmech.2018.08.004)
Rawat, A. , Baille, W. and Tripathy, S. 2019. Swelling behavior of compacted bentonite-sand mixture during water infiltration. Engineering Geology 257 105141. (10.1016/j.enggeo.2019.05.018)
Reeve, D. et al., 2019. A new perspective on meso-scale shoreline dynamics through data-driven analysis. Geomorphology 341 , pp.169-191. (10.1016/j.geomorph.2019.04.033)
Ren, G. 2019. Knowledge management in PPP decision making concerning value for money assessment. PhD Thesis , Cardiff University.
Ren, G. , Ding, R. and Li, H. 2019. Building an ontological knowledgebase for bridge maintenance. Advances in Engineering Software 130 , pp.24-40. (10.1016/j.advengsoft.2019.02.001)
Ren, G. et al. 2019. Developing an information exchange scheme concerning value for money assessment in Public-Private Partnerships. Journal of Building Engineering 25 100828. (10.1016/j.jobe.2019.100828)
Rendón, O. R. et al., 2019. A framework linking ecosystem services and human well-being: Saltmarsh as a case study. People and Nature 1 (4), pp.486-496. (10.1002/pan3.10050)
Reynolds, J. 2019. Real-time and semantic energy management across buildings in a district configuration. PhD Thesis , Cardiff University.
Reynolds, J. et al. 2019. Operational supply and demand optimisation of a multi-vector district energy system using artificial neural networks and a genetic algorithm. Applied Energy 235 , pp.699-713. (10.1016/j.apenergy.2018.11.001)
Reynolds, M. et al. 2019. Assessing the effects of water flow rate on parasite transmission amongst a social host. Hydrobiologia 830 (1), pp.201-212. (10.1007/s10750-018-3863-x)
Roberts, M. , Weightman, A. and Sapsford, D. J. 2019. Chapter 8. Potential application of direct and indirect iron bioreduction in resource recovery from iron oxide-bearing wastes. In: Macaskie, L. , Sapsford, D. and Mayes, W. eds. Resource Recovery from Wastes: Towards a Circular Economy. , pp.192-212. (10.1039/9781788016353-00192)
Robinson, M. 2019. Developing novel materials to enhance motorcyclist safety. PhD Thesis , Cardiff University.
Robinson, M. et al. 2019. Mechanical characterisation of additively manufactured elastomeric structures for variable strain rate applications. Additive Manufacturing 27 , pp.-. (10.1016/j.addma.2019.03.022)
Robson, S. and Haddad, A. M. 2019. On the use of LoRa for power line communication. Presented at: 2019 54th International Universities Power Engineering Conference (UPEC) Bucharest, Romania 3-6 September 2019. 2019 54th International Universities Power Engineering Conference (UPEC). IEEE. , pp.1. (10.1109/UPEC.2019.8893538)
Robson, S. , Tan, G. and Haddad, A. 2019. Low-cost monitoring of synchrophasors using frequency modulation. Energies 12 (4) 611. (10.3390/en12040611)
Rojo Zazueta, E. et al. 2019. An initial characterisation of a tidal stream turbine on a drive train test rig. Presented at: 13th European Wave and Tidal Energy Conference Naples, Italy 1-4 September 2019. Proceedings of the 13th European Wave and Tidal Energy Conference. Naples, Italy: , pp.1-8.
Rotunno, T. et al., 2019. Curved masonry pillars reinforced with anchored CFRP sheets: an experimental analysis. Composites Part B: Engineering 174 107008. (10.1016/j.compositesb.2019.107008)
Runge, S. et al. 2019. Technology readiness of a vertical-axis hydro-kinetic turbine. Journal of Power and Energy Engineering 6 (8), pp.63. (10.4236/jpee.2018.68004)
Runyon, J. et al. 2019. Characterization of ALM swirl burner surface roughness and its effect on flame stability using high-speed diagnostics. Presented at: ASME Turbo Expo 2019 Phoenix, Arizona, USA 17-21 June 2019. ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition: Volume 4A: Combustion, Fuels, and Emissions. , pp.GT2019-90215-V04AT04A008. (10.1115/GT2019-90215)
Sadasivam, S. et al. 2019. Baseline geochemical study of the Aberpergwm mining site in the South Wales Coalfield. Journal of Geochemical Exploration 202 , pp.100-112. (10.1016/j.gexplo.2019.03.006)
Saeed, N. M. and Kwan, A. S. K. 2019. Shape morphing and adjustment of pantographic morphing aerofoil section structure. Smart structures and systems 24 (2), pp.193-207. (10.12989/sss.2019.24.2.193)
Sainz, L. et al., 2019. Admittance study of grid-connected VSCs for harmonic oscillatory instabilities. IET Generation, Transmission and Distribution 13 (18), pp.4049-4060. (10.1049/iet-gtd.2019.0321)
Sainz, L. et al., 2019. Assessment of subsynchronous oscillations in AC grid-connected VSC systems with type-4 wind turbines. IET Renewable Power Generation 13 (16), pp.3088-3096. (10.1049/iet-rpg.2019.0291)
Salunkhe, S. et al., 2019. Validation of hydrokinetic turbulent wake predictions and analysis of wake recovery mechanism. Journal of Marine Science and Engineering 7 (10) 362. (10.3390/jmse7100362)
Samiran, N. A. et al., 2019. Experimental and numerical studies on the premixed syngas swirl flames in a model combustor. International Journal of Hydrogen Energy 44 (44), pp.24126-24139. (10.1016/j.ijhydene.2019.07.158)
Samukham, S. et al., 2019. Dynamic instability analysis of variable angle tow composite plate with delamination around a cutout. Mechanics of Advanced Materials and Structures 26 (1), pp.62-70. (10.1080/15376494.2018.1534166)
Sarda, J. , Pandya, K. and Shah, M. 2019. Emerging heuristic optimization algorithms for expansion planning and flexibility optimization in sustainable electrical power systems. Presented at: International Conference on Power, Control and Communication Infrastructure Institute of Infrastructure Technology Research and Management, Ahmedabad, India 4-5 July 2019. Published in: Mehta, A. , Rawat, A. and Chauhan, P. eds. Advances in Control Systems and its Infrastructure. Proceedings of ICPCCI 2019. Vol. 604.Singapore: Springer Science Business Media. , pp.191-200. (10.1007/978-981-15-0226-2_15)
Savage, R. J. et al., 2019. Methods for assessing acid and metalliferous drainage mitigation and carbon sequestration in mine waste: a case study from Kevitsa mine, Finland. Presented at: 13th International Conference on Mine Closure Perth, Australia 3-5 September 2019.
Sawle, L. , Freeman, J. and Marsden, J. 2019. A pilot RCT investigating the effects of targeted compression on athletes with pelvic / groin pain. Journal of Sport Rehabilitation 28 (2), pp.133-143. (10.1123/jsr.2017-0097)
Scholz, M. et al., 2019. Highlights of the novel dewaterability estimation test (DET) device. Environmental Technology 41 (20)(10.1080/09593330.2019.1575916)
Seward, W. G. et al. 2019. Modelling of static wireless electric vehicle charging and its impact on a typical GB distribution network. Presented at: 54th International Universities Power Engineering Conference (UPEC) Bucharest, Romania 3-6 Sep 2019. 2019 54th International Universities Power Engineering Conference (UPEC). IEEE. (10.1109/UPEC.2019.8893603)
Sexton, D. 2019. Coal agglomeration in blast furnace injection coals. PhD Thesis , Cardiff University.
Shafiekhani, M. and Badri, A. 2019. A risk-based gaming framework for VPP bidding strategy in a joint energy and regulation market. Iranian Journal of Science and Technology Transactions of Electrical Engineering 43 (3), pp.545-558. (10.1007/s40998-019-00179-6)
Shafiekhani, M. et al. 2019. Strategic bidding of virtual power plant in energy markets: a bi-level multi-objective approach. International Journal of Electrical Power & Energy Systems 113 , pp.208-219. (10.1016/j.ijepes.2019.05.023)
Shallal, B. 2019. Domestic energy use and suppressed energy demand in hot-arid climate. PhD Thesis , Cardiff University.
Sheeran, L. et al. 2019. Identifying non-specific low back pain clinical subgroups from sitting and standing repositioning posture tasks using a novel Cardiff Dempster–Shafer Theory Classifier. Clinical Biomechanics 70 , pp.237-244. (10.1016/j.clinbiomech.2019.10.004)
Shen, Z. et al., 2019. Risk evaluation of biochars produced from Cd-contaminated rice straw and optimization of its production for Cd removal. Chemosphere 233 , pp.149-156. (10.1016/j.chemosphere.2019.05.238)
Shen, Z. et al., 2019. Effect of production temperature on lead removal mechanisms by rice straw biochars. Science of the Total Environment 655 , pp.751-758. (10.1016/j.scitotenv.2018.11.282)
Shen, Z. et al., 2019. Solidification/stabilization for soil remediation: An old technology with new vitality. Environmental Science and Technology 53 (20), pp.11615−11617. (10.1021/acs.est.9b04990)
Shen, Z. et al., 2019. Temporal effect of MgO reactivity on the stabilization of lead contaminated soil. Environment International 131 104990. (10.1016/j.envint.2019.104990)
Sheng, W. 2019. Evaluation of “Open Grid” protection strategy for a DC Network. Presented at: 15th IET International Conference on AC and DC Power Transmission (ACDC 2019) 05-07 February 2019. 15th IET International Conference on AC and DC Power Transmission (ACDC 2019). IET(10.1049/cp.2019.0097)
Shi, Y. et al. 2019. Influence of hydraulic regimes and Cl2/NH3-N mass ratios on the bacterial structure and composition in an experimental flow cell chloraminated drinking water system. Environmental Science: Water Research & Technology 5 (5), pp.977-992. (10.1039/C9EW00015A)
Shi, Z. et al., 2019. External validation of radiation-induced dyspnea models on esophageal cancer radiotherapy patients. Frontiers in Oncology 9 1411. (10.3389/fonc.2019.01411)
Sibanda, P. et al. 2019. State of the art in surface finish of metal additive manufactured parts. Presented at: 17th International Conference on Manufacturing Research (ICMR 2019) Belfast, Northern Ireland 10-12 September 2019. Published in: Lin, Y. and Price, M. eds. Advances in Manufacturing Technology XXXIII: Proceedings of the 17th International Conference on Manufacturing Research, incorporating the 34th National Conference on Manufacturing Research. Vol. 9.Advances in Dransdisciplinary Engineering Netherlands: IOS Press BV. , pp.221 - 225. (10.3233/ATDE190039)
Sikdar, S. et al., 2019. Nondestructive analysis of debonds in a composite structure under variable temperature conditions. Sensors 19 (16), pp.3454. (10.3390/s19163454)
Simonovic, J. 2019. Bone cell population models and their advantages: simplicity, purposefulness and exactness. Presented at: JRC Summer School on Non-Animal Approaches in Science – Challenges and Future Directions JRC Ispra, Italy 21-24 May 2019.
Simonovic, J. 2019. Mathematical commentary of external excitation in bone cell population models. Presented at: EMBL/EMBO Symposium- Mechanical Forces in Development Heidelberg, Germany 2-6 July 2019.
Simonovic, J. 2019. Multi-parametric analysis of bone turnover. Presented at: The International Workshop on Recent Trends in Applied Mathematics (RTM’19), jointly with the International Conference on Digital Image and Signal Processing, St Hugh's College, University of Oxford Oxford, UK 19-20 April 2019. , pp.-.
Simonovic, J. and Hedrih, K. 2019. Amplitude resonant jumps in transient regimes of complex structure oscillation [Oral Presentation]. Presented at: ICoNSoM 2019: International Conference on Nonlinear Solid Mechanics Rome, Italy 16-19 June 2019. ICoNSoM 2019. Abstract Book. International Conference on Nonlinear Solid Mechanics. , pp.-.
Simonovic, J. , Holt, C. and Mason, D. 2019. Semantic insight and behaviour of the computational bone cell population models. Presented at: 25th Congress of the European Society of Biomechanics (ESB 2019) Vienna, Austria 7-10 July 2019. , pp.-.
Simonovic, J. and Woolley, T. 2019. Deterministic and stochastic parameter analysis of the bone cell population model. Presented at: 8th International Conference on Computational Bioengineering (ICCB2019) Belgrade, Serbia 4-6 September 2019.
Simonovic, J. and Woolley, T. 2019. Equation of osteocyte activity in the bone cell population model. Presented at: ACTC Advances in Cell and Tissue Cultures, Cardiff University School of Biosciences Cardiff, UK 4-5th June 2019.
Simonovic, J. and Woolley, T. 2019. Study of bone cell population models of s-system type. Presented at: Organ-on-a-Chip Technologies Network – Learning and Collaborative Event on 8 April 2019 at QMUL London, UK 8-9 April 2019.
Slama, M. E. A. et al. 2019. Dry-band discharges dynamic at the surface of SiR textured insulator during AC inclined plane test. Presented at: 21st International Symposium on High Voltage Engineering Frankfurt, Germany 11-15 March 2019. Proceedings of the 21st International Symposium on High Voltage Engineering. Vol. 2.Lecture Notes in Electrical Engineering Springer Science Business Media. , pp.504-517. (10.1007/978-3-030-31680-8_51)
Sonder, H. B. , Cipcigan, L. and Ugalde Loo, C. 2019. Using electric vehicles and demand side response to unlock distribution network flexibility. Presented at: IEEE PES PowerTech Milano 2019 Milan, Italy 23-27 June 2019. Proceedings 2019 IEEE Milan PowerTech. IEEE(10.1109/PTC.2019.8810521)
Song, J. et al., 2019. Effect of heat treatment on microstructure and mechanical behaviours of 18Ni-300 maraging steel manufactured by selective laser melting. Optics and Laser Technology 120 105725. (10.1016/j.optlastec.2019.105725)
Sparkes, V. et al. 2019. Comparison of gait, functional activities and patient-reported outcome measures in patients with knee osteoarthritis and healthy adults using 3D motion analysis and activity monitoring: An exploratory case-control analysis. Orthopedic Research and Reviews 11 , pp.129-140. (10.2147/ORR.S199107)
Speller, E. M. et al., 2019. Toward improved environmental stability of polymer: Fullerene and polymer: Nonfullerene organic solar cells: a common energetic origin of light- and oxygen-induced degradation. ACS Energy Letters 4 (4), pp.846-852. (10.1021/acsenergylett.9b00109)
Speller, E. M. et al., 2019. From fullerene acceptors to non-fullerene acceptors: prospects and challenges in the stability of organic solar cells. Journal of Materials Chemistry A 7 (41), pp.23361-23377. (10.1039/C9TA05235F)
Spencer, C. and Diambra, A. 2019. Laboratory measurement of strength of weak clay samples. Presented at: XVII European Conference on Soil Mechanics and Geotechnical Engineering Reykjavik, Iceland 1-6 Sept 2019. The Icelandic Geotechnical Society(10.32075/17ECSMGE-2019-0829)
Spencer, C. and Sass, H. 2019. Development of self-healing biocement. Presented at: 8th Congress of European Microbiologists (FEMS2019) Glasgow 07 - 11 Jul 2019. , pp.-.
Spencer, C. and Sass, H. 2019. Use of carrier materials to immobilise and supply cementation medium for microbially mediated self-healing in biocement. Presented at: 4th International Conference “Innovative Materials, Structures and Technologies” (IMST 2019) Riga, Latvia 25 - 27 September 2019. IOP Conference Series: Materials Science and Engineering. Vol. 660.Vol. 012067. IOP Publishing(10.1088/1757-899X/660/1/012067)
Srinivas, V. L. et al. 2019. A normalized adaptive filter for enhanced optimal operation of grid interfaced PV system. Presented at: 2nd IEEE International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES 2018) Delhi, India 22-24 October 2018. 2018 2nd IEEE International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES). IEEE. , pp.522-527. (10.1109/ICPEICES.2018.8897346)
Srinivas, V. L. , Singh, B. and Mishra, S. 2019. Adaptive generalized predictive control scheme for single phase GPV system. Presented at: 4th International Conference on Universal Village (UV 2018) Boston, MA, United States 21-24 October 2018. 2018 4th International Conference on Universal Village (UV). IEEE. , pp.1-6. (10.1109/UV.2018.8642148)
Srinivas, V. L. , Singh, B. and Mishra, S. 2019. Fault ride-through strategy for two-stage grid-connected photovoltaic system enabling load compensation capabilities. IEEE Transactions on Industrial Electronics 66 (11), pp.8913-8924. (10.1109/TIE.2019.2899546)
Srinivas, V. L. , Singh, B. and Mishra, S. 2019. Predictive optimal switching vector controller based microgrid enabling switching frequency constraint. Presented at: 2018 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES) Chennai, India 18-21 December 2018. 2018 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES). IEEE. , pp.1-6. (10.1109/PEDES.2018.8707899)
Sshrama, K. et al., 2019. On the use of acoustic emission and digital image correlation for welded joints damage characterization. Journal of Applied and Computational Mechanics 5 (2), pp.381-389. (10.22055/JACM.2018.25941.1301)
Su, H. et al., 2019. Novel voltage-to-power sensitivity estimation for phasor measurement unit-unobservable distribution networks based on network equivalent. Applied Energy 250 , pp.302-312. (10.1016/j.apenergy.2019.05.018)
Su, H. et al., 2019. Optimal placement of phasor measurement unit in distribution networks considering the changes in topology. Applied Energy 250 , pp.313-322. (10.1016/j.apenergy.2019.05.054)
Su, T. and Li, H. 2019. BIM-based machine learning engine for smart real estate appraisal. Presented at: 2nd International Conference on Sustainable Smart Manufacturing Manchester, United Kingdom 9-11 April, 2019.
Sukor, A. S. A. et al., 2019. A hybrid approach of knowledge-driven and data-driven reasoning for activity recognition in smart homes. Journal of Intelligent and Fuzzy Systems 36 (5), pp.4177-4188. (10.3233/JIFS-169976)
Suliman, B. , Featherston, C. A. and Kennedy, D. 2019. A hybrid method for modelling damage in composites and its effect on natural frequency. Computers and Structures 213 , pp.40-50. (10.1016/j.compstruc.2018.12.003)
Sun, W. et al., 2019. Environmental impact assessment of wastewater discharge with multi-pollutants from iron and steel industry. Journal of Environmental Management 245 , pp.210-215. (10.1016/j.jenvman.2019.05.081)
Sun, W. et al., 2019. Chlorine corrosion of blast furnace gas pipelines: analysis from thermal perspective. Journal of Mining and Metallurgy, Section B : Metallurgy 55 (2), pp.197-208. (10.2298/JMMB181016028S)
Sun, W. et al., 2019. Assessment of multi-air emissions: case of particulate matter (dust), SO2, NOx and CO2 from iron and steel industry of China. Journal of Cleaner Production 232 , pp.350-358. (10.1016/j.jclepro.2019.05.400)
Sun, X. , Zhang, Y. and Kennedy, D. 2019. On stochastic dynamic analysis and assessment of bistable structures. Nonlinear Dynamics 95 (4), pp.3205-3218. (10.1007/s11071-018-04750-4)
Syed Anera, S. M. H. et al. 2019. High-efficiency broadband PA design based on continuous Class-F mode with compression. Presented at: 2019 IEEE MTT-S International Microwave Symposium, IMS 2019 Boston, USA 2 -7 June 2019. MTT-S International Microwave Symposium (IMS). IEEE. , pp.698-701. (10.1109/MWSYM.2019.8700767)
Syed Anera, S. M. H. 2019. High-efficiency and broadband PA design considering the impact of device knee voltage. PhD Thesis , Cardiff University.
Tadza, M. Y. M. et al., 2019. Bentonite and marconite for electrical grounding applications from geotechnical engineering perspective. AIP Publishing. (10.1063/1.5118086)
Tadza, M. Y. M. , Noraini, A. A. and Tripathy, S. 2019. Ceramic with potential application of Kuantan nesosilicate (East Coast of Malaysia) in building construction: Mineralogy and physicochemical composition. Presented at: 5Th International Conference On Green Design And Manufacture (IconGDM 2019) Jawa Barat, Indonesia 29–30 April 2019. AIP Conference Proceedings (2019);. Vol. 2129.Vol. 1. AIP Publishing(10.1063/1.5118081)
Tafrishi, S. et al. 2019. A fluid-actuated driving mechanism for rolling robots. Presented at: 2019 IEEE 4th International Conference on Advanced Robotics and Mechatronics (ICARM) Toyonoka, Japan 03-05 July 2019. 2019 IEEE 4th International Conference on Advanced Robotics and Mechatronics (ICARM). IEEE. (10.1109/ICARM.2019.8833646)
Tafrishi, S. A. et al. 2019. Inverse dynamics-based motion control of a fluid-actuated rolling robot. Nelineinaya Dinamika 15 (4)(10.20537/nd190420)
Tafrishi, S. A. et al. 2019. Design, modeling, and motion analysis of a novel fluid actuated spherical rolling robot. Journal of Mechanisms And Robotics-Transactions of the ASME 11 (4) 041010. (10.1115/1.4043689)
Tao, X. et al., 2019. 3D patterning/manipulating microparticles and yeast cells using ZnO/Si thin film surface acoustic waves. Sensors and Actuators B: Chemical 299 126991. (10.1016/j.snb.2019.126991)
Theodoridou, M. and Torok, A. 2019. In situ investigation of stone heritage sites for conservation purposes: a case study of the Székesfehérvár Ruin Garden in Hungary. Progress in Earth and Planetary Science 6 15. (10.1186/s40645-019-0268-z)
Thomas, L. 2019. A smart contract oriented whole system regulatory model for electricity networks. Working paper.
Thomas, L. et al. 2019. A general form of smart contract for decentralised energy systems management. Nature Energy 4 , pp.140-149. (10.1038/s41560-018-0317-7)
Thomas, L. J. , Canet, A. and Abeysinghe Herath Mudiyanselage, S. M. 2019. Use of prediction based meter reputation factors in power systems. Presented at: PES Innovative Smart Grid Technologies Europe (ISGT-Europe) Bucharest, Romania 29 Sep - 2 Oct 2019. PES Innovative Smart Grid Technologies Europe (ISGT-Europe). IEEE. (10.1109/ISGTEurope.2019.8905750)
Togni, R. , Cimarelli, A. and De Angelis, E. 2019. Resolved and subgrid dynamics of Rayleigh-Bénard convection. Journal of Fluid Mechanics 867 , pp.906-933. (10.1017/jfm.2019.119)
Torres, B. et al., 2019. A full-scale timbrel cross vault subjected to vertical cyclical displacements in one of its supports. Engineering Structures 183 , pp.791-804. (10.1016/j.engstruct.2019.01.054)
Torres, B. et al., 2019. Experimental investigation of a full-scale timbrel masonry cross vault subjected to vertical settlement. Construction and Building Materials 221 , pp.421-432. (10.1016/j.conbuildmat.2019.06.015)
Townsend, S. et al. 2019. Topology optimization of vibrational piezoelectric energy harvesters for structural health monitoring applications. Journal of Intelligent Material Systems and Structures 30 (18-19), pp.2894-2907. (10.1177/1045389X19873392)
Townsend, S. and Kim, H. A. 2019. A level set topology optimization method for the buckling of shell structures. Structural and Multidisciplinary Optimization 60 (5), pp.1783-1800. (10.1007/s00158-019-02374-9)
Tsang, Y. et al., 2019. Assessment of contour variability in target volumes and organs at risk in lung cancer radiotherapy. Technical Innovations and Patient Support in Radiation Oncology 10 , pp.8-12. (10.1016/j.tipsro.2019.05.001)
Udoakah, Y. , Mudaheranwa, E. and Cipcigan, L. 2019. Dynamic modeling of energy consumption pattern of a typical Nigerian average urban and rural household for microgrid PV design. Presented at: IEEE PES Innovative Smart Grid Technologies Europe Bucharest, Romania 29 Sep - 2 Oct 2019. PES Innovative Smart Grid Technologies Europe (ISGT-Europe). IEEE(10.1109/ISGTEurope.2019.8905464)
Udoakah, Y. , Mudaheranwa, E. and Cipcigan, L. 2019. Municipal street lighting systems energy cost and carbon footprint estimation in Uyo, Nigeria. Presented at: 2019 IEEE PES/IAS PowerAfrica Conference 20-23 August 2019.
Udoakah, Y. , Mudaheranwa, E. and Cipcigan, L. 2019. Municipal street lighting systems energy cost and carbon footprint estimation in Uyo, Nigeria. Presented at: 2019 IEEE PES/IAS PowerAfrica Abuja, Nigeria 20-23 August 2019. 2019 IEEE PES/IAS PowerAfrica. , pp.476. (10.1109/PowerAfrica.2019.8928661)
Valera Medina, A. et al. 2019. Premixed ammonia/hydrogen swirl combustion under rich fuel conditions for gas turbines operation. International Journal of Hydrogen Energy 44 (16), pp.8615-8626. (10.1016/j.ijhydene.2019.02.041)
Valera Medina, A. et al. 2019. Reduced chemical kinetics for CDF studies of ammonia-hydrogen blends in gas turbine swirl combustors. Presented at: Ammonia for Fueling Future Energy Workshop Lisbon, Portugal 13-14 April 2019.
Veeramani, S. et al. 2019. Multi-head path planning of SwarmItFIX Agents: a Markov decision process approach. Presented at: IFToMM World Congress on Mechanism and Machine Science Krakow, Poland 15-18 July 2019. Advances in Mechanism and Machine Science Proceedings of the 15th IFToMM World Congress on Mechanism and Machine Science. Vol. 73.Springer International Publishing. , pp.2237-2247. (10.1007/978-3-030-20131-9_221)
Velenturf, A. P. M. et al., 2019. A new perspective on a global circular economy. In: Resource Recovery from Wastes: Towards a Circular Economy. Green Chemistry Series , pp.1-22. (10.1039/9781788016353-00001)
Vidal, E. et al., 2019. Online multilayered motion planning with dynamic constraints for autonomous underwater vehicles. Presented at: IEEE International Conference on Robotics and Automation (ICRA) Montreal, QC, Canada 20-24 May 2019. Proceedings of the IEEE International Conference on Robotics and Automation (ICRA). IEEE. , pp.8936-8942. (10.1109/ICRA.2019.8794009)
Vidal, E. et al., 2019. Two-dimensional frontier-based viewpoint generation for exploring and mapping underwater environments. Sensors 19 (6) 1460. (10.3390/s19061460)
Videla, J. et al., 2019. h- and p-adaptivity driven by recovery and residual-based error estimators for PHT-splines applied to time-harmonic acoustics. Computers and Mathematics with Applications 77 (9), pp.2369-2395. (10.1016/j.camwa.2018.12.026)
Vilamala, M. R. et al., 2019. A pilot study on detecting violence in videos fusing proxy models. Presented at: 22nd International Conference on Information Fusion Ottawa, Canada 2-5 July 2019.
Volpini, V. , Bardella, L. and Gei, M. 2019. A note on the solution of the electro-elastic boundary-value problem for rank-two laminates at finite strains. Meccanica 54 (13), pp.1971-1982. (10.1007/s11012-019-00974-9)
Wang, G. 2019. Baseband linearization schemes for high efficiency power amplifiers. PhD Thesis , Cardiff University.
Wang, H. and Chen, R. 2019. Estimating static and dynamic stresses in geosynthetic-reinforced pile-supported track-bed under train moving loads. ASCE Journal of Geotechnical and Geoenvironmental Engineering 145 (7) 04019029. (10.1061/(ASCE)GT.1943-5606.0002056)
Wang, H. et al. 2019. Investigation on geogrid reinforcement and pile efficacy in geosynthetic-reinforced pile-supported track-bed. Geotextiles and Geomembranes 47 (6), pp.755-766. 103489. (10.1016/j.geotexmem.2019.103489)
Wang, H. et al. 2019. Soil-geogrid interaction at various influencing factors by pullout tests with applications of FBG sensors. Journal of Materials in Civil Engineering 31 (1) 04018342. (10.1061/(ASCE)MT.1943-5533.0002537)
Wang, H. et al. 2019. Effect of grain size distribution of sandy soil on shearing behaviors at soil-structure interface. Journal of Materials in Civil Engineering 31 (10), pp.-. 04019238. (10.1061/(ASCE)MT.1943-5533.0002880)
Wang, J. et al., 2019. Catalytic fast co-pyrolysis of bamboo sawdust and waste plastics for enhanced aromatic hydrocarbons production using synthesized CeO2/γ-Al2O3 and HZSM-5. Energy Conversion and Management 196 , pp.759-767. (10.1016/j.enconman.2019.06.009)
Wang, J. , Shi, Y. and Zhou, Y. 2019. Intelligent demand response for industrial energy management considering thermostatically controlled loads and EVs. IEEE Transactions on Industrial Informatics 15 (6), pp.3432-3442. (10.1109/TII.2018.2875866)
Wang, K. et al., 2019. Data and knowledge jointly driving model for design concept generation. Presented at: International Design Engineering Technical and Computers and Information in Engineering Conference Anaheim, California, USA 18-21 August 2019. , pp.-.
Wang, S. et al. 2019. Coordination of MMCs with hybrid DC circuit breakers for HVDC grid protection. IEEE Transactions on Power Delivery 34 (1), pp.11-22. (10.1109/TPWRD.2018.2828705)
Wang, S. , Ming, W. and Liang, J. 2019. Interlinked solid-state MVDC circuit breaker with current regulation capability. Presented at: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society Lisbon, Portugal 14-17 October 2019. IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society. IEEE. , pp.5668-5673. (10.1109/IECON.2019.8927420)
Wang, X. et al., 2019. Promoted dispersion and uniformity of active species on Fe-Ce-Al catalysts for efficient NO abatement. RSC Advances 9 (61), pp.35751-35759. (10.1039/C9RA06875A)
Wang, X. et al., 2019. Precursor and dispersion effects of active species on the activity of Mn-Ce-Ti catalysts for NO abatement. Korean Journal of Chemical Engineering 36 (12), pp.1991-1999. (10.1007/s11814-019-0410-z)
Wang, X. , Zhu, H. and Kennedy, D. 2019. Viscoelastic properties of crosslinked actin filament networks. Presented at: 12th EBSA Biophysics Congress, 10th ICBP-IUPAP Biophysics Congress Madrid, Spain 20-24 July 2019.
Wang, Y. et al., 2019. A new reaching law for anti-disturbance sliding-mode control of PMSM speed regulation system. IEEE Transactions on Power Electronics 35 (4), pp.4117-4126. (10.1109/TPEL.2019.2933613)
Wang, Y. et al., 2019. New reaching law control for permanent magnet synchronous motor with extended disturbance observer. IEEE Access 7 , pp.186296-186307. (10.1109/ACCESS.2019.2956846)
Wang, Y. et al., 2019. Demand side management of plug-in electric vehicles and coordinated unit commitment: A novel parallel competitive swarm optimization method. Energy Conversion and Management 196 , pp.935-949. (10.1016/j.enconman.2019.06.012)
Wang, Y. et al., 2019. Emissions of nitrogen-based fuel combustion in swirl burner. Energy Procedia 158 , pp.1706-1711. (10.1016/j.egypro.2019.01.397)
Waton, A. , Forrest, S. and Whatling, G. 2019. Optoelectronic measurement of wrist movements in various casts and orthoses used in scaphoid fractures. Journal of Hand Surgery (European Volume) 44 (6), pp.607-613. (10.1177/1753193419842519)
Watt, F. E. et al., 2019. Towards prevention of post-traumatic osteoarthritis: report from an international expert working group on considerations for the design and conduct of interventional studies following acute knee injury. Osteoarthritis and Cartilage 27 (1), pp.23-33. (10.1016/j.joca.2018.08.001)
Wei, W. et al., 2019. A robust assessment model of the solar electrical-thermal energy comprehensive accommodation capability in a district integrated energy system. Energies 12 (7) 1363. (10.3390/en12071363)
Welikala, S. et al., 2019. Implementation of a robust real-time non-intrusive load monitoring solution. Applied Energy 238 , pp.1519-1529. (10.1016/j.apenergy.2019.01.167)
Wells, L. et al., 2019. Photon phase shift at the few-photon level and optical switching by a quantum dot in a microcavity. Physical Review Applied 11 (6), pp.-. 061001. (10.1103/PhysRevApplied.11.061001)
Weng, K. and Mourshed, M. 2019. RNN-based forecasting of indoor temperature in a naturally ventilated residential building. Presented at: Building Simulation 2019 Rome, Italy 2-4 September 2019. Proceedings of the 16th IBPSA Conference. IBPSA. , pp.3103-3108. (10.26868/25222708.2019.211294)
Wheeler, P. et al., 2019. OC-0183 Multi-institutional evaluation of a Pareto navigation guided automated planning solution. Radiotherapy and Oncology 133 (S1), pp.S92. (10.1016/S0167-8140(19)30603-6)
Wheeler, P. A. et al., 2019. Utilisation of Pareto navigation techniques to calibrate a fully automated radiotherapy treatment planning solution. Physics and Imaging in Radiation Oncology 10 , pp.41-48. (10.1016/j.phro.2019.04.005)
Wheeler, P. A. et al., 2019. Evaluating the application of Pareto navigation guided automated radiotherapy treatment planning to prostate cancer. Radiotherapy and Oncology 141 , pp.220-226. (10.1016/j.radonc.2019.08.001)
Whybra, P. et al. 2019. A novel normalisation technique for voxel size dependent radiomic features in oesophageal cancer [Abstract]. Radiotherapy and Oncology 133 , pp.S523-S524. (10.1016/S0167-8140(19)31383-0)
Whybra, P. et al. 2019. PO-0963 A novel normalisation technique for voxel size dependent radiomic features in oesophageal cancer. Radiotherapy and Oncology 133 (S1), pp.S523-S524. (10.1016/S0167-8140(19)31383-0)
Whybra, P. et al. 2019. Assessing radiomic feature robustness to interpolation in 18F-FDG PET imaging. Scientific Reports 9 (1) 9649. (10.1038/s41598-019-46030-0)
Williams, C. and George, C. 2019. Connect and conquer: collectivized behavior of mitochondria and bacteria. Frontiers in Physiology , pp.-. (10.3389/fphys.2019.00340)
Williams, C. F. et al. 2019. Bioluminescence of Vibrio fischeri: bacteria respond quickly and sensitively to pulsed microwave electric (but not magnetic) fields. Journal of Biomedical Optics 24 (5) 051412. (10.1117/1.JBO.24.5.051412)
Wood, L. J. et al., 2019. Developing a protocol and experimental setup for using a humanoid robot to assist children with autism to develop visual perspective taking skills. Paladyn 10 (1), pp.167-179. (10.1515/pjbr-2019-0013)
Wu, H. , Jin, F. and Du, Y. 2019. Influence of wet-dry cycles on vertical cutoff walls made of reactive magnesia-slag-bentonite-soil mixtures. Journal of Zhejiang University Science A 20 (12), pp.948-960. (10.1631/jzus.A1900300)
Wu, H. et al., 2019. Engineering properties of vertical cutoff walls consisting of reactive magnesia-activated slag and bentonite: Workability, strength, and hydraulic conductivity. Journal of Materials in Civil Engineering 31 (11) 04019263. (10.1061/(ASCE)MT.1943-5533.0002908)
Wu, Z. et al., 2019. Polymer-based device fabrication and applications using direct laser writing technology. Polymers 11 (3) 553. (10.3390/polym11030553)
Wyatt, H. et al. 2019. Nonlinear scaling effects in the stiffness of soft cellular structures. Royal Society Open Science 6 (1) 181361.
Xie, Z. et al. 2019. Three-dimensional numerical study of solitary waves interacting with a horizontal plate. Presented at: 29th International Ocean and Polar Engineering Conference Honolulu; US 16-21 June 2019. Proceedings of the Twenty-ninth (2019) International Ocean and Polar Engineering Conference. Vol. 3.US: International Society of Offshore and Polar Engineers (ISOPE). , pp.2733-2738.
Xu, J. et al., 2019. A thyristor based DC fault current limiter with inductor inserting-bypassing capability. IEEE Journal of Emerging and Selected Topics in Power Electronics 7 (3), pp.1748-1757. (10.1109/JESTPE.2019.2914404)
Xu, X. et al. 2019. Coordinative control of CHP generation and battery for frequency response. Presented at: 2019 IEEE Power & Energy Society General Meeting (PESGM) Atlanta, GA 4-8 August 2019. , pp.1. (10.1109/PESGM40551.2019.8973982)
Xu, X. et al. 2019. Unlocking the flexibility of CHP in district heating systems to provide frequency response. Presented at: 13th IEEE PowerTech 2019 Milano, Italy 23-27 June 2019. IEEE Milan PowerTech. IEEE. (10.1109/PTC.2019.8810576)
Xue, J. , Ahmadian, R. and Falconer, R. 2019. Optimising the operation of tidal range schemes. Energies 12 (15) 2870. (10.3390/en12152870)
Yahui, Z. , Yuyin, L. and Kennedy, D. 2019. An uncertain computational model for random vibration analysis of subsea pipelines subjected to spatially varying ground motions. Engineering Structures 183 , pp.550-561. (10.1016/j.engstruct.2019.01.031)
Yan, H. et al., 2019. An analytical model for chemical diffusion in layered contaminated sediment systems with bioreactive caps. International Journal for Numerical and Analytical Methods in Geomechanics 43 (15), pp.2471-2490. (10.1002/nag.2992)
Yan, S. et al., 2019. Numerical simulation of wave structure interaction using qalefoam. Presented at: 29th International Ocean and Polar Engineering Conference Honolulu; US 16-21 June 2019. Proceedings of the International Offshore and Polar Engineering Conference. US: International Society of Offshore and Polar Engineers (ISOPE). , pp.3089-3095.
Yan, S. et al., 2019. Comparative numerical study on focusing wave interaction with FPSO-like structure. Journal of Offshore and Polar Engineering (IJOPE) 29 (2), pp.149-157.
Yang, B. et al., 2019. Exploiting user experience from online customer reviews for product design. International Journal of Information Management 46 , pp.173-186. (10.1016/j.ijinfomgt.2018.12.006)
Yang, J. et al., 2019. Model I cohesive zone models of different rank coals. International Journal of Rock Mechanics and Mining Sciences 115 , pp.145-156. (10.1016/j.ijrmms.2019.01.001)
Yang, P. et al. 2019. A four-leg buck inverter for three-phase four-wire systems with the function of reducing DC-bus ripples. Presented at: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society Lisbon, Portugal 14-17 October 2019. IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society. IEEE. , pp.1508-1513. (10.1109/IECON.2019.8927264)
Yang, P. et al. 2019. A SiC-based neutral leg for the three-phase four-wire inverter. Presented at: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society Lisbon, Portugal 14-17 October 2019. IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society. IEEE. , pp.1555-1560. (10.1109/IECON.2019.8927531)
Yang, P. et al. 2019. Reduction of DC-link ripples for SiC-based three-phase four-wire inverters with unbalanced loads. Presented at: 11th Energy Conversion Congress and Exposition (ECCE 2019) Baltimore, MD, USA 29 September - 3 October 2019. 2019 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE. (10.1109/ECCE.2019.8912810)
Yao, H. et al., 2019. Low-cost measurement of industrial shock signals via deep learning calibration. Presented at: International Conference on Acoustics, Speech, and Signal Processing Brighton, UK 12-17 May 2019. ICASSP IEEE International Conference on Acoustics, Speech and Signal Processing. IEEE. , pp.2892-2896. (10.1109/ICASSP.2019.8682484)
Ye, L. et al., 2019. Hierarchical model predictive control strategy based on dynamic active power dispatch for wind power cluster integration. IEEE Transactions on Power Systems 34 (6), pp.4617-4629. (10.1109/TPWRS.2019.2914277)
Ye, L. et al., 2019. Study of assessment on capability of wind power accommodation in regional power grids. Renewable Energy 133 , pp.647-662. (10.1016/j.renene.2018.10.042)
Ye, L. et al., 2019. Combined Gaussian Mixture Model and cumulants for probabilistic power flow calculation of integrated wind power network. Computers and Electrical Engineering 74 , pp.117-129. (10.1016/j.compeleceng.2019.01.010)
Yesilbudak, M. , Sagliyan, O. and Colak, A. 2019. Monthly electrical energy consumption modeling using ant lion optimizer. Presented at: 8th International Conference on Renewable Energy Research and Applications (ICRERA) Brasov, Romania 3-6 Nov 2019. 2019 8th International Conference on Renewable Energy Research and Applications (ICRERA). IEEE. , pp.977-981. (10.1109/ICRERA47325.2019.8996557)
Yoo, C. et al., 2019. Determination of the thermoelectric properties of a skutterudite-based device at practical operating temperatures by impedance spectroscopy. Applied Energy 251 , pp.-. 113341. (10.1016/j.apenergy.2019.113341)
You, F. and Benedikt, J. 2019. An optimized-load-impedance calculation and mining method based on i-v curves: Using broadband class-e power amplifier as example. IEEE Transactions on Industrial Electronics 66 (7), pp.5254-5263. (10.1109/TIE.2018.2868020)
You, M. et al., 2019. Energy hub scheduling method with voltage stability considerations. Presented at: 2018 IEEE/CIC International Conference on Communications in China (ICCC Workshops) Beijing, China 16-18 August 2018. 2018 IEEE/CIC International Conference on Communications in China (ICCC Workshops). IEEE. , pp.196-200. (10.1109/ICCChinaW.2018.8674468)
Yu, G. et al., 2019. A novel understanding of the normalized fatigue delamination model for composite multidirectional laminates. Composite Structures 229 111395. (10.1016/j.compstruct.2019.111395)
Yu, P. 2019. Isogeometric analysis with local adaptivity based on a posteriori error estimation for elastodynamics. PhD Thesis , Cardiff University.
Zabek, D. and Morini, F. 2019. Solid state generators and energy harvesters for waste heat recovery and thermal energy harvesting. Thermal Science and Engineering Progress 9 , pp.235-247. (10.1016/j.tsep.2018.11.011)
Zabek, D. et al. 2019. Two-phase ferrofluid systems: surfactants and thermal properties of iron oxide nanofluids for condensation. Presented at: 14th Research & Development in Power Engineering (RDPE 2019) Warsaw, Poland 3-6 December 2019. Vol. 137.EDP Sciences. , pp.1-4. (10.1051/e3sconf/201913701015)
Zagorščak, R. et al. 2019. Underground coal gasification - A numerical approach to study the formation of syngas and its reactive transport in the surrounding strata. Fuel 253 , pp.349-360. (10.1016/j.fuel.2019.04.164)
Zagorscak, R. and Thomas, H. R. 2019. High-pressure CO2 excess sorption measurements on powdered and core samples of high-rank coals from different depths and locations of the South Wales Coalfield. Energy and Fuels 33 (7), pp.6515-6526. (10.1021/acs.energyfuels.9b00381)
Zagorscak, R. and Thomas, H. R. 2019. Dynamic transport and reaction behaviour of high-pressure gases in high-rank coal. Journal of Natural Gas Science and Engineering 71 102978. (10.1016/j.jngse.2019.102978)
Zhang, A. et al., 2019. Multi-objective stochastic planning for offshore micro integrated energy systems. Automation of Electric Power Systems 43 (7), pp.129-135. (10.7500/AEPS20180417002)
Zhang, A. et al., 2019. Optimal planning of integrated energy systems for offshore oil extraction and processing platforms. Energies 12 (4) 756. (10.3390/en12040756)
Zhang, F. , Lin, B. and Sun, J. 2019. Current reversals in a large tidal river. Estuarine, Coastal and Shelf Science 223 , pp.74-84. (10.1016/j.ecss.2019.04.017)
Zhang, J. et al., 2019. Nonlinear dynamics of shape memory alloys actuated bistable beams. Smart Materials and Structures 28 055009. (10.1088/1361-665X/ab0325)
Zhang, R. et al., 2019. Experimental studies on the effect of properties and micro-structure on the creep of concrete-filled steel tubes. Materials 12 (7) 1046. (10.3390/ma12071046)
Zhang, T. et al. 2019. Decentralized state estimation of combined heat and power systems using the asynchronous alternating direction method of multipliers. Applied Energy 248 , pp.600-603. (10.1016/j.apenergy.2019.04.071)
Zhang, Y. et al., 2019. Comparison of strategies for operational flexibility enhancement of combined heat and power plants. Presented at: 3rd IEEE Conference on Energy Internet and Energy System Integration (EI2 2019) Changsha, China 8-10 November 2019. 2019 IEEE 3rd Conference on Energy Internet and Energy System Integration (EI2). IEEE. , pp.149-152. (10.1109/EI247390.2019.9061874)
Zhang, Y. et al., 2019. Adsorption of methyl tert-butyl ether (MTBE) onto ZSM-5 zeolite: Fixed-bed column tests, breakthrough curve modelling and regeneration. Chemosphere 220 , pp.422-431. (10.1016/j.chemosphere.2018.12.170)
Zhao, J. et al. 2019. Congestion management method of low- voltage active distribution networks based on distribution locational marginal price. IEEE Access 7 , pp.32240-32255. (10.1109/ACCESS.2019.2903210)
Zhao, J. et al., 2019. An islanding partition method of active distribution networks based on chance-constrained programming. Applied Energy 242 , pp.78-91. (10.1016/j.apenergy.2019.03.118)
Zhao, K. , Kennedy, D. and Featherston, C. 2019. Exact strip postbuckling analysis of composite plates under compression and shear. Aeronautical Journal 123 (1263), pp.658-677. (10.1017/aer.2019.27)
Zhao, W. , Beach, T. H. and Rezgui, Y. 2019. Automated model construction for combined sewer overflow prediction based on efficient LASSO algorithm. IEEE Transactions on Systems Man and Cybernetics: Systems 49 (6), pp.1254-1269. (10.1109/TSMC.2017.2724440)
Zhao, Y. et al. 2019. Spatio-temporal Markov chain model for very-short-term wind power forecasting. Journal of Engineering 2019 (18), pp.5018-5022. (10.1049/joe.2018.9294)
Zhao, Z. et al., 2019. Optimal placement of PMUs and communication links for distributed state estimation in distribution networks. Applied Energy 256 113963. (10.1016/j.apenergy.2019.113963)
Zheng, S. et al., 2019. Erodibility of synthetic water repellent granular materials: adapting the ground to weather extremes. Science of the Total Environment 689 , pp.298-412. (10.1016/j.scitotenv.2019.06.328)
Zheng, X. Y. et al., 2019. Offshore steel fish farming facility integrated with multi vertical-axis wind turbines: A conceptual design and hydrodynamic analysis. International Journal of Innovative Technology and Exploring Engineering 8 (7C2), pp.133-139.
Zhou, T. et al., 2019. Capillary stress and structural relaxation in moist granular materials. Langmuir 35 (12), pp.4397-4402. (10.1021/acs.langmuir.8b03400)
Zhou, X. , Du, Z. and Kim, H. A. 2019. A level-set shape metamorphosis with mechanical constraints for geometrically graded microstructures. Structural and Multidisciplinary Optimization 60 (1), pp.1-16. (10.1007/s00158-019-02293-9)
Zhou, Y. et al. 2019. Decentralized control of industrial heating loads for providing multiple levels and types of primary frequency control service. Energy Procedia 158 , pp.3138-3143. (10.1016/j.egypro.2019.01.1015)
Zhou, Y. , Cheng, M. and Wu, J. 2019. Enhanced frequency response from industrial heating loads for electric power systems. IEEE Transactions on Industrial Informatics 15 (6), pp.3388-3399. (10.1109/TII.2018.2879907)
Zhu, J. et al., 2019. Electric vehicle charging load forecasting: A comparative study of deep learning approaches. Energies 12 (14) 2692. (10.3390/en12142692)
Zhu, Z. , Liu, C. and Xu, X. 2019. Visualisation of the digital twin data in manufacturing by using augmented reality. Procedia CIRP 81 , pp.898-903. (10.1016/j.procir.2019.03.223)

Cyhoeddiadau 2019

Yr Ysgol Peirianneg

Cysylltwch â ni

Cysylltu â ni

Dyfarniad Athena Swan