Yr Ysgol Peirianneg

Cyhoeddiadau

Archwiliwch ein cyhoeddiadau i gael rhagor o wybodaeth am ein hymchwil a gydnabyddir yn rhyngwladol sy’n cael effaith ar draws y byd.

Mae llawer o’n hymchwilwyr yn gwneud eu testun yn gwbl hygyrch er mwyn i bobl ei weld a’i rannu i gefnogi’r cyfnewid gwybodaeth a syniadau am ddim.

Borodich, F. M. and Jin, X. eds. 2022. Contact problems for soft, biological and bioinspired materials. Biologically-Inspired Systems Springer Cham. (10.1007/978-3-030-85175-0)
Abed, M. E. A. et al., 2022. Experimental investigation on dielectric/electric properties of aged polymeric insulator: correlation of permittivity and dielectric loss tangent with surface hydrophobicity. Electrical Engineering 104 , pp.1539-1552. (10.1007/s00202-021-01405-3)
Adams, R. et al. 2022. Finite element-based optimisation of an elastomeric honeycomb for impact mitigation in helmet liners. International Journal of Mechanical Sciences 214 106920. (10.1016/j.ijmecsci.2021.106920)
Adams, R. et al. 2022. Mechanical behaviour of additively manufactured elastomeric pre-buckled honeycombs under quasi-static and impact loading. Materials & Design 213 110368. (10.1016/j.matdes.2021.110368)
Agyekum, E. B. et al., 2022. Technical performance prediction and employment potential of solar PV systems in cold countries. Sustainability 14 (6) 3546. (10.3390/su14063546)
Ahmed, U. , Petri, I. and Rana, O. 2022. Edge-cloud resource federation for sustainable cities. Sustainable Cities and Society 82 103887. (10.1016/j.scs.2022.103887)
Ai, C. et al., 2022. Three-dimensional non-hydrostatic model for dam-break flows. Physics of Fluids 34 (2) 22105. (10.1063/5.0081094)
Ai, C. et al., 2022. An efficient 3D non-hydrostatic model for predicting nonlinear wave interactions with fixed floating structures. Ocean Engineering 248 110810. (10.1016/j.oceaneng.2022.110810)
Ai, C. et al., 2022. Vortex shedding and evolution induced by the interactions between a solitary wave and a submerged horizontal plate. Journal of Hydraulic Research 60 (2), pp.311-325. (10.1080/00221686.2021.2001594)
Al-Azzawi, A. S. M. , Kawashita, L. F. and Featherston, C. A. 2022. Predicting interlaminar damage behaviour of fibre-metal laminates containing adhesive joints under bending loads. Journal of Reinforced Plastics and Composites 41 (5-6), pp.167-186. (10.1177/07316844211051706)
Al-Moftah, A. M. S. H. , Marsh, R. and Steer, J. 2022. Thermogravimetric kinetic analysis of non-recyclable waste CO2 gasification with catalysts using coats–redfern method. ChemEngineering 6 (2) 22. (10.3390/chemengineering6020022)
Alamri, N. M. , Packianather, M. and Bigot, S. 2022. Deep learning: parameter optimization using proposed novel hybrid bees Bayesian convolutional neural network. Applied Artificial Intelligence (10.1080/08839514.2022.2031815)
Alghamdi, M. , Beach, T. and Rezgui, Y. 2022. Reviewing the effects of deploying Building Information Modelling (BIM) on the adoption of sustainable design in Gulf countries: a case study in Saudi Arabia. City, Territory and Architecture
Alghamdi, T. A. H. , Anayi, F. and Packianather, M. 2022. Optimal design of passive power filters using the MRFO algorithm and a practical harmonic analysis approach including uncertainties in distribution networks. Energies 15 (7) 2566. (10.3390/en15072566)
Alghamdi, T. A. H. and Anayi, F. J. 2022. Analysis of harmonic propagations in Albaha power network due to the implementation of an MVDC converter. Presented at: IEEE PES Innovative Smart Grid Technologies - Asia (ISGT Asia) Brisbane, Australia 5-8 Dec 2021. Proceedings of IEEE PES Innovative Smart Grid Technologies - Asia (ISGT Asia). IEEE(10.1109/ISGTAsia49270.2021.9715713)
Alghamdi, T. A. H. and Anayi, F. J. 2022. Modelling and control development of an MVDC converter implemented for Albaha power network. Presented at: 5th International Conference on Power and Energy Engineering Xiamen, China 2-4 Dec 2021. 2021 5th International Conference on Power and Energy Engineering (ICPEE). IEEE. , pp.66-72. (10.1109/ICPEE54380.2021.9662568)
Alkhathami, H. M. 2022. Reaction kinetics in biomass gasification (chemical engineering). PhD Thesis , Cardiff University.
Almudaihesh, F. et al. 2022. A comparison study of water diffusion in unidirectional and 2D woven carbon/epoxy composites. Polymer Composites 43 (1), pp.118-129. (10.1002/pc.26361)
Alnajideen, M. and Min, G. 2022. Hybrid photovoltaic-thermoelectric system using a novel spectral splitting solar concentrator. Energy Conversion and Management 251 114981. (10.1016/j.enconman.2021.114981)
Alqazzaz, S. et al., 2022. Combined features in region of interest for brain tumor segmentation. Journal of Digital Imaging (10.1007/s10278-022-00602-1)
Alrebei, O. F. et al., 2022. State of the art in separation processes for alternative working fluids in clean and efficient power generation. Separations 9 (1) 14. (10.3390/separations9010014)
Alsaegh, A. 2022. Fundamental characterisation of coherent structures for swirl combustors. PhD Thesis , Cardiff University.
Alshahrani, A. , Cui, T. and Kulasegaram, S. 2022. Influence of sand to aggregate ratio on the fresh and mechanical properties of self-compacting high-performance concrete. Presented at: The 7th World Congress on Civil, Structural, and Environmental Engineering (CSEE'22) 10-12 April 2022. Proceedings of the 7th World Congress on Civil, Structural, and Environmental Engineering (CSEE'22). ICSECT(10.11159/icsect22.171)
Altayef, E. et al. 2022. Detection and classification of lamination faults in A 15 kVA three-phase transformer core using SVM, KNN and DT algorithms. IEEE Access 10 , pp.50925-50932. (10.1109/ACCESS.2022.3174359)
Altayef, E. et al. 2022. On the effects of lamination artificial faults in A 15 kVA three-phase transformer core. IEEE Access 10 , pp.19348-19355. (10.1109/ACCESS.2022.3151367)
Alzahrani, A. et al. 2022. A proposed roadmap for delivering zero carbon fishery ports. Presented at: 8th International Conference on Energy and Environment Research (ICEER 2021) Rome, Italy 13-17 September 2021. Published in: Caetano Nidia, S. et al., Energy Reports: The 8th International Conference on Energy and Environment Research – “Developing the World in 2021 with Clean and Safe Energy”. Vol. 8 (3).Vol. 3. Elsevier. , pp.82-88. (10.1016/j.egyr.2022.01.083)
Amin, A. et al. 2022. Demand response in buildings: Unlocking energy flexibility through district-level electro-thermal simulation. Applied Energy 305 117836. (10.1016/j.apenergy.2021.117836)
An, N. , Zagorščak, R. and Thomas, H. R. 2022. Adsorption characteristics of rocks and soils, and their potential for mitigating the environmental impact of underground coal gasification technology: a review. Journal of Environmental Management 305 114390. (10.1016/j.jenvman.2021.114390)
An, N. , Zagorscak, R. and Thomas, H. R. 2022. Transport of heat, moisture, and gaseous chemicals in hydro-mechanically altered strata surrounding the underground coal gasification reactor. International Journal of Coal Geology 249 103879. (10.1016/j.coal.2021.103879)
Awosusi, A. A. et al., 2022. A roadmap toward achieving sustainable environment: evaluating the impact of technological innovation and globalization on load capacity factor. International Journal of Environmental Research and Public Health 19 (6) 3288. (10.3390/ijerph19063288)
Azad, E. M. et al. 2022. Load-pull data analysis of a GaN on SiC HEMT targeting multi bias Doherty design. Presented at: International Workshop on Integrated Nonlinear Microwave and Millimeterwave Circuits, INMMIC Cardiff, UK 7-8 April 2022. Proceedings of the 2022 International Workshop on Integrated Nonlinear Microwave and Millimetre-Wave Circuits. IEEE(10.1109/INMMiC54248.2022.9762106)
Azad, E. M. et al. 2022. New formulation of Cardiff behavioral model including DC bias voltage dependence. IEEE Microwave and Wireless Components Letters (10.1109/LMWC.2022.3140653)
Baddeley, A. et al. 2022. Gate bias voltage dependence of Cardiff admittance model in Ka-band GaAs pHEMTs. Presented at: IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR) Las Vegas, NV, USA 16-19 January 2022. 2022 IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR). IEEE. , pp.8-10. (10.1109/PAWR53092.2022.9719858)
Balasubramaniam, K. et al., 2022. Multi step structural health monitoring approaches in debonding assessment in a sandwich honeycomb composite structure using ultrasonic guided waves. Measurement 194 111057. (10.1016/j.measurement.2022.111057)
Baqain, S. , Borodich, F. M. and Brousseau, E. 2022. Characterisation of an AFM tip bluntness using indentation of soft materials. In: Borodich, F. and Jin, X. eds. Contact Problems for Soft, Biological and Bioinspired Materials. Vol. 15, Biologically-Inspired Systems Cham: , pp.221-242. (10.1007/978-3-030-85175-0_11)
Barter, M. et al. 2022. Design considerations of a dual mode X-band EPR resonator for rapid in-situ microwave heating. Applied Magnetic Resonance (10.1007/s00723-022-01463-1)
Bastida, H. et al. 2022. Dynamic modelling of ice-based thermal energy storage for cooling applications. IET Energy Systems Integration (10.1049/esi2.12061)
Bastida, H. et al., 2022. An experimental facility for latent heat thermal energy storage units. Presented at: ENERGYCON 2022 Riga, Latvia 2-12 May 2022.
Biggs, P. et al. 2022. Gait function improvements, using Cardiff Classifier, are related to patient-reported function and pain following hip arthroplasty. Journal of Orthopaedic Research 40 (5), pp.1182-1193. (10.1002/jor.25149)
Bisagni, C. et al., 2022. Comparison of numerical analyses of a composite wing component subjected to 4-point bending. Composites Part C: Open Access 8 100264. (10.1016/j.jcomc.2022.100264)
Bishop, S. G. et al. 2022. Enhanced light collection from a gallium nitride color center using a near index-matched solid immersion lens. Applied Physics Letters 120 114001. (10.1063/5.0085257)
Borodich, F. M. 2022. The JKR formalism in applications to problems of adhesive contact. In: Borodich, F. M. and Jin, X. eds. Contact Problems for Soft, Biological and Bioinspired Materials. Vol. 15, Biologically-Inspired Systems Cham: , pp.243-287. (10.1007/978-3-030-85175-0_12)
Borodich, F. M. et al. 2022. Adhesion of living cells: mechanisms of adhesion and contact models. In: Borodich, F. M. and Jin, X. eds. Contact Problems for Soft, Biological and Bioinspired Materials. Biologically-Inspired Systems. Vol. 15, Springer. , pp.1-30. (10.1007/978-3-030-85175-0_1)
Borodich, F. M. and Gorb, S. N. 2022. Spreading of red caviar cells: the knife-cell and the cell-cell adhesive interactions. In: Contact Problems for Soft, Biological and Bioinspired Materials. Vol. 15, , pp.117–137. (10.1007/978-3-030-85175-0_7)
Brocchini, M. et al., 2022. Interaction between breaking-induced vortices and near-bed structures. Part 1. Experimental and theoretical investigation. Journal of Fluid Mechanics 940 A44. (10.1017/jfm.2022.260)
Castelli, A. et al. 2022. Review of decontamination protocols for shared non-critical objects in 35 policies of UK NHS acute care organizations. Journal of Hospital Infection 120 , pp.65-72. (10.1016/j.jhin.2021.10.021)
Castro-Castellon, A. T. et al. 2022. Ecotoxicity of microplastics to freshwater biota: Considering exposure and hazard across trophic levels. Science of the Total Environment 816 151638. (10.1016/j.scitotenv.2021.151638)
Chang, Y. et al., 2022. Capture mechanism and optimal design of micro-particle traps in HVAC/HVDC gas insulated equipment. IEEE Transactions on Power Delivery (10.1109/TPWRD.2022.3155641)
Chaudry, M. et al. 2022. The implications of ambitious decarbonisation of heat and road transport for Britain's net zero carbon energy systems. Applied Energy 305 117905. (10.1016/j.apenergy.2021.117905)
Chen, J. et al., 2022. Harmonic suppression of charging station based on harmonic superposition. Presented at: The 16th Annual Conference of China Electrotechnical Society and China Electrotechnical Society´s 40th Anniversary Conference (ACCES2021) Beijing, China 24-26 September 2021. Published in: Liang, X. et al., The proceedings of the 16th Annual Conference of China Electrotechnical Society. Vol. 2.Lecture Notes in Electrical Engineering Singapore: Springer. , pp.1216-1223. (10.1007/978-981-19-1870-4_128)
Chen, X. , Nie, G. and Wu, Z. 2022. Global buckling and wrinkling of variable angle tow composite sandwich plates by a modified extended high-order sandwich plate theory. Composite Structures 292 115639. (10.1016/j.compstruct.2022.115639)
Chen, C. et al., 2022. Extreme events, energy security and equality through micro- and macro-levels: Concepts, challenges and methods. Energy Research and Social Science 85 102401. (10.1016/j.erss.2021.102401)
Chen, J. et al. 2022. Analysis and mitigation of DC voltage imbalance for medium-voltage cascaded three-level neutral-point-clamped converters. IEEE Transactions on Power Electronics 37 (4), pp.4320-4336. (10.1109/TPEL.2021.3129877)
Chen, J. et al. 2022. Demonstration of converter control Interactions in MMC-HVDC systems. Electronics 11 (2) 175. (10.3390/electronics11020175)
Chen, L. L. et al., 2022. Bi-material topology optimization for fully coupled structural-acoustic systems with isogeometric FEM-BEM. Engineering Analysis with Boundary Elements 135 , pp.182-195. (10.1016/j.enganabound.2021.11.005)
Chen, L. et al., 2022. A sample-efficient deep learning method for multivariate uncertainty qualification of acoustic-vibration interaction problems. Computer Methods in Applied Mechanics and Engineering 393 114784. (10.1016/j.cma.2022.114784)
Chen, M. et al. 2022. Modelling anisotropic adsorption-induced coal swelling and stress dependent anisotropic permeability. International Journal of Rock Mechanics and Mining Sciences 153 105107. (10.1016/j.ijrmms.2022.105107)
Chen, Y. et al., 2022. A data-driven approach design for carbon emission prediction of machining. Presented at: International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC-CIE 2022) St. Louis, MO, USA 14-17 August 2022.
Chen, Z. , Morini, L. and Gei, M. 2022. Negative refraction for anti-plane elastic waves in canonical quasicrystalline laminates. European Journal of Mechanics - A/Solids (10.1016/j.euromechsol.2022.104577)
Cheng, D. et al., 2022. Additive manufacturing of lithium aluminosilicate glass-ceramic/metal 3D electronic components via multiple material laser powder bed fusion. Additive Manufacturing 49 102481. (10.1016/j.addma.2021.102481)
Cimarelli, A. et al., 2022. Structure of turbulence in temporal planar jets. Physics of Fluids 34 (4) 45109. (10.1063/5.0085091)
Cripps, S. C. 2022. Moving goalposts [microwave bytes]. IEEE Microwave Magazine 23 (5), pp.20-25. (10.1109/MMM.2022.3148151)
Cripps, S. C. 2022. Tuning up [microwave bytes]. IEEE Microwave Magazine 23 (2), pp.16-54. (10.1109/MMM.2021.3125471)
Cui, T. , Kulasegaram, S. and Li, H. 2022. Predicting fresh and hardened properties of self-compacting concrete containing fly ash by artificial neural network model. Presented at: Concrete Solutions 2022:8th International Conference on Concrete Repair, Durability, Service Life and Concrete Technology 11-13 July 2022.
De La Cruz-Loredo, I. , Ugalde-Loo, C. E. and Abeysekera, M. 2022. Dynamic simulation and control of the heat supply system of a civic building with thermal energy storage units. IET Generation, Transmission and Distribution (10.1049/gtd2.12453)
Deakin, M. et al., 2022. Hybrid open points: an efficient tool for increasing network capacity in distribution systems. IEEE Transactions on Power Delivery 37 (2), pp.1340-1343. (10.1109/TPWRD.2021.3136772)
Dehaghani, E. S. , Cipcigan, L. and Williamson, S. S. 2022. The role of electric vehicles in smart grids. In: Zambroni de Souza, A. C. and Venkatesh, B. eds. Planning and Operation of Active Distribution Networks. Vol. 826, Lecture Notes in Electrical Engineering Springer Science Business Media. , pp.123-151. (10.1007/978-3-030-90812-6_5)
Dong, B. et al., 2022. Integrated modeling of 2D urban surface and 1D sewer hydrodynamic processes and flood risk assessment of people and vehicles. Science of the Total Environment 827 154098. (10.1016/j.scitotenv.2022.154098)
Drahota, A. et al., 2022. Shock-absorbing flooring for fall-related injury prevention in older adults and staff in hospitals and care homes: the SAFEST systematic review. Health Technology Assessment 25 (5)(10.3310/ZOWL2323)
Drahota, A. et al., 2022. The SAFEST review: a mixed methods systematic review of shock-absorbing flooring for fall-related injury prevention. BMC Geriatrics 22 32. (10.1186/s12877-021-02670-4)
Duan, S. et al., 2022. A grid inductance detection method based on the oscillation characteristic of inverter terminal voltage. IEEE Transactions on Power Electronics 37 (6), pp.7209-7217. (10.1109/TPEL.2021.3139886)
Duque-Redondo, E. , Masoero, E. and Manzano, H. 2022. Nanoscale shear cohesion between cement hydrates: The role of water diffusivity under structural and electrostatic confinement. Cement and Concrete Research 154 106716. (10.1016/j.cemconres.2022.106716)
El Fajri, O. et al., 2022. Numerical study of the effect of tip-speed ratio on hydrokinetic turbine wake recovery. Renewable Energy 182 , pp.725-750. (10.1016/j.renene.2021.10.030)
Elnour, M. et al., 2022. Neural network-based model predictive control system for optimizing building automation and management systems of sports facilities. Applied Energy 318 , pp.119-153. (10.1016/j.apenergy.2022.119153)
Elnour, M. et al., 2022. Performance and energy optimization of building automation and management systems: Towards smart sustainable carbon-neutral sports facilities. Renewable and Sustainable Energy Reviews 162 112401. (10.1016/j.rser.2022.112401)
Evans, J. et al., 2022. Data sharing across osteoarthritis research groups and disciplines: Opportunities and challenges. Osteoarthritis and Cartilage Open 4 (1) 100236. (10.1016/j.ocarto.2022.100236)
Fang, X. et al., 2022. An energy absorbing method for hybrid mmcs to avoid full-bridge submodule overvoltage during DC fault blocking. IEEE Transactions on Power Electronics 37 (5), pp.4947-4951. (10.1109/TPEL.2021.3130766)
Farhat, A. K. M. , Morini, L. and Gei, M. 2022. Silver-mean canonical quasicrystalline-generated phononic waveguides. Journal of Sound and Vibration 523 116679. (10.1016/j.jsv.2021.116679)
Fawwaz Aalrebei, O. et al., 2022. Ammonia-hydrogen-air gas turbine cycle and control analyses. International Journal of Hydrogen Energy 47 (13), pp.8603-8620. (10.1016/j.ijhydene.2021.12.190)
Fawwaz Alrebei, O. et al. 2022. Planar laser-induced fluorescence and chemiluminescence analyses of CO2-argon-steam oxyfuel (CARSOXY) combustion. Energies 15 (1) 263. (10.3390/en15010263)
Fnais, A. et al. 2022. The application of life cycle assessment in buildings: challenges, and directions for future research. International Journal of Life Cycle Assessment (10.1007/s11367-022-02058-5)
Gan, W. et al. 2022. A low-carbon planning method for joint regional-district multi-energy systems: From the perspective of privacy protection. Applied Energy 311 118595. (10.1016/j.apenergy.2022.118595)
Gang, A. et al., 2022. Performance analysis of a coast - OWC wave energy converter integrated system. Applied Energy 311 118605. (10.1016/j.apenergy.2022.118605)
Gao, K. et al. 2022. Robust topology optimization of structures under uncertain propagation of imprecise stochastic-based uncertain field. Thin-Walled Structures 175 109238. (10.1016/j.tws.2022.109238)
Gao, W. and Kavazanjian, E. 2022. A constitutive model for municipal solid waste considering mechanical creep and biodegradation-induced compression. Acta Geotechnica 17 (1), pp.37–63. (10.1007/s11440-021-01202-z)
Gao, W. , Kavazanjian, E. and Wu, X. 2022. Numerical study of strain development in high-density polyethylene geomembrane liner system in landfills using a new constitutive model for municipal solid waste. Geotextiles and Geomembranes 50 (2), pp.216-230. (10.1016/j.geotexmem.2021.09.007)
Gao, W. , Zagorščak, R. and Thomas, H. R. 2022. Insights into ground response during underground coal gasification through thermo-mechanical modeling. International Journal for Numerical and Analytical Methods in Geomechanics 46 (1), pp.3-22. (10.1002/nag.3287)
Gao, W. , Zagorscak, R. and Thomas, H. R. 2022. Numerical study of ground deformation during underground coal gasification through coupled flow-geomechanical modelling. Fuel 315 122833. (10.1016/j.fuel.2021.122833)
Gao, Y. , Li, H. and Xiong, G. 2022. An efficient and resilient digital-twin communication framework for smart bridge structural survey and maintenance. Presented at: 29th EG-ICE International Workshop on Intelligent Computing in Engineering 2022 Aarhus, Denmark 06-08 July 2022.
Ghazwan, A. et al. 2022. Knee osteoarthritis alters peri-articular knee muscle strategies during gait. PLoS ONE 17 (1) e0262798. (10.1371/journal.pone.0262798)
Ghoroghi, A. et al. 2022. Advances in application of machine learning to life cycle assessment: a literature review. International Journal of Life Cycle Assessment 27 , pp.433-456. (10.1007/s11367-022-02030-3)
Giakoumaki, A. N. et al., 2022. Quantum technologies in diamond enabled by laser processing. Applied Physics Letters 120 (2) 20502. (10.1063/5.0080348)
Giasin, K. et al., 2022. Effect of fibre orientation on impact damage resistance of S2/FM94 glass fibre composites for aerospace applications: an experimental evaluation and numerical validation. Polymers 14 (1) 95. (10.3390/polym14010095)
Goda, K. et al., 2022. Scenario-based earthquake risk assessment for central-southern Malawi: The case of the Bilila-Mtakataka Fault. International Journal of Disaster Risk Reduction 67 102655. (10.1016/j.ijdrr.2021.102655)
Goetz, A. et al., 2022. Addressing materials' microstructure diversity using transfer learning. npj Computational Materials 8 27. (10.1038/s41524-022-00703-z)
Grigg, S. , Pullin, R. and Featherston, C. 2022. Acoustic emission source location in complex aircraft structures using three closely spaced sensors. Mechanical Systems and Signal Processing 164 108256. (10.1016/j.ymssp.2021.108256)
Guillena, E. et al., 2022. Reconfigurable DPD based on ANNs for wideband load modulated balanced amplifiers under dynamic operation from 1.8 to 2.4 GHz. IEEE Transactions on Microwave Theory and Techniques 70 (1), pp.453-465.
Gundimeda, A. et al., 2022. Investigation of wurtzite formation in MOVPE-grown zincblende GaN epilayers on AlxGa1−xN nucleation layers. Journal of Applied Physics 131 (11) 115703. (10.1063/5.0077186)
Gundimeda, A. et al., 2022. Influence of AlxGa1-xN nucleation layers on MOVPE-grown zincblende GaN epilayers on 3C-SiC/Si(001). Journal of Physics D: Applied Physics 55 (7) 175110. (10.1088/1361-6463/ac4c58)
Guo, B. 2022. Hydro-environmental modelling and interaction of tidal lagoons around the UK coast. PhD Thesis , Cardiff University.
Guo, X. , Jiang, Y. and Liu, Y. 2022. Conceptual design for innovation: a knowledge-based approach. In: Kyratsis, P. , Efkolidis, N. and Davim, J. P. eds. Advances in Product Design Engineering. Springer. , pp.179-198. (10.1007/978-3-030-98124-2_8)
Hamilton, R. I. , Garden, C. L. and Brown, S. J. 2022. Immediate effect of a spinal mobilisation intervention on muscle stiffness, tone and elasticity in subjects with lower back pain - A randomized cross-over trial. Journal of Bodywork and Movement Therapies 29 , pp.60-67. (10.1016/j.jbmt.2021.09.032)
Harper, J. et al. 2022. Influence of alternative fuel properties and combustor operating conditions on the nvPM and gaseous emissions produced by a small-scale RQL combustor. Fuel 315 123045. (10.1016/j.fuel.2021.123045)
Heydarpour, Y. , Malekzadeh, P. and Zhu, H. 2022. Three-dimensional response of multilayer FG-GPLRC spherical panels under blast loading. International Journal of Structural Stability and Dynamics (10.1142/S0219455422501115)
Hu, Q. et al., 2022. Surface flashover induced by metal contaminants adhered to tri-post epoxy insulators under superimposed direct and lightning impulse voltages. Polymers 14 (7) 1374. (10.3390/polym14071374)
Hu, H. , Liu, Y. and Lu, W. F. 2022. Establishing product appearance specifications with the identification of user aesthetic needs in product conceptual design. In: Kyratsis, P. , Efkolidis, N. and Davim, J. P. eds. Advances in Product Design Engineering. Springer. , pp.199-217. (10.1007/978-3-030-98124-2_9)
Hu, H. et al., 2022. A knowledge-based approach towards representation and archiving of aesthetic information for product conceptual design. Journal of Computing and Information Science in Engineering 22 (4) 41011. (10.1115/1.4053674)
Hua, W. et al., 2022. Applications of blockchain and artificial intelligence technologies for enabling prosumers in smart grids: A review. Renewable and Sustainable Energy Reviews 161 112308. (10.1016/j.rser.2022.112308)
Hua, W. et al. 2022. Blockchain enabled decentralized local electricity markets with flexibility from heating sources. IEEE Transactions on Smart Grid (10.1109/TSG.2022.3158732)
Hua, W. et al. 2022. Data-driven prosumer-centric energy scheduling using convolutional neural networks. Applied Energy 308 118361. (10.1016/j.apenergy.2021.118361)
Ibrahim, A. et al. 2022. New hybrid invasive weed optimization and machine learning approach for fault detection. Energies 15 (4) 1488. (10.3390/en15041488)
Jefferson, A. D. and Freeman, B. L. 2022. A crack-opening-dependent numerical model for self-healing cementitious materials. International Journal of Solids and Structures 244-24 111601. (10.1016/j.ijsolstr.2022.111601)
Ji, H. et al., 2022. Fluvial sediment source to sink transfer at the Yellow River Delta: Quantifications, causes, and environmental impacts. Journal of Hydrology 608 127622. (10.1016/j.jhydrol.2022.127622)
Jia, W. et al., 2022. RS-Net: robust segmentation of green overlapped apples. Precision Agriculture 23 , pp.492-513. (10.1007/s11119-021-09846-3)
Jian, J. et al., 2022. Multi-stage supply restoration of active distribution networks with SOP integration. Sustainable Energy, Grids and Networks 29 100562. (10.1016/j.segan.2021.100562)
Jiang, X. et al. 2022. An overview of soft open points in electricity distribution networks. IEEE Transactions on Smart Grid (10.1109/TSG.2022.3148599)
Jie, X. et al., 2022. Size-dependent microwave heating and catalytic activity of fine iron particles in the deep dehydrogenation of hexadecane. Chemistry of Materials (10.1021/acs.chemmater.2c00630)
Jin, F. 2022. Chapter 20 - Sustainable utilization of slags. In: Tsang, D. and Wang, L. eds. Low Carbon Stabilization and Solidification of Hazardous Wastes. Elsevier. , pp.321-341. (10.1016/B978-0-12-824004-5.00016-5)
Jin, X. , Li, P. and Borodich, F. M. 2022. Indentation tests of biological materials: Theoretical aspects. In: Borodich, F. M. and Jin, X. eds. Contact Problems for Soft, Biological and Bioinspired Materials. Vol. 15, Biologically-Inspired Systems Cham: , pp.181-198. (10.1007/978-3-030-85175-0_9)
Jing, R. , Zhou, Y. and Wu, J. 2022. Electrification with flexibility towards local energy decarbonization. Advances in Applied Energy 5 100088. (10.1016/j.adapen.2022.100088)
Kamel, S. et al., 2022. An efficient electric charged particles optimization algorithm for numerical optimization and optimal estimation of photovoltaic models. Mathematics 10 (6) 913. (10.3390/math10060913)
Kanellopoulos, A. et al., 2022. Self-adaptive construction materials: future directions. In: Kanellopoulos, A. and Norambuena-Contreras, J. eds. Self-Healing Construction Materials: Fundamentals, Monitoring and Large Scale Applications. Engineering Materials and Processes Switzerland: Springer International Publishing. , pp.215-226. (10.1007/978-3-030-86880-2_8)
Karunarathne, E. , Wijethunge, A. and Ekanayake, J. 2022. Enhancing PV hosting capacity using voltage control and employing dynamic line rating. Energies 15 (1) 134. (10.3390/en15010134)
Keenan, B. E. et al. 2022. MRI safety, imaging artefacts, and grid distortion evaluated for FFP3 respiratory masks worn throughout the COVID-19 pandemic. Clinical Radiology (10.1016/j.crad.2022.05.001)
Keenan, B. E. , Evans, S. L. and Oomens, C. 2022. A review of foot finite element modelling for pressure ulcer prevention in bedrest: current perspectives and future recommendations. Journal of Tissue Viability 31 (1), pp.73-83. (10.1016/j.jtv.2021.06.004)
Khudhair, A. et al. 2022. A theoretical holistic decision-making framework supporting collaborative design based on common data analysis (CDA) method. Journal of Building Engineering 46 103686. (10.1016/j.jobe.2021.103686)
Kovaleva, M. et al. 2022. Numerical and experimental study of product gas characteristics in premixed ammonia/methane/air laminar flames stabilised in a stagnation flow. Fuel Communications 10 100054. (10.1016/j.jfueco.2022.100054)
Krokos, V. et al. 2022. A Bayesian multiscale CNN framework to predict local stress fields in structures with microscale features. Computational Mechanics 69 , pp.733-766. (10.1007/s00466-021-02112-3)
Kul, S. , Anayi, F. and Meydan, T. 2022. Experimental comparison of localised magnetostriction difference under sinusoidal and PWM excitations. Journal of Magnetism and Magnetic Materials 544 168692. (10.1016/j.jmmm.2021.168692)
Kumar, A. , Varghese, A. and Janyani, V. 2022. Fabrication of graphene-ZnO heterostructure-based flexible and thin platform-based UV detector. Journal of Materials Science: Materials in Electronics 33 , pp.3880-3890. (10.1007/s10854-021-07578-8)
Lambay, A. et al. 2022. Effects of demographic factors for fatigue detection in manufacturing. Presented at: 14th IFAC Workshop on Intelligent Manufacturing Systems (IMS 2022) Tel-Aviv, Israel 28-30 March 2022. IFAC-PapersOnLine. Vol. 55(2).Elsevier. , pp.528-533. (10.1016/j.ifacol.2022.04.248)
Li, C. , Wang, S. and Liang, J. 2022. Tuning method of a grid-following converter for the extremely-weak-grid connection. IEEE Transactions on Power Systems (10.1109/TPWRS.2022.3167899)
Li, C. et al. 2022. Improved grid impedance compensation for phase-locked loop to stabilize the very-weak-grid connection of VSI's. IEEE Transactions on Power Delivery (10.1109/TPWRD.2021.3140024)
Li, C. et al. 2022. Dominant instability mechanism of VSI connecting to a very weak grid. IEEE Transactions on Power Systems 37 (1), pp.828-831. (10.1109/TPWRS.2021.3115968)
Li, H. et al., 2022. Free vibration of FGM Mindlin plates submerged in fluid. Engineering Structures 259 114144. (10.1016/j.engstruct.2022.114144)
Li, P. et al., 2022. Quantized event-driven simulation for integrated energy systems with hybrid continuous-discrete dynamics. Applied Energy 307 118268. (10.1016/j.apenergy.2021.118268)
Li, P. et al., 2022. Deep reinforcement learning-based adaptive voltage control of active distribution networks with multi-terminal soft open point. International Journal of Electrical Power & Energy Systems 141 108138. (10.1016/j.ijepes.2022.108138)
Li, Q. et al., 2022. Physical modelling of energy losses at surcharged three-way junction manholes in drainage system. Water Science and Technology 85 (4), pp.1011-1026. 639. (10.2166/wst.2021.639)
Li, Q. et al., 2022. Hazard and vulnerability in urban inundated underground space: Hydrodynamic analysis of human instability for stairway evacuation. International Journal of Disaster Risk Reduction 70 102754. (10.1016/j.ijdrr.2021.102754)
Li, Y. et al. 2022. Knowledge distillation for energy consumption prediction in additive manufacturing. Presented at: 14th IFAC Workshop on Intelligent Manufacturing Systems (IMS 2022) Tel-Aviv, Israel 28-30 March 2022. IFAC-PapersOnLine. Vol. 55(2).Elsevier. , pp.390-395. (10.1016/j.ifacol.2022.04.225)
Li, Z. et al., 2022. A material removal prediction method based on multi-scale attention mechanism. Presented at: International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC-CIE 2022) St. Louis, MO, USA 14-17 August 2022.
Lian, H. et al., 2022. Noise pollution reduction through a novel optimization procedure in passive control methods. Computer Modeling in Engineering & Sciences 131 (1), pp.1-18. (10.32604/cmes.2022.019705)
Liguori, P. and Gei, M. 2022. Surface instabilities of soft dielectric elastomers with implementation of electrode stiffness. Mathematics and Mechanics of Solids (10.1177/10812865221084309)
Liu, E. et al., 2022. Performance analysis and structure optimization of shale gas desander. Energy Sources Part A: Recovery, Utilization, and Environmental Effects (10.1080/15567036.2022.2040656)
Liu, E. et al., 2022. Correlation analysis of pipeline corrosion and liquid accumulation in gas gathering station based on computational fluid dynamics. Journal of Natural Gas Science and Engineering 102 104564. (10.1016/j.jngse.2022.104564)
Liu, C. et al. 2022. Digital twin-enabled collaborative data management for metal additive manufacturing systems. Journal of Manufacturing Systems 62 , pp.857-874. (10.1016/j.jmsy.2020.05.010)
Liu, E. et al., 2022. Research on abnormal vibration and vibration reduction measures of a natural gas compressor station: a case study of the JYG compressor station. Energy and Fuels 36 (2), pp.897–909. (10.1021/acs.energyfuels.1c03849)
Liu, Y. et al., 2022. Artificial Neural Network (ANN) - Bayesian Probability Framework (BPF) based method of dynamic force reconstruction under multi-source uncertainties. Knowledge-Based Systems 237 107796. (10.1016/j.knosys.2021.107796)
Liu, Y. , Wang, L. and Li, M. 2022. Kalman filter–random forest-based method of dynamic load identification for structures with interval uncertainties. Structural Control and Health Monitoring 29 (5) e2935. (10.1002/stc.2935)
Liu, Y. et al., 2022. A distributed dynamic load identification method based on the hierarchical-clustering-oriented radial basis function framework using acceleration signals under convex-fuzzy hybrid uncertainties. Mechanical Systems and Signal Processing 172 108935. (10.1016/j.ymssp.2022.108935)
Lofty, J. et al. 2022. Microplastics removal from a primary settler tank in a wastewater treatment plant and estimations of contamination onto European agricultural land via sewage sludge recycling. Environmental Pollution 304 119198. (10.1016/j.envpol.2022.119198)
Lyrio de Oliveira, L. , de Oliveira Ribeiro, C. and Qadrdan, M. 2022. Analysis of electricity supply and demand intra-annual dynamics in Brazil: A multi-period and multi-regional generation expansion planning model. International Journal of Electrical Power & Energy Systems 137 107886. (10.1016/j.ijepes.2021.107886)
Ma, Y. and Zhu, H. 2022. Elasto-plastic behaviour of three-dimensional stochastic fibre networks. In: Silberschmidt, V. V. ed. Mechanics of Fibrous Networks. Elsevier. , pp.165-178. (10.1016/B978-0-12-822207-2.00006-4)
Ma, S. et al., 2022. Prediction of mechanical properties of 3d printed lattice structures through machine learning. Journal of Computing and Information Science in Engineering 22 (3) 31008. (10.1115/1.4053077)
Ma, S. et al., 2022. Programmable intrusion detection for distributed energy resources in cyber-physical networked microgrids. Applied Energy 306 (PartB) 118056. (10.1016/j.apenergy.2021.118056)
Ma, Y. et al., 2022. THMC constitutive model for membrane geomaterials based on mixture coupling theory. International Journal of Engineering Science 171 103605. (10.1016/j.ijengsci.2021.103605)
Maadjoudj, D. et al., 2022. Features characterizing the surface state of HV insulator glass model under desert pollution. IEEE Transactions on Dielectrics and Electrical Insulation 28 (6), pp.1964-1972. (10.1109/TDEI.2021.009739)
MacKinnon, R. J. et al., 2022. Adaptations to practice and resilience in a paediatric major trauma centre during a mass casualty incident. British Journal of Anaesthesia 128 (2), pp.e120-e126. (10.1016/j.bja.2021.07.024)
Maddalena, R. et al. 2022. Applications and life cycle assessment of shape memory polyethylene terephthalate in concrete for crack closure. Polymers 14 (5) 933. (10.3390/polym14050933)
Manjunath, A. D. B. et al., 2022. Investigation into variation of resistivity and permittivity of aqueous solutions and soils with frequency and current density. IEEE Transactions on Electromagnetic Compatibility 64 (2), pp.443-455. (10.1109/TEMC.2021.3127640)
Mashruk, S. et al. 2022. Combustion features of CH4/NH3/H2 ternary blends. International Journal of Hydrogen Energy (10.1016/j.ijhydene.2022.03.254)
Masoero, E. et al. 2022. Topology optimization using the discrete element method. Part 2: Material nonlinearity. Meccanica 57 , pp.1233-1250. (10.1007/s11012-022-01492-x)
McCrory, J. P. et al. 2022. Acoustic emission monitoring of metals. In: Grosse, C. U. et al., Acoustic Emission Testing: Basics for Research – Applications in Engineering. Springer. , pp.529-565. (10.1007/978-3-030-67936-1_18)
Meng, J. et al., 2022. Anisotropic GPMP2: a fast continuous-time Gaussian processes based motion planner for unmanned surface vehicles in environments with ocean currents. IEEE Transactions on Automation Science and Engineering (10.1109/TASE.2021.3139163)
Meng, K. et al., 2022. Ontology-based approach supporting multi-objective holistic decision making for energy pile system. Buildings 12 (2) 236. (10.3390/buildings12020236)
Michelarakis, M. et al. 2022. Triple point surface discharge photography in atmospheric gases using Intensified high-speed camera system. IEEE Transactions on Dielectrics and Electrical Insulation 29 (1), pp.153-161. (10.1109/TDEI.2022.3148481)
Mikaeili, E. , Claus, S. and Kerfriden, P. 2022. Concurrent multiscale analysis without meshing: microscale representation with CutFEM and micro/macro model blending. Computer Methods in Applied Mechanics and Engineering 393 114807. (10.1016/j.cma.2022.114807)
Mimoun, A. and Kulasegaram, S. 2022. Developing self-compacting steel fibre reinforced concrete (SCSFRC) mixes based on target plastic viscosity and compressive strength. Presented at: 7th International Conference on Structural Engineering and Concrete Technology (ICSECT 2022) Lisbon, Portugal 10-12 April 2022.
Mimoun, A. and Kulasegaram, S. 2022. Plastic-viscosity based mix design and the effect of limestone powder on material performance of self-compacting concrete. Proceedings of the ICE - Construction Materials (10.1680/jcoma.21.00038)
Min, G. 2022. New formulation of the theory of thermoelectric generator for operation under constant heat flux. Energy & Environmental Science 15 , pp.356-367. (10.1039/D1EE03114G)
Min, G. 2022. Prospective photovoltaic-thermoelectric hybrid system. ES Materials & Manufacturing 16 , pp.13-18. (10.30919/esmm5e606)
Mohammad, A. et al. 2022. Leachate characteristics: Potential indicators for monitoring various phases of municipal solid waste decomposition in a bioreactor landfill. Journal of Environmental Management 309 114683. (10.1016/j.jenvman.2022.114683)
Mohsin, M. H. et al., 2022. Synthesis of NiO/Si using sol-gel as a photosensor. Silicon 14 , pp.1349-1355. (10.1007/s12633-020-00872-w)
Mudaheranwa, E. et al. 2022. Estimation of Rwanda's power system inertia as input for long-term dynamic frequency response regulation planning. Electric Power Systems Research 207 107853. (10.1016/j.epsr.2022.107853)
Musolino, G. , Ahmadian, R. and Xia, J. 2022. Enhancing pedestrian evacuation routes during flood events. Natural Hazards (10.1007/s11069-022-05251-9)
Niland, A. et al. 2022. Experimental investigation of effervescent atomization: Part I. Comparison of flat-end and streamlined aerator body designs. Atomization and Sprays 32 (4), pp.53-75. (10.1615/AtomizSpr.2022039407)
Niland, A. et al. 2022. Experimental investigation of effervescent atomization: Part II. Internal flow and spray characterization with novel DARPA SUBOFF afterbody streamline aerator. Atomization and Sprays 32 (4), pp.25-51. (10.1615/AtomizSpr.2022039408)
O'Shaughnessy, C. , Masoero, E. and Gosling, P. 2022. Topology optimization using the discrete element method. Part 1: Methodology, validation, and geometric nonlinearity. Meccanica 57 (6), pp.1213-1231. (10.1007/s11012-022-01493-w)
Patton, A. M. et al. 2022. Hydro-geomechanical characterisation of a coastal urban aquifer using multiscalar time and frequency domain groundwater-level responses. Hydrogeology Journal 29 , pp.2751-2771. (10.1007/s10040-021-02400-5)
Peng, Y. et al., 2022. Using artificial intelligence technology to fight COVID-19: a review. Artificial Intelligence Review (10.1007/s10462-021-10106-z)
Peralta, P. et al., 2022. Electromechanical properties identification for groups of piezoelectric energy harvester based on Bayesian inference. Mechanical Systems and Signal Processing 162 108034. (10.1016/j.ymssp.2021.108034)
Phanendra Kumar, A. et al., 2022. Multistability of connected variable stiffness laminates. Presented at: ICRACEM 2020 Online 4-6 Sept 2020. Recent Advances in Computational and Experimental Mechanics, Vol—I. Lecture Notes in Mechanical Engineering Singapore: Springer. , pp.51. (10.1007/978-981-16-6738-1_5)
Poole, R. L. et al., 2022. Axonics sacral neuromodulation system for treating refractory overactive bladder: a NICE medical technologies guidance. Applied Health Economics and Health Policy 20 (3), pp.305–313. (10.1007/s40258-021-00701-0)
Prato, A. et al., 2022. Buckling and post-buckling of thin-walled stiffened panels: modelling imperfections and joints. Thin-Walled Structures 172 108938. (10.1016/j.tws.2022.108938)
Purcell, F. A. et al. 2022. Lamb wave mode spectroscopy on complex structures with amplitude-based feature detection. NDT and E International: Independent Nondestructive Testing and Evaluation 130 102649. (10.1016/j.ndteint.2022.102649)
Qin, J. et al. 2022. Research and application of machine learning for additive manufacturing. Additive Manufacturing 52 102691. (10.1016/j.addma.2022.102691)
Quaglia, R. et al. 2022. Mitigation of load mismatch effects using an orthogonal load modulated balanced amplifier. IEEE Transactions on Microwave Theory and Techniques (10.1109/TMTT.2022.3167414)
Rajamony, R. et al. 2022. Multi-objective design of single-phase differential buck inverters with active power decoupling. IEEE Open Journal of Power Electronics 3 , pp.105-114. (10.1109/OJPEL.2022.3147769)
Ramos, H. et al., 2022. Response of gyroid lattice structures to impact loads. International Journal of Impact Engineering 164 104202. (10.1016/j.ijimpeng.2022.104202)
Rayamane, P. , Ji, Z. and Packianather, M. 2022. Design and development of a robust vision-based tactile sensor. Presented at: 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics 11-15 July 2022.
Robson, S. and Haddad, M. 2022. A chirp spread spectrum modulation scheme for robust power line communication. IEEE Transactions on Power Delivery
Sadasivam, S. et al. 2022. Characterisation of inorganic constitutions of condensate and solid residue generated from small-scale ex situ experiments in the context of underground coal gasification. Environmental Science and Pollution Research 29 , pp.2203-2213. (10.1007/s11356-021-15780-8)
Samad, B. A. et al., 2022. Modelling of LQR and fuzzy-LQR controllers for stabilisation of multi-link robotic system (robogymnast). Presented at: 8th International Conference on Automation, Robotics and Applications (ICARA 2022) Prague, Czech Republic 18-20 February 2022. 2022 8th International Conference on Automation, Robotics and Applications (ICARA). IEEE. , pp.33-38. (10.1109/ICARA55094.2022.9738577)
Samaranayake, L. et al., 2022. Multi-terminal DC grid with wind power injection. Wind 2 (1), pp.17-36. (10.3390/wind2010002)
Santos, A. et al., 2022. Application of advanced (S)TEM methods for the study of nanostructured porous functional surfaces: A few working examples. Materials Characterization 185 111741. (10.1016/j.matchar.2022.111741)
Seward, W. , Qadrdan, M. and Jenkins, N. 2022. Quantifying the value of distributed battery storage to the operation of a low carbon power system. Applied Energy 305 117684. (10.1016/j.apenergy.2021.117684)
Shinde, A. B. et al., 2022. Comparative analysis of mechanical properties for mono and poly-crystalline copper under nanoindentation - Insights from molecular dynamics simulations. Materials Chemistry and Physics 277 125559. (10.1016/j.matchemphys.2021.125559)
Shouran, M. and Alsseid, A. 2022. Particle swarm optimization algorithm-tuned fuzzy cascade fractional order PI-Fractional order PD for frequency regulation of dual-area power system. Processes 10 (3) 477. (10.3390/pr10030477)
Shouran, M. , Anayi, F. and Packianather, M. 2022. Design of sliding mode control optimised by the Bees algorithm for LFC in the Great Britain power system. Materials Today: Proceedings 52 (3), pp.937-945. (10.1016/j.matpr.2021.10.322)
Shouran, M. et al. 2022. Different fuzzy control configurations tuned by the Bees Algorithm for LFC of two-area power system. Energies 15 (2) 657. (10.3390/en15020657)
Siddique, F. et al., 2022. Sustainable chemical processing of flowing wastewater through microwave energy. Chemosphere 287 (1) 132035. (10.1016/j.chemosphere.2021.132035)
Sikdar, S. , Liu, D. and Kundu, A. 2022. Acoustic emission data based deep learning approach for classification and detection of damage-sources in a composite panel. Composites Part B: Engineering 228 109450. (10.1016/j.compositesb.2021.109450)
Slater, D. 2022. A systems analysis of the UK COVID 19 pandemic response: part 2 - work as imagined vs work as done. Safety Science 146 105526. (10.1016/j.ssci.2021.105526)
Sliwa, R. E. et al., 2022. The latest advances in wireless communication in aviation, wind turbines and bridges. Inventions 7 (1) 18. (10.3390/inventions7010018)
Smith, L. D. et al., 2022. Examining chemical composition of gas turbine-emitted organic aerosol using positive matrix factorisation (PMF). Journal of Aerosol Science 159 105869. (10.1016/j.jaerosci.2021.105869)
Song, J. et al., 2022. Effect of remelting processes on the microstructure and mechanical behaviours of 18Ni-300 maraging steel manufactured by selective laser melting. Materials Characterization 184 111648. (10.1016/j.matchar.2021.111648)
Steer, J. , Greenslade, M. and Marsh, R. 2022. Correction: Steer et al. A Comparison of Laboratory Coal Testing with the Blast Furnace Process and Coal Injection. Metals 2021, 11, 1476. Metals 12 (1) 130. (10.3390/met12010130)
Sun, B. et al., 2022. A power decoupling control for wind power converter based on series-connected MMC and open-winding PMSG. IEEE Transactions on Industrial Electronics 69 (8), pp.8091-8101. (10.1109/TIE.2021.3099227)
Sun, F. et al., 2022. DSM pricing method based on A3C and LSTM under cloud-edge environment. Applied Energy 315 118853. (10.1016/j.apenergy.2022.118853)
Sushant, et al., 2022. Emerging eHealth IoT applications: a review on kiosk-based systems. In: Reinvention of Health Applications with IoT. CRC Press(10.1201/9781003166511-11)
Syryanyy, Y. et al., 2022. Polarized dependence of soft X-ray absorption near edge structure of ZnO films implanted by Yb. Materials Science in Semiconductor Processing 144 106609. (10.1016/j.mssp.2022.106609)
Tan, X. et al., 2022. Design and research of intelligent QA system for flight crew operating manual. Presented at: International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC-CIE 2022) St. Louis, MO, USA 14-17 August 2022.
Tang, M. et al., 2022. Regional-based strategies for municipality carbon mitigation: a case study of Chongqing in China. Energy Reports 8 , pp.4672-4694. (10.1016/j.egyr.2022.03.135)
Taylor, P. C. et al., 2022. An interdisciplinary research perspective on the future of multi-vector energy networks. International Journal of Electrical Power & Energy Systems 135 107492. (10.1016/j.ijepes.2021.107492)
Tong, Y. et al. 2022. A data-driven approach for integrating hedonic quality and pragmatic quality in user experience modelling. Journal of Computing and Information Science in Engineering 22 (6) 61002. (10.1115/1.4054155)
Vedantham, L. S. , Zhou, Y. and Wu, J. 2022. ICT infrastructure supporting smart local energy systems: a review. IET Energy Systems Integration (10.1049/esi2.12063)
Veeramani, S. and Muthuswamy, S. 2022. Reinforcement learning based path planning of multiple agents of SwarmItFIX robot for fixturing operation in sheetmetal milling process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (10.1177/09544054221080031)
Wan, Y. et al. 2022. Exploiting knowledge graph for multi-faceted conceptual modelling using GCN. Presented at: 3rd International Conference on Industry 4.0 and Smart Manufacturing (ISM 2021) Linz, Austria 17-19 November 2021. Vol. 200.Procedia Computer Science, Vol 200. , pp.1174-1183. (10.1016/j.procs.2022.01.317)
Wang, Y. et al., 2022. Novel extensible multilevel inverter based on switched-capacitor structure. Journal of power electronics (10.1007/s43236-022-00450-w)
Wang, J. et al., 2022. ReaxFF MD investigation on the damage mechanism of epoxy polymer exposed to DC corona discharge in SF6 gas. Presented at: International Conference on Advanced Electrical Equipment and Reliable Operation (AEERO) Beijing, China 15-17 Oct 2021. Proceedings International Conference on Advanced Electrical Equipment and Reliable Operation (AEERO). IEEE(10.1109/AEERO52475.2021.9708353)
Wang, L. , Liu, Y. and Li, M. 2022. Time-dependent reliability-based optimization for structural-topological configuration design under convex-bounded uncertain modeling. Reliability Engineering and System Safety 221 108361. (10.1016/j.ress.2022.108361)
Wang, L. et al., 2022. Convexity-oriented reliability-based topology optimization (CRBTO) in the time domain using the equivalent static loads method. Aerospace Science and Technology 123 107490. (10.1016/j.ast.2022.107490)
Wang, S. et al. 2022. A low-loss integrated circuit breaker for HVDC applications. IEEE Transactions on Power Delivery 37 (1), pp.472-485. (10.1109/TPWRD.2021.3063515)
Wang, S. et al., 2022. Adaptive genetic algorithm based on fuzzy reasoning for the multilevel capacitated lot-sizing problem with energy consumption in synchronizer production. Sustainability 14 (9) 5072. (10.3390/su14095072)
Wang, Y. et al., 2022. A single-input extended multilevel inverter based on switched-capacitor with reduced number of devices. International Journal of Electrical Power & Energy Systems 138 107872. (10.1016/j.ijepes.2021.107872)
Wang, Y. et al., 2022. A generalized switched-capacitor step-up multi-level inverter employing single DC source. Journal of Power and Energy Systems 8 (2), pp.439-451. (10.17775/CSEEJPES.2020.06280)
Wang, Y. et al., 2022. Extendable space-type switched-capacitor multilevel inverter with fault-tolerant capability. Journal of Power Electronics (10.1007/s43236-022-00436-8)
Wang, Z. , Zhang, Y. and Kennedy, D. 2022. Equivalent linearization method improved by higher order statistics in modal space for geometrically nonlinear vibrations. Computers and Structures 265 106788. (10.1016/j.compstruc.2022.106788)
Wei, C. et al., 2022. Learning manipulation skills with demonstrations for the swing process control of dredgers. Ocean Engineering 246 110545. (10.1016/j.oceaneng.2022.110545)
Wei, H. et al. 2022. Modelling and experimental validation of an EV torque distribution strategy towards active safety and energy efficiency. Energy 239 (Part A) 121953. (10.1016/j.energy.2021.121953)
Wei, H. et al. 2022. Deep reinforcement learning based direct torque control strategy for distributed drive electric vehicles considering active safety and energy saving performance. Energy 238 (Part B) 121725. (10.1016/j.energy.2021.121725)
Wei, H. et al. 2022. Planning integrated energy systems coupling V2G as a flexible storage. Energy 239 (B) 122215. (10.1016/j.energy.2021.122215)
Wei, L. 2022. Operation and protection of VSC-HVDC grids. PhD Thesis , Cardiff University.
Whatling, G. M. et al. 2022. Assessing functional recovery following total knee replacement surgery using objective classification of level gait data and patient-reported outcome measures. Clinical Biomechanics 95 105625. (10.1016/j.clinbiomech.2022.105625)
Wu, B. et al., 2022. Conceptual design of intelligent manufacturing equipment based on a multi-source heterogeneous requirement mapping method. Presented at: 14th IFAC Workshop on Intelligent Manufacturing Systems (IMS 2022) Tel-Aviv, Israel 28-30 March 2022. IFAC-PapersOnLine. Vol. 55(2).Elsevier. , pp.475-480. (10.1016/j.ifacol.2022.04.239)
Wu, X. et al., 2022. Vibrational power flow analysis of Timoshenko microbeams with a crack. Composite Structures 289 115483. (10.1016/j.compstruct.2022.115483)
Xia, J. et al., 2022. A unified formula for discharge capacity of street inlets for urban flood management. Journal of Hydrology 609 127667. (10.1016/j.jhydrol.2022.127667)
Xie, Z. et al. 2022. Large-eddy simulation of turbulent free surface flow over a gravel bed. Journal of Hydraulic Research 60 (2), pp.205-219. (10.1080/00221686.2021.1908437)
Xie, Z. and Lin, P. 2022. Eulerian and Lagrangian transport by shallow-water breaking waves. Physics of Fluids 34 (3) 32116. (10.1063/5.0086434)
Xie, Z. , Lin, P. and Stoesser, T. 2022. A conservative and consistent implicit Cartesian cut-cell method for moving geometries with reduced spurious pressure oscillations. Journal of Computational Physics 459 111124. (10.1016/j.jcp.2022.111124)
Yan, J. et al., 2022. Real-time topology optimization based on convolutional neural network by using retrain skill. Presented at: UK Association for Computational Mechanics 2022 Conference Nottingham, England 21-22 April 2022.
Yan, J. et al., 2022. Deep learning driven real time topology optimisation based on initial stress learning. Advanced Engineering Informatics 51 101472. (10.1016/j.aei.2021.101472)
Yan, M. et al., 2022. Projection method for blockchain-enabled non-iterative decentralized management in integrated natural gas-electric systems and its application in digital twin modelling. Applied Energy 311 118645. (10.1016/j.apenergy.2022.118645)
Yan, Z. et al., 2022. A new method of predicting the energy consumption of additive manufacturing considering the component working state. Sustainability 14 (7) 3757. (10.3390/su14073757)
Yang, F. et al., 2022. Study of drain injected breakdown mechanisms in AlGaN/GaN-on-SiC HEMTs. IEEE Transactions on Electron Devices 69 (2), pp.525-530. (10.1109/TED.2021.3138841)
Yang, J. et al. 2022. Review of human-machine interaction towards industry 5.0: human-centric smart manufacturing. Presented at: International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC-CIE 2022) St. Louis, MO, USA 14-17 August 2022.
Yang, P. 2022. Accurate characterisation and modelling of SiC MOSFETs for transient simulation. PhD Thesis , Cardiff University.
Yang, P. et al. 2022. Hybrid data-driven modelling methodology for fast and accurate transient simulation of SiC MOSFETs. IEEE Transactions on Power Electronics 37 (1), pp.440-451. (10.1109/TPEL.2021.3101713)
Yang, P. et al. 2022. SiC-based improved neutral legs with reduced capacitors for three-phase four-wire EV chargers. IEEE Transactions on Transportation Electrification 8 (2), pp.2565-2582. (10.1109/TTE.2021.3138333)
You, Y. et al. 2022. Advances of digital twins for predictive maintenance. Presented at: 3rd International Conference on Industry 4.0 and Smart Manufacturing (ISM 2021) Linz, Austria 17-19 November 2021. Vol. 200.Procedia Computer Science, Vol 200: , pp.1471-1480. (10.1016/j.procs.2022.01.348)
Yu, P. , Bordas, S. P. A. and Kerfriden, P. 2022. Adaptive Isogeometric analysis for transient dynamics: Space-time refinement based on hierarchical a-posteriori error estimations. Computer Methods in Applied Mechanics and Engineering 394 114774. (10.1016/j.cma.2022.114774)
Yu, Z. et al., 2022. Multi-indicators decision for product design solutions: a TOPSIS-MOGA integrated model. Processes 10 (2) 303. (10.3390/pr10020303)
Zaraki, A. et al. 2022. Developing a leader-follower kinematic-based control system for a cable-driven hyper-redundant serial manipulator. Presented at: 2nd IMA Conference on Mathematics of Robotics Manchester, UK 9-11 Sept 2020. IMA Conference on Mathematics of Robotics. Vol. 21.Springer Proceedings in Advanced Robotics Springer. , pp.1-12. (10.1007/978-3-030-91352-6_1)
Zhang, L. et al., 2022. Coordinated optimization of emergency power vehicles and distribution network reconfiguration considering the uncertain restoration capability of e-taxis. IEEE Transactions on Industry Applications 58 (2), pp.2707-2717. (10.1109/TIA.2021.3137132)
Zhang, L. et al., 2022. Voltage control method based on three-phase four-wire sensitivity for hybrid AC/DC low-voltage distribution networks with high-penetration PVs. IET Renewable Power Generation 16 (4), pp.700-712. (10.1049/rpg2.12350)
Zhang, S. et al., 2022. A hybrid modular interline current flow controller for meshed HVDC grids. IEEE Transactions on Industrial Electronics
Zhang, T. et al. 2022. Dynamic energy flow analysis of integrated gas and electricity systems using the holomorphic embedding method. Applied Energy 309 118345. (10.1016/j.apenergy.2021.118345)
Zhao, K. et al. 2022. Digital twin-driven estimation of state of charge for Li-ion battery. Presented at: IEEE International Energy Conference (ENERGYCON 2022) Riga, Latvia 09-12 May 2022.
Zhao, P. et al., 2022. Cyber-resilient multi-energy management for complex systems. IEEE Transactions on Industrial Informatics 18 (3), pp.2144-2159. (10.1109/TII.2021.3097760)
Zhao, Y. et al., 2022. Communication-efficient federated learning for digital twin systems of industrial internet of things. Presented at: 14th IFAC Workshop on Intelligent Manufacturing Systems (IMS 2022) Tel-Aviv, Israel 28-30 March 2022. IFAC-PapersOnLine. Vol. 55(2).Elsevier. , pp.433-438. (10.1016/j.ifacol.2022.04.232)
Zheng, Y. et al., 2022. Prediction of remaining useful life using fused deep learning models - a case study of turbofan engines. Journal of Computing and Information Science in Engineering 22 (5) 54501. (10.1115/1.4054090)
Zhong, C. et al., 2022. A hybrid success history-based adaptive differential evolution and manta ray foraging optimization for multi-objective truss optimization problems. Presented at: 2022 Annual Conference of the UK Association for Computational Mechanics (UKACM) Nottingham, England 20-22 April 2022.
Zhu, X. et al., 2022. Automated qualitative rule extraction based on bidirectional long shortterm memory model. Presented at: 29th EG-ICE International Workshop on Intelligent Computing in Engineering 2022 Aarhus, Denmark 06-08 July 2022.
Zitouni, S. et al. 2022. Lewis number effects on lean premixed combustion characteristics of multi-component fuel blends. Combustion and Flame 238 111932. (10.1016/j.combustflame.2021.111932)

Cyhoeddiadau

Yr Ysgol Peirianneg

Ein lleoliad

Cysylltu â ni

Dyfarniad Athena Swan