Publications
Explore our publications to find out about our internationally recognised research which is creating an impact across the world.
Many of our researchers make their full text freely available to view and share, to support the free exchange of knowledge and ideas.
- Chong, C. T. et al., 2020. Pool fire burning characteristics of biodiesel. Fire Technology (10.1007/s10694-020-00949-3)
- Crane, R. A. , Sapsford, D. J. and Aderibigbe, A. 2020. Applications of engineered nanomaterials in the recovery of metals from wastewater. In: Macaskie, L. E. , Sapsford, D. J. and Mayes, W. M. eds. Resource Recovery from Wastes: Towards a Circular Economy. , pp.266-286. (10.1039/9781788016353-00266)
- Deist, T. M. et al., 2020. Distributed learning on 20 000+ lung cancer patients - The Personal Health Train. Radiotherapy and Oncology 144 , pp.189-200. 10.1016/j.radonc.2019.11.019. (10.1016/j.radonc.2019.11.019)
- Delgado, J. M. D. et al., 2020. Augmented and virtual reality in construction: Drivers and limitations for industry adoption. Journal of Construction Engineering and Management
- Fang, K. et al., 2020. Development and validation of a two-layer Boussinesq model for simulating free surface waves generated by bottom motion. Applied Ocean Research 94 101977. (10.1016/j.apor.2019.101977)
- Folli, A. et al. 2020. A novel dual mode X-band EPR resonator for rapid in situ microwave heating. Journal of Magnetic Resonance 310 106644. (10.1016/j.jmr.2019.106644)
- Gretsch, F. et al., 2020. Fat navigators and Moiré phase tracking comparison for motion estimation and retrospective correction. Magnetic Resonance in Medicine 83 (1)(10.1002/mrm.27908)
- Hamzah, H. , Abduljabar, A. A. and Porch, A. 2020. High Q microwave microfluidic sensor using a central gap ring resonator. IEEE Transactions on Microwave Theory and Techniques , pp.1-9. (10.1109/TMTT.2019.2959757)
- Jiang, Z. et al., 2020. A data-driven based decomposition?integration method for remanufacturing cost prediction of end-of-life products. Robotics and Computer-Integrated Manufacturing 61 , pp.101838. (10.1016/j.rcim.2019.101838)
- Kuster, C. , Hippolyte, J. and Rezgui, Y. 2020. The UDSA ontology: An ontology to support real time urban sustainability assessment. Advances in Engineering Software 140 , pp.-. 102731. (10.1016/j.advengsoft.2019.102731)
- Li, G. et al. 2020. Power reversal strategies for hybrid LCC/MMC HVDC systems. CSEE Journal of Power and Energy Systems , pp.-.
- Li, J. et al. 2020. Formation of polarised, functional artificial cells from compartmentalised droplet networks and nanomaterials, using one-step, dual-material 3D-printed microfluidics. Advanced Science 7 (1) 1901719. (10.1002/advs.201901719)
- Li, Y. et al., 2020. Development of an adaptation table to enhance the accuracy of the predicted mean vote model. Building and Environment 168 106504. (10.1016/j.buildenv.2019.106504)
- Li, Y. , Rezgui, Y. and Kubicki, S. 2020. An intelligent semantic system for real-time demand response management of a thermal grid. Sustainable Cities and Society 52 101857. (10.1016/j.scs.2019.101857)
- Lu, Y. et al., 2020. Digital twin-driven smart manufacturing: Connotation, reference model, applications and research issues. Robotics and Computer-Integrated Manufacturing 61 101837. (10.1016/j.rcim.2019.101837)
- Meng, Q. et al. 2020. Change-point multivariable quantile regression to explore effect of weather variables on building energy consumption and estimate base temperature range. Sustainable Cities and Society 53 101900. (10.1016/j.scs.2019.101900)
- Morini, L. et al. 2020. On the universality of the frequency spectrum and band-gap optimisation of quasicrystalline-generated structured rods. Philosophical Transactions A: Mathematical, Physical and Engineering Sciences 378 (2162) 20190240. (10.1098/rsta.2019.0240)
- Noorikalkhoran, O. and Gei, M. 2020. Evaluation of neutron radiation damage in zircaloy fuel clad of nuclear power plants: A study based on PKA and dpa calculations. Progress in Nuclear Energy 118 103079. (10.1016/j.pnucene.2019.103079)
- Obaid, Z. A. et al., 2020. Control of a population of battery energy storage systems for frequency response. International Journal of Electrical Power and Energy Systems 115 105463. (10.1016/j.ijepes.2019.105463)
- Ouro, P. , Juez, C. and Franca, M. 2020. Drivers for mass and momentum exchange between the main channel and river bank lateral cavities. Advances in Water Resources 137 103511. (10.1016/j.advwatres.2020.103511)
- Petri, I. and Rezgui, Y. 2020. BIM for energy efficiency - Decarbonising the built environment through informed decision-making using digital simulation and analysis. St Albans: IHS Press.
- Porter, K. et al., 2020. Flume testing of passively adaptive composite tidal turbine blades under combined wave and current loading. Journal of Fluids and Structures 93 102825. (10.1016/j.jfluidstructs.2019.102825)
- Quaglia, R. et al. 2020. Source/load-pull characterisation of GaN on Si HEMTs with data analysis targeting doherty design. Presented at: Radio and Wireless Week 2020 San Antonio, Texas, USA 26-29 January 2020. , pp.-.
- Sapsford, D. J. , Crane, R. A. and Sinnett, D. 2020. An exploration of key concepts in application of in situ processes for recovery of resources from high-volume industrial and mine wastes. In: Macaskie, L. E. , Sapsford, D. J. and Mayes, W. M. eds. Resource Recovery from Wastes: Towards a Circular Economy. , pp.141-167. (10.1039/9781788016353-00141)
- Sreedharan, S. et al., 2020. Power system loading margin enhancement by optimal STATCOM integration - a case study. Computers and Electrical Engineering 81 106521. (10.1016/j.compeleceng.2019.106521)
- Srivastava, P. et al., 2020. Performance assessment of evapotranspiration estimated from different data sources over agricultural landscape in Northern India. Theoretical and Applied Climatology (10.1007/s00704-019-03076-4)
- Surleraux, A. et al. 2020. Machine learning based reverse modelling approach for rapid tool shape optimization in die-sinking μEDM. Journal of Computing and Information Science in Engineering (10.1115/1.4045956)
- Valera Medina, A. and Roldan, A. 2020. Ammonia from steelworks. In: Sustainable Ammonia Production. Green Energy and Technology Springer. , pp.69-80. (10.1007/978-3-030-35106-9_4)
- Vigueras Zuniga, M. et al., 2020. Numerical predictions of a swirl combustor using complex chemistry fueled with ammonia/hydrogen blends. Energies 13 (2) 288. (10.3390/en13020288)
- Wang, X. et al. 2020. Superior activity of iron-manganese supported on kaolin for NO abatement at low temperature. Journal of Environmental Sciences 88 , pp.237-247. (10.1016/j.jes.2019.08.017)
- Xie, Z. et al. 2020. A control volume finite element method for three-dimensional three?phase flows. International Journal for Numerical Methods in Fluids (10.1002/fld.4805)
- Yang, R. et al., 2020. Autonomous synchronizing and frequency response control of multi-terminal DC systems with wind farm integration. IEEE Transactions on Sustainable Energy , pp.-. (10.1109/TSTE.2020.2964145)
- Zwanenburg, A. et al., 2020. The Image Biomarker Standardization Initiative: standardized quantitative radiomics for high throughput image-based phenotyping. Radiology
