Ewch i’r prif gynnwys
Dr Samuel Bigot PhD, MEng

Dr Samuel Bigot

PhD, MEng

Senior Lecturer - Teaching and Research

Yr Ysgol Peirianneg

Email:
bigots@cardiff.ac.uk
Telephone:
+44 (0)29 2087 5946
Location:
W/2.21, W/2.21
Ar gael fel goruchwyliwr ôl-raddedig

Since the beginning of my academic career, I have been focusing my research on innovative and emerging manufacturing technologies and in particular machine learning, micro manufacturing and 3D printing, combining them when relevant.

This highlights a particular aspect of my research activities. The machine learning techniques I am developing can be seen as enabling-technologies that can be used for modelling and knowledge discovery in other research fields, but in particular in my main other area of interest, micro manufacturing.

At the same time, the micro manufacturing process chains I am developing also act as enabling-technologies for other field of research, such as for the development of novel medical devices or in thermo-fluidic applications.

More recently, I have also been looking at how to integrate emerging 3D printing techniques into more advanced and reliable manufacturing process chains, such as through the post processing of metal ALM components using laser ablation or through the development of novel material for 3D printing

This wide range of activities is reflected by the range of joint publications I contributed to and by the range of co-authors coming from various research disciplines that I worked with on various interdisciplinary project, both as coordinator and as co-investigator. These projects covered different aspects of technologies development from fundamental research to technology transfer and networking activities.

Aelodaethau proffesiynol

Received, from the Society of Manufacturing Engineers (USA), the 2007 SME Kuo K. Wang Outstanding Young Manufacturing Engineer Award.

Received a fellowship funded by the Research Councils of the United Kingdom to conduct research in Innovative Manufacturing.

Member of the Conference committee of the International Conference on Management of Innovative Technologie MIT, Slovenia.

Reviewer for international journals and conferences, in particular:

  • Journal of Systems and Control Engineering
  • Journal of Engineering Manufacture
  • Multi-Material Micro Manufacture (4M) Network conferences

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

  • Bigot, S., Popov, K. B. and Ivanov, A. 2005. A study of the micro EDM electrode wear. Presented at: 4M 2005: 1st International Conference on Multi-Material Micro Manufacture, Forschungszentrum Karlsruhe, Karlsruhe, Germany, 29 June - 1 July 2005 Presented at Menz, W. and Dimov, S. S. eds.Proceedings: 4M 2005: 1st International Conference on Multi-Material Micro Manufacture. Amsterdam: Elsevier
  • Pham, D. T.et al. 2005. Micro-EDM drilling: accuracy study, advances in integrated design and manufacturing in mechanical engineering. In: Bramley, A. et al. eds. Advances in Integrated Design and Manufacturing in Mechanical Engineering.. Dordrecht: Springer, pp. 281-294.
  • Pham, D. T.et al. 2005. Micro EDM drilling: Accuracy study. Presented at: 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Bath, UK, 5- 7 April 2004 Presented at Bramley, A. et al. eds.Advances in Integrated Design and Manufacturing in Mechanical Engineering. Springer pp. 281-294.

2004

2003

2002

  • Pham, D. T., Dimov, S. S. and Bigot, S. 2002. A new pruning technique for inductive learning. Presented at: Proceedings of the 3rd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering(ICME 2002), Ischia, Italy. pp. 449-454.

Contracts

TitlePeopleSponsorValueDuration
Access to nanoscience and nanotechnology equipment at CardiffHutchings GJ, Bigot S, Bowker M, Brousseau E, Karihaloo BL, MacDonald JEEngineering and Physical Sciences Research Council26928501/10/2008 - 30/09/2012
Astute - Advanced Sustainable Manufacturing TechnologyNaim M (CARBS), Setchi R, Bigot S, Brousseau E, Prickett P, Davies A, Bowen P, Packianather M, Grosvenor RI (with CARBS)WEFO190311701/05/2010 - 30/04/2015
Thermal contact resistance modelling for polymer processingBigot SEPSRC via Bradford University13233601/04/2011 - 31/03/2014
An advanced modelling approach for micro EDM wear analysisBigot SEPSRC9642601/03/2012 - 28/02/2013
Visiting Fellowship - Prof IH WittenBigot SRoyal Academy of Engineering440221/04/2012 - 20/05/2012
RCUK FellowshipsBigot SEngineering and Physical Sciences Research Council10219601/06/2005 - 31/05/2010
Upgrading the small equipment base for early career researchers in the Engineering and Physical SciencesHolford K, Whatling G, Lees J, Anderson P I, Brousseau E, Cipcigan L M, Pullin R, Bigot S, Theobald P, Simpson R N, Kawashita L F, Clarke AEPSRC49832601/11/2012 - 31/03/2013
Converging technologies for micro systems manufacturing - COTECHPrickett PW, Bigot SCommission of European Communities24511801/10/2008 - 30/09/2012
An advanced modelling approach for micro EDM wear analysisBigot S,EPSRC9642601/03/2012 - 28/02/2013
IMPRESS - Flexible Compression Injection Moulding Platform for Multi-Scale Surface StructuresBigot S, Lacan FACommission of European Communities27192701/05/2010 - 30/04/2013
 Bigot S, Setchi RA4B14837901/04/2014 - 31/12/2014
ECO-Laserfact-EC)-efficient LASER technology FACTories of the futureBigot S, Setchi RM, Brousseau E, Petkov P, Barrow DEuropean Commission12309101/05/2012 - 30/04/2015

Supervised Students

TitleStudentStatusDegree
Numerical Simulation And Optimisation Of Micro-EDM Using Geometrical Methods And Machine LearningSURLERAUX Anthony BenoitGraduatePhD
A Novel Rule Induction Algorithm With Improved Handling Of Contuinuous Valued AttributesPHAM Dinh TrungGraduatePhD
Grid Method Studies of the Geometrical Uncertainties in Free Form and Micro ProcessesMINEV EkaterinGraduatePhD
Machine Scheduling Using The Bees AlgorithmPHRUEKSANANT JanyaratGraduatePhD
AN EXPERIMENTAL AND MODELLING STUDY OF GAS TURBINE FUEL INJECTOR OPTIMISATIONALFAHHAM Mohammed Abdulridha HusseinCurrentPhD
Operational Research MethodsJONES RachelCurrentEngD
  • Advanced Manufacturing
  • Micro Manufacturing (Laser Ablation, micro EDM, modelling/simulation)
  • Additive Layer Manufacturing/3D Printing
  • Machine learning/Artificial Intelligence applied to manufacturing