Dr Yiqin Xue

2024

• Habil, M., Anayi, F., Xue, Y. and Shouran, M. 2024. Optimisation of sliding mode parameters using different algorithms to control the position of a linear DC motor. Presented at: International Conference on Advance Computing and Ingenious Technology in Engineering Science 2024, 30-31 December 2021Proceedings of International Conference on Advance Computing and Ingenious Technology in Engineering Science, Vol. 2816. Vol. 1. AIP, (10.1063/5.0179462)

2023

• Habil, M., Anayi, F., Xue, Y. and Alnagasa, K. 2023. Analyzing the design and performance of a DC linear stepper motor. Machines 11(8), article number: 785. (10.3390/machines11080785)

2020

• Alamili, A., Xue, Y. and Anayi, F. 2020. Laboratory-based examination of the effect of rotational inertia on energy recuperation in the regenerative braking process. Presented at: 4th Annual CDT Conference in Energy Storage and Its Applications, Southampton, UK, 9-10 July 2019 Presented at Cruden, A. ed.4th Annual CDT Conference in Energy Storage and Its Applications, Vol. 6 (5). Vol. Supple. Elsevier pp. 43-52., (10.1016/j.egyr.2020.02.026)

2019

• Al-Zughaibi, A., Xue, Y., Grosvenor, R. and Okon, A. 2019. Design and investigation of PA controller for driving nonlinear electro hydraulic actuator with new active suspension system model. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 233(13), pp. 3460-3479. (10.1177/0954407018822254)
• Al-Zughaibi, A., Xue, Y. and Grosvenor, R. 2019. A new insight into modelling passive suspension real test rig system with consideration of nonlinear friction forces. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 233(8), pp. 2257-2266. (10.1177/0954407018764942)
• Alamili, A., Xue, Y. and Anayi, F. 2019. An experimental and analytical study of the ultra-capacitor storage unit used in regenerative braking systems. Energy Procedia 159, pp. 376-381. (10.1016/j.egypro.2018.12.073)

2017

• Okon, A., Valera Medina, A., Kurji, H. and Xue, Y. 2017. Acoustic dynamics of a swirl premixed combustor with different operating conditions. Energy Procedia 142, pp. 1674-1679. (10.1016/j.egypro.2017.12.548)

2016

• Okon, A., Kurji, H., Valera Medina, A. and Xue, Y. 2016. Heat release rate and pressure fluctuations of a lean premixed flame at different forcing levels. Presented at: The International Conference for Students on Applied Engineering, Newcastle upon Tyne, UK, 20-21 October 2016 Presented at Al-Shibaany, Z. Y. A. and Hameed, A. F. eds.2016 International Conference for Students on Applied Engineering (ICSAE) Proceedings. Piscataway, NJ: IEEE pp. 232-236., (10.1109/ICSAE.2016.7810194)

2011

• Zhu, H., Wang, Z. B., Yang, M., Xue, Y., Qiu, R. and Ji, C. 2011. Size-dependent mechanical properties of nano-cellular materials. Presented at: 3M-NANO International Conference, Changchun, China, 26 August - 2 September 2011.

2010

• Davies, D. L., Xue, Y., Watton, J. and Williams, G. A. 2010. Comparison between experimental and computer modelling results for a pneumatic/hydraulic hybrid cylinder. Presented at: IEEE International Conference on Mechatronics and Automation, Xi'an, China, 4-7 August 2010International Conference on Mechatronics and Automation (ICMA 2010, Xi'an, China). Piscataway, NJ: Institute of Electrical and Electronics Engineers ( IEEE ) pp. 2004-2008., (10.1109/ICMA.2010.5589197)
• Carruthers-Watt, B. N., Xue, Y. and Morris, A. J. 2010. A vision based system for strip tracking measurement in the finishing train of a hot strip mill. Presented at: IEEE International Conference on Mechatronics and Automation, Xi'an, China, 4-7 August 2010The 2010 IEEE International Conference on Mechatronics and Automation (August 4-7, 2010, Xi'an, China). Piscataway, NJ: IEEE pp. 1115-1120., (10.1109/ICMA.2010.5589402)
• Xue, Y. and Lewis, J. P. 2010. Consideration of control edge geometry to power steering characteristics. Presented at: IEEE International Conference on Mechatronics and Automation, Xi'an, China, 4-7 August 2010ICMA 2010 2010 IEEE International Conference on Mechatronics and Automation: August 4-7, 2010, Xi'an, China. Piscataway, NJ: IEEE pp. 583-588., (10.1109/ICMA.2010.5588374)

2009

• Davies, D. L., Watton, J., Xue, Y. and Williams, G. 2009. Experimental investigation into improved wrapper control of hot strip steel rolling mill downcoilers. Presented at: 2009 ASME Dynamic Systems and Control Conference, Hollywood, California, USA.
• Davies, D. L. I., Watton, J., Xue, Y. and Williams, G. 2009. Mechanical design improvement to hot mill downcoiler. Presented at: 5th European Rolling Conference (ERC5), London, UK.
• Bergada, J. M., Davies, D. L. I., Xue, Y. and Kumar, S. 2009. Experimental investigation in axial piston pumps barrel dynamics. Presented at: 10th International Conference on fluid control, measurements and visualisation (FLUCOME), Moscow, Russia.

2008

• Zhu, Y. and Xue, Y. 2008. Modelling and simulation of variable displacement hydraulic pumps. Machine Tool and Hydraulics 36(9), pp. 263-267.

2006

• Xue, Y., Syred, N., Rodriguez-Martinez, V. and O'Doherty, T. 2006. Dynamic modelling of low frequency oscillation in a swirl burned system using artificial neural networks. Journal of the Energy Institute 79(4), pp. 232-240.

2005

• Xue, Y. and Watton, J. 2005. Modelling of a hydraulic power steering system. International Journal of Vehicle Design 38(2/3), pp. 162-178. (10.1504/IJVD.2005.007290)
• Xue, Y., Qin, Y. and Syred, N. 2005. Controller prediction using artificial neural networks. Presented at: 4th Conference on Applied Cybernetics, London, UK. pp. 100-104.
• Xue, Y. and Yosup, M. Y. 2005. Time domain simulation of air transmission lines. Presented at: 8th International Symposium on Fluid Control, Measurement and Visualisation (FLUCOME), Chengdu, China. Vol. 277.

2004

• Xue, Y. 2004. Control of a time-delay system using network prediction and gain scheduling method. Presented at: 6th International Conference on Frontiers of Design and Manufacturing, Xi'an, China.
• Xue, Y., Yusop, M. J. and Ji, X. 2004. Energy saving in pneumatic actuation using the gas law prediction. Presented at: Bath Workshop on Power Transmission and Motion Control (5th:2003), Bath, UK, 10-12 September 2003 Presented at Burrows, C. R. and Edge, K. A. eds.Bath Workshop on Power Transmission and Motion Control: PTMC 2003, Vol. 1. London: Professional Engineering Publishing pp. 319-331.

2003

• Xue, Y., Syred, N., Rodriguez-Martinez, V. M. and O'Doherty, T. 2003. Dynamic modelling of a swirl burner using artificial neural networks. Presented at: Proceedings Combustion and Noise Control Symposium, Cranfield, UK. Cranfield University Press

2002

• Xue, Y. and Watton, J. 2002. Position control of a pneumatic servo-actuator with time-delay using a neural network predictor. Presented at: The 5th JFPS International Symposium on Fluid Power, Nara, Japan. pp. 637-642.
• Xue, Y. and Watton, J. 2002. Issues on motion control using visual feedback. Presented at: Institution of Mechanical Engineers (IMechE) seminar: Recent Developments in Control Techniques for Actuators, London, UK, 9 December 2002Proceedings of Recent Development in Control Techniques for Actuators, London, UK, 9 December 2002. London: Institution of Mechanical Engineers
• Xue, Y. and Watton, J. 2002. Neutral prediction in control of time-delay systems. Presented at: Institution of Mechanical Engineers (IMechE) seminar: Recent Developments in Control Techniques for Actuators, London, UK, 9 December 2002Proceedings of Recent Development in Control Techniques for Actuators, London, UK, 9 December 2002. London: Institution of Mechanical Engineers