Rhosslyn Adams

Articles

• Adams, R., Soe, S. and Theobald, P. 2023. Optimisation of an elastomeric pre-buckled honeycomb helmet liner for advanced impact mitigation. Smart Materials and Structures 32(9), article number: 95012. (10.1088/1361-665x/ace94b)
• Adams, R., Townsend, S., Soe, S. and Theobald, P. 2022. Mechanical behaviour of additively manufactured elastomeric pre-buckled honeycombs under quasi-static and impact loading. Materials & Design 213, article number: 110368. (10.1016/j.matdes.2021.110368)
• Adams, R., Townsend, S., Soe, S. and Theobald, P. 2022. Finite element-based optimisation of an elastomeric honeycomb for impact mitigation in helmet liners. International Journal of Mechanical Sciences 214, article number: 106920. (10.1016/j.ijmecsci.2021.106920)
• Hanna, B., Adams, R., Townsend, S., Robinson, M., Soe, S., Stewart, M. and Theobald, P. 2021. Auxetic metamaterial optimisation for head impact mitigation in American football. International Journal of Impact Engineering 157, article number: 103991. (10.1016/j.ijimpeng.2021.103991)
• Soe, S., Adams, R., Hossain, M. and Theobald, P. 2021. Investigating the dynamic compression response of elastomeric, additively manufactured fluid-filled structures via experimental and finite element analyses. Additive Manufacturing 39, article number: 101885. (10.1016/j.addma.2021.101885)
• Townsend, S., Adams, R., Robinson, M., Hanna, B. and Theobald, P. 2020. 3D printed origami honeycombs with tailored out-of-plane energy absorption behavior. Materials & Design 195, article number: 108930. (10.1016/j.matdes.2020.108930)
• Adams, R. et al. 2019. A novel pathway for efficient characterisation of additively manufactured thermoplastic elastomers. Materials and Design 180, article number: 107917. (10.1016/j.matdes.2019.107917)
• Robinson, M. et al. 2019. Mechanical characterisation of additively manufactured elastomeric structures for variable strain rate applications. Additive Manufacturing 27, pp. -. (10.1016/j.addma.2019.03.022)

Thesis

• Rhosslyn, A. 2022. On a finite element based approach to the design and optimisation of elastomeric additively manufactured cellular structures for impact mitigation in helmets. PhD Thesis, Cardiff University.

Conferences

• Soe, S., Robinson, M., Giasin, K., Adams, R., Palkowski, T. and Theobald, P. 2020. Using FFF and topology optimisation to increase crushing strength in equestrian helmets. Presented at: 7th International Conference on Sustainable Design and Manufacturing KES-SDM 2020, Virtual, 9-11 Sept 2020 Presented at Scholz, S. G., Howlett, R. J. and Setchi, R. eds.Sustainable Design and Manufacturing 2020, Vol. 200. Springer pp. 369-377., (10.1007/978-981-15-8131-1_33)