Dr Fatih Anayi

2020

• Al-Musawi, A. K., Anayi, F. and Packianather, M. 2020. Three-phase induction motor fault detection based on thermal image segmentation. Infrared Physics and Technology 104, article number: 103140. (10.1016/j.infrared.2019.103140)

2019

• Packianather, M. S., Al-Musawi, A. K. and Anayi, F. 2019. Bee for mining (B4M) - a novel rule discovery method using the Bees algorithm with quality-weight and coverage-weight. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233(14), pp. 5101-5112. (10.1177/0954406219833719)
• Alamili, A., Xue, Y. and Anayi, F. 2019. An experimental and analytical study of the ultra-capacitor storage unit used in regenerative braking systems. Energy Procedia 159, pp. 376-381. (10.1016/j.egypro.2018.12.073)

2016

• Eldieb, A. and Anayi, F. 2016. Evaluation of loss generated by edge burrs in electrical steels. IEEE Transactions on Magnetics 52(5), article number: 2001404. (10.1109/TMAG.2016.2527361)
• Etumi, A. A. A. and Anayi, F. J. 2016. The application of correlation technique in detecting internal and external faults in three-phase transformer and saturation of current transformer. IEEE Transactions on Power Delivery 31(5), pp. 2131-2139. (10.1109/TPWRD.2016.2572608)
• Ismael, A. and Anayi, F. J. 2016. Modelling of a prototype brushless permanent magnet DC linear stepping motor employing a flat-armature winding configuration. Presented at: 3rd International Conference on Electrical, Electronics, Computer Engineering and their Applications (EECEA 2016), Beirut, Lebanon, 21-23 April 20162016 Third International Conference on Electrical, Electronics, Computer Engineering and their Applications (EECEA 2016). Institute of Electrical and Electronics Engineers (IEEE) pp. 88-93., (10.1109/EECEA.2016.7470771)

2015

• Eldieb, A., Anayi, F. and Fahmy, A. 2015. Experimental investigation on effect of edge burrs fault on toroidal magnetic cores laminations at different range of magnetisations. Presented at: Power Engineering Conference (UPEC), 2015 50th International Universities, Stoke-on-Trent, UK, 1-4 Sept. 2015Power Engineering Conference (UPEC), 2015 50th International Universities. IEEE pp. 1-5.
• Eldieb, A., Anayi, F. and Fahmy, A. 2015. Investigation of short-circuit fault effects on non-oriented steel at different range of magnetisations. Presented at: Power Engineering Conference (UPEC), 2015 50th International Universities, Stoke-on-Trent, UK, 1-4 Sept. 2015Power Engineering Conference (UPEC), 2015 50th International Universities. IEEE pp. 1-6.

2013

• Hamzehbahmani, H., Moses, A. J. and Anayi, F. J. 2013. Opportunities and precautions in measurement of power loss in electrical steel laminations using the initial rate of rise of temperature method. IEEE Transactions on Magnetics 49(3), pp. 1264-1273. (10.1109/TMAG.2012.2227274)

2012

• Mazurek, R.et al. 2012. Effect of Artificial Burrs on Local Power Loss in a Three-Phase Transformer Core. IEEE Transactions on Magnetics 48(4), pp. 1653-1656. (10.1109/TMAG.2011.2173668)

2009

• Nlebedim, C. I.et al. 2009. Influence of vacuum sintering on microstructure and magnetic properties of magnetostrictive cobalt ferrite. Journal of Magnetism and Magnetic Materials 321(17), pp. 2528-2532. (10.1016/j.jmmm.2009.03.021)
• Yao, X.et al. 2009. Rotating flux and rotational loss within laminations at T-joint of a 3-phase transformer under PWM voltage excitation. Presented at: IEEE International Magnetics Conference (Intermag 09), Sacramento, USA. Vol. FT-06.
• Nlebedim, I.et al. 2009. Effect of heat treatment on the cation distribution of magnetorestrictive ceramic CoFe2O4. Presented at: 8th Pacific Rim Conference on Ceramic and Glass Technology, Vancouver, Canada. Vol. 572435.

2008

• Zurek, S.et al. 2008. Prediction of power loss and permeability with the use of an artificial neural network in wound toroidal cores. Journal of Magnetism and Magnetic Materials 320(20), pp. e1001-e1005. (10.1016/j.jmmm.2008.04.177)
• Deshmukh, R., Moses, A. J. and Anayi, F. J. 2008. The Chording Effect on Core Losses of Three-Phase Induction Motor Under Sinusoidal and PWM Voltage Supplies. Journal of Magnetism and Magnetic Materials 320(20), pp. e907-910. (10.1016/j.jmmm.2008.04.066)
• Ranvah, N.et al. 2008. Temperature Dependence of Magnetostriction of Co1+xGexFe2-2xO4 Magnetostrictive Sensor and Actuator Applications. IEEE Transactions on Magnetics 44(11), pp. 3013-16. (10.1109/TMAG.2008.2004535)
• Yao, X. G.et al. 2008. Magneto-Mechanical Resonance in a Model 3-Phase 3-Limb Transformer Core Under Sinusoidal and PWM Voltage Excitation. IEEE Transactions on Magnetics 44(11), pp. 4111-4114. (10.1109/TMAG.2008.2002790)
• Nlebedim, I.et al. 2008. Enhancement of magnetoelastic properties of highly magnetostrictive cobalt ferrite through control of sintering conditions. Presented at: IEEE International Magentics Conference (InterMag), Madrid, Spain, Vol. EW07. pp. 997.
• Huang, M. C., Moses, A. J. and Anayi, F. J. 2008. Shaft position correction scheme comparison for sensorless control of a PMSM based on state-space estimation between variance adjustment and angle PI regulation. Presented at: IEEE Industry Applications Society Annual Meeting 2008 (IAS 08), Edmonton, Canada. pp. 1-8.
• Yao, X.et al. 2008. Rotating flux and rotational loss within laminations at T-joint of a 3-phase transformer under PWM voltage excitation. Presented at: 53rd Annual Magnetic Conference, Austin, USA. Vol. GV-11. pp. 221.
• Yao, X. G.et al. 2008. Magneto-mechanical resonance in a model 3-phase 3-limb transformer core under sinusoidal and PWM voltage excitation. Presented at: Intermag Europe 2008, Madrid, Spain. Vol. AG 10. pp. 83.

2007

• Yao, X., Moses, A. J. and Anayi, F. J. 2007. Normal flux distribution in a three-phase transformer core under sinusoidal and PWM excitation. IEEE Transactions on Magnetics 43(6), pp. 2660-2662. (10.1109/TMAG.2007.893782)
• Yao, X. G.et al. 2007. Influence of switching frequency on eddy-current losses in a three-limb transformer core subjected to PWM voltage excitation. Presented at: International Conference on Power Engineering, Energy and Electrical Drives (POWERENG 2007), Setubal, Portugal. pp. 324-329.
• Deshmuskh, R., Moses, A. J. and Anayi, F. J. 2007. The chording effect on no-load losses of three-phase induction motor under sinusoidal and PWM voltage supplies. Presented at: Soft Magnetic Materials conference (SMM18), Cardiff, UK. Vol. H-010. pp. 287.
• Sagarduy, J., Moses, A. J. and Anayi, F. J. 2007. Effect of AC-AC conversion topology on separation of losses in Si-Fe steel. Presented at: 10th Joint MMM/Intermag conference, Baltimore, USA. Vol. DP-07.
• Zurek, S.et al. 2007. Neural networks for prediction of power loss and permeability in wound toroidal cores. Presented at: 18th Soft Magnetic Materials Conference (SMM18), Cardiff, UK. Vol. J-012. pp. 113.

2006

• Huang, M. C.et al. 2006. Shaft Position Correction Scheme Comparison for Sensorless Control PMSM based on Space State-Estimation between α-β Variance Adjustment and d-q Angle PI Regulation. Presented at: 32nd IEEE Annual Conference on Industrial Electronics (IECON 2006), Paris, France, 6-10 November 2006Proceedings of the 32nd IEEE Annual Conference on Industrial Electronics (IECON 2006). Los Alamitos, CA: IEEE pp. 1469-1474., (10.1109/IECON.2006.347399)
• Deshmukh, R., Moses, A. J. and Anayi, F. J. 2006. Behaviour of three-phase induction motors with variable stator coil winding pitch. Journal of Applied Physics 99(08R310)
• Deshmukh, R., Moses, A. J. and Anayi, F. J. 2006. Improvement in performance of short chorded three phase induction motors with variable PWM switching frequency. IEEE Transactions on Magnetics 42(10), pp. 3452-3454.
• Sagarduy, J., Moses, A. J. and Anayi, F. J. 2006. Eddy-current loss in electrical steels subjected to matrix and classical PWM excitation waveforms. IEEE Transactions on Magnetics 42(10), pp. 2818-2820. (10.1109/TMAG.2006.879138)
• Huang, M., Moses, A. J. and Anayi, F. J. 2006. Position calibration techniques comparison for sensorless controlled PMSM. Presented at: International Mag. Conference (Intermag 06) Abstract HV-04, San Diego, USA.
• Huang, M. C., Moses, A. J. and Anayi, F. J. 2006. The comparison of sensorless estimation techniques for PMSM between extended Kalman filter and flux-linkage observer. Presented at: 21st Annual IEEE Applied Power Electronics Conference and Exposition (APEC 2006), Dallas, USA. Vol. 19-Feb. pp. 654-659.
• Huang, M. C.et al. 2006. Position calibration techniques comparison for sensorless controlled PMSM based on variance adjustment and angle regulation. Presented at: 12th International Power Electronics and Motion Control Conference (EPE-PEMC 2006), Portoroz, Slovenia. pp. 1301-1306.
• Huang, M. C.et al. 2006. Two reduced-order stochastic state observer comparison investigation based on LKF and SDL. Presented at: 37th IEEE Power Electronics Specialists Conference (PESC’06), Jeju, Korea. Vol. TuC2-1. pp. 1484-1489.
• Huang, M. C.et al. 2006. Reduced-order Kalman filter (RLKF) theory in application of sensorless control for permanent magnet synchronous motor (PMSM). Presented at: 1st IEEE Conference on Industrial Electronics and Applications (ICIEA 2006), Singapore. Vol. TM6-10. pp. 928-933.
• Moses, A. J.et al. 2006. Additional losses in inverter driven electrical machines. Presented at: Proceedings of Workshop on Metallurgy and Magnetism, Freiberg, Germany.
• Sagarduy, J.et al. 2006. Matrix vs pulse-width-modulation frequency converters: Iron losses under pulsating forms of voltage excitation. Presented at: Proceedings of 37th IEEE power Electronics Conference, Jeju, Korea. Vol. weF 2-. pp. 2247-2252.
• Sagarduy, J.et al. 2006. Iron losses under voltage excitation by novel and classical frequency converters. Presented at: 12th International Power Electronics and Motion Control Conference (EPE-PEMC 2006), Portoroz, Slovenia. pp. 131-136.
• De Eribe, J. S. O.et al. 2006. Computational technique for modelling of frequency converters and analysis of generated waveforms. Presented at: Proceedings 6th International Conference on Electromagnetics (CEM 2006), Aachen, Germany. pp. 171-172.
• Yao, X. G.et al. 2006. Acoustic noise displacement analysis of a 3-phase transformer core under sinusoidal and PWM excitation. Presented at: 17th International Conference on Electrical Machines (ICEM 2006), Chania, Crete. Vol. OTM4-4. pp. 514.
• Deshmukh, R., Moses, A. J. and Anayi, F. J. 2006. Voltage harmonic variation in three phase induction motors with different coil pitches. Journal of Magnetism and Magnetic Materials 304(2), pp. e810-e812. (10.1016/j.jmmm.2006.03.005)

2004

• Moses, A. J.et al. 2004. Efficiency and output waveforms of a 3 phase inverter driving an AC motor at no load. Presented at: 16th Soft Magnetic Materials Conference, Dusseldorf, Germany, Vol. 16. pp. 879-883.

2003

• Anayi, F. J., Moses, A. J. and Jenkins, K. 2003. Effect of aluminium diffusion into electrical steel on power loss under flux distortion conditions. Journal of Magnetism and Magnetic Materials 254-25, pp. 36-38. (10.1016/S0304-8853(02)00744-8)
• Moses, A. J. and Anayi, F. J. 2003. Effect of PWM voltage excitation on iron loss of inverter fed motors. Presented at: Proceedings of the IASTED International Conference on Neural Networks and Computational Intelligence, Cancun, Mexico. pp. 351-354.

2002

• Moses, A. J., Anayi, F. J. and Leicht, J. 2002. Analaysis of magnetic properties of electrical steels in stator cores of inverer fed motors. Presented at: Procedures of 7th International Workshop on 1 and 2 Dimensional Magnetic Measurement and Testing, Ludenschied, Germany, Vol. PTB-E-. pp. 37-45.