School of Engineering

2017 publications

Wu, P. , Li, H. and Wang, X. eds. 2017. Integrated Building Information Modelling. Bentham Science Publishers.
Campana, G. et al., 2017. Sustainable design and manufacturing 2017: Selected papers on sustainable design and manufacturing. Springer. (10.1007/978-3-319-57078-5)
Abd-Rahman, R. et al., 2017. Dynamic modelling of polluted outdoor insulator under wet weather conditions. Presented at: 2016 IEEE International Conference on Power and Energy (PECon) Melaka, Malaysia 28-29 November 2016. 2016 IEEE International Conference on Power and Energy (PECon), Proceedings. IEEE. , pp.610. (10.1109/PECON.2016.7951633)
Abdulabbas Gatea Al-Khafaji, A. 2017. Health monitoring of feedback controlled mechatronic systems. PhD Thesis , Cardiff University.
Abduljabar, A. , Choi, H. and Porch, A. 2017. Dual feeding cavity resonator for efficiency enhancement in liquid heating applications. Electronics letters (10.1049/el.2017.2557)
Abduljabar, A. A. et al., 2017. Dual mode microwave microfluidic sensor for temperature variant liquid characterization. IEEE Transactions on Microwave Theory and Techniques 65 (7), pp.2572 - 2582. (10.1109/TMTT.2016.2647249)
Abed, S. N. , Almuktar, S. A. and Scholz, M. 2017. Remediation of synthetic greywater in mesocosm - Scale floating treatment wetlands. Ecological Engineering 102 , pp.303-319. (10.1016/j.ecoleng.2017.01.043)
Abed, S. N. , Almuktar, S. A. and Scholz, M. 2017. Treatment of contaminated greywater using pelletised mine water sludge. Journal of Environmental Management 197 , pp.10-23. (10.1016/j.jenvman.2017.03.021)
Abeysinghe Herath Mudiyanselage, S. M. , Wu, J. and Sooriyabandara, M. 2017. A statistical assessment tool for electricity distribution networks. Energy Procedia 105 , pp.2595-2600. (10.1016/j.egypro.2017.03.747)
Abhinav, R. et al., 2017. Short-term wind power forecasting using wavelet-based neural network. Energy Procedia 142 , pp.455-460. (10.1016/j.egypro.2017.12.071)
Abu Bakar, A. , Ahmadian, R. and Falconer, R. 2017. Diffuse bacteria loading from intertidal marshland and impacts to adjacent estuarine water quality. Presented at: 37th IAHR World Congress Kuala Lumpur, Malaysia 13-18 August 2017. , pp.-.
Abu-Bakar, A. , Ahmadian, R. and Falconer, R. A. 2017. Modelling the transport and decay processes of microbial tracers released in a macro-tidal estuary. Water Research 123 , pp.802-824. (10.1016/j.watres.2017.07.007)
Adebayo, I. et al., 2017. Doubly excited pulse waves on thin liquid films flowing down an inclined plane: an experimental and numerical study. Physical Review E 96 (1) 13118. (10.1103/PhysRevE.96.013118)
Ahangari, R. , Noorikalkhoran, O. and Sadeghi, N. 2017. Radiological dose assessment for the hypothetical severe accident of the Tehran Research Reactor and corresponding emergency response. Annals of Nuclear Energy 99 , pp.272-278. (10.1016/j.anucene.2016.09.005)
Ahmad, H. 2017. Investigation of electrical properties of field grading materials based ZnO microvaristors. PhD Thesis , Cardiff University.
Ahmad, H. et al. 2017. Characterics of ZnO microvaristors-loaded grading polymeric materials. Presented at: 2017 INSUCON - 13th International Electrical Insulation Conference (INSUCON) Birmingham, UK 16-18 May 2017. 2017 INSUCON - 13th International Electrical Insulation Conference (INSUCON). IEEE. , pp.1-6. (10.23919/INSUCON.2017.8097175)
Ahmad, M. et al. 2017. Random forests and artificial neural network for predicting daylight illuminance and energy consumption. Presented at: Building Simulation 2017: 15th Conference of International Building Performance Simulation Association San Francisco, CA, USA 7-9 August 2017. Published in: Barnaby, C. S. and Wetter, M. eds. Building Simulation 2017. Vol. 15.Proceedings of the International Building Performance Simulation Association IBPSA. , pp.1949-1955.
Ahmad, M. , Mourshed, M. and Rezgui, Y. 2017. Trees vs neurons: Comparison between random forest and ANN for high-resolution prediction of building energy consumption. Energy and Buildings 147 , pp.77-89. (10.1016/j.enbuild.2017.04.038)
Ahmadian, R. , Falconer, R. and Bockelmann-Evans, B. 2017. Hydro-environmental modelling of a Severn Barrage with very low head turbines. Presented at: 37th IAHR World Congress Kuala Lumpur, Malaysia 13-18 August 2017. , pp.-.
Ahmadian, R. et al. 2017. Optimisation of tidal range schemes. Presented at: 12th European Wave and Tidal Energy Conference Cork, Ireland 27 August - 1 September 2017. , pp.-.
Ahmed, Z. J. , Prickett, P. w. and Grosvenor, R. I. 2017. The difficulties of the assessment of tool life in CNC milling. Presented at: The International Conference for Students on Applied Engineering Newcastle, United Kingdom 20-21 October 2016. Published in: Al-Shibaany, Z. Y. A. and Hameed, A. F. eds. 2016 International Conference for Students on Applied Engineering (ICSAE) Proceedings. Piscataway, NJ: IEEE. , pp.452-457. (10.1109/ICSAE.2016.7810234)
Ahmed, Z. , Prickett, P. and Grosvenor, R. 2017. Assessing uneven milling cutting tool wear using component measurement. Presented at: COMADEM 2017: 30th International Congress & Exhibition on Condition Monitoring and Diagnostic Engineering Management Preston and Grange-Over-Sands, UK 10-13 July 2017. 30th International Conference on Condition Monitoring and Diagnostic Engineering Management. , pp.262-269.
Aithal, A. , Li, G. and Wu, J. 2017. Grid side unbalanced fault detection using soft open point in an electrical distribution network. Energy Procedia 105 , pp.2859-2864. (10.1016/j.egypro.2017.03.631)
Aithal, A. and Wu, J. 2017. Operation and performance of a medium-voltage DC link. CIRED - Open Access Proceedings Journal 2017 (1), pp.1355-1358. (10.1049/oap-cired.2017.0946)
Al Essa, M. 2017. The integration of distributed energy resources into electric power systems. PhD Thesis , Cardiff University.
Al Gohani, F. 2017. Comparison of peripheral quantitative computed tomography and magnetic resonance imaging for tissue characterisation in the gastrocnemius muscle. PhD Thesis , Cardiff University.
Al Tahmazi, T. 2017. Characteristics and mechanisms of phosphorus removal by dewatered water treatment sludges and the recovery. PhD Thesis , Cardiff University.
Al-Akaishi, A. et al. 2017. CFD analysis of the fluidised bed hydrodynamic behaviour inside an isothermal gasifier with different perforated plate distributors. Energy Procedia 142 , pp.835-840. (10.1016/j.egypro.2017.12.134)
Al-Azzawi, A. S. M. , Kawashita, L. F. and Featherston, C. A. 2017. Buckling and postbuckling behaviour of Glare laminates containing splices and doublers. Part 2: Numerical modelling. Composite Structures 176 , pp.1170-1187. (10.1016/j.compstruct.2017.04.063)
Al-Azzawi, A. S. M. et al. 2017. Buckling and postbuckling behaviour of glare laminates containing splices and doublers. Part 1: instrumented tests. Composite Structures 176 , pp.1158-1169. (10.1016/j.compstruct.2017.04.030)
Al-Azzawi, A. 2017. Analysis of static and fatigue damage in aluminium/GFRP hybrid composites. PhD Thesis , Cardiff University.
Al-Azzawi, B. S. and Karihaloo, B. L. 2017. Flexural fatigue behavior of a self-compacting ultrahigh performance fiber-reinforced concrete. ASCE Journal of Materials in Civil Engineering 29 (11) 4017210. (10.1061/(ASCE)MT.1943-5533.0002051)
Al-Azzawi, B. S. and Karihaloo, B. L. 2017. Mechanical and fracture properties of a self-compacting version of CARDIFRC Mix II. Sadhana 42 (5), pp.795-803. (10.1007/s12046-017-0641-9)
Al-Badran, Y. et al., 2017. Swelling behavior of bentonite-based backfilling materials in nuclear waste repository conditions. Journal of Hazardous, Toxic, and Radioactive Waste 21 (1) D4015006. (10.1061/(ASCE)HZ.2153-5515.0000308)
Al-Doboon, A. et al. 2017. CO 2 -argon-steam oxy-fuel (CARSOXY) combustion for CCS inert gas atmospheres in gas turbines. Applied Thermal Engineering 122 , pp.350-358. (10.1016/j.applthermaleng.2017.05.032)
Al-Dulaimi, Z. 2017. Non-aqueous shale gas recovery system. PhD Thesis , Cardiff University.
Al-Fahham, M. 2017. A modelling and experimental study to reduce boundary layer flashback with microstructure. PhD Thesis , Cardiff University.
Al-Fahham, M. et al. 2017. Experimental study to enhance swirl burner against boundary layer flashback. Energy Procedia 142 , pp.1534-1538. (10.1016/j.egypro.2017.12.604)
Al-Fahham, M. et al. 2017. Investigation of boundary layer flashback enhancement in swirl burner using woven wire mesh. Presented at: 8th European Combustion Meeting 2017 Dubrovnik, Croatia 18-21 April 2017.
Al-Fahham, M. et al. 2017. Experimental study to enhance resistance for boundary layer flashback in swirl burners using microsurfaces. Presented at: ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition North Carolina, USA 26-30 June 2017. ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. Vol. 4A.ASME(10.1115/GT2017-63367)
Al-Farraji, A. 2017. Chemical engineering and reactor design of a fluidised bed gasifier. PhD Thesis , Cardiff University.
Al-Farraji, A. , Marsh, R. and Steer, J. M. 2017. A comparison of the pyrolysis of olive kernel biomass in fluidised and fixed bed conditions. Waste and Biomass Valorization 8 (4), pp.1273-1284. (10.1007/s12649-016-9670-6)
Al-Hussaini, O. 2017. Volume change behaviour of some geomaterials under combined influence of freeze-thaw and wet-dry cycles: An experimental investigation. PhD Thesis , Cardiff University.
Al-Khafaji, A. A. G. and Grosvenor, R. I. 2017. Experimental model-based approach to integrated prognostic and health management of a non-linear liquid level system. International Journal of Comadem , pp.-.
Al-Madhhachi, H. 2017. Solar powered thermoelectric distillation system. PhD Thesis , Cardiff University.
Al-Madhhachi, H. and Gao, M. 2017. Effective use of thermal energy at both hot and cold side of thermoelectric module for developing efficient thermoelectric water distillation system. Energy Conversion and Management 133 , pp.14-19. (10.1016/j.enconman.2016.11.055)
Al-Madhhachi, H. , Phillips, M. and Gao, M. 2017. Validation of vapour / water production in a thermoelectric distillation system. Presented at: the 3rd World Congress on Mechanical, Chemical, and Material Engineering (MCM'17) Rome - Italy 8-10 June 2017. Proceedings of the 3rd World Congress on Mechanical, Chemical, and Material Engineering (MCM'17). Ottawa, ON, Canada: Avestia Publishing. , pp.117-1. (10.11159/htff17.117)
Al-Madhhachi, H. , Prest, M. and Min, G. 2017. Evaluation of the convection heat transfer coefficient in a thermoelectric distillation system. Presented at: International Conference for Students on Applied Engineering (ICSAE) Newcastle, UK 20-21 October 2016. 2016 International Conference for Students on Applied Engineering (ICSAE). IEEE. , pp.213-217. (10.1109/ICSAE.2016.7810190)
Al-Mayali, M. 2017. Plastic deformation and residual stress of surface roughness asperities in elastohydrodynamic contact with consideration of surface fatigue. PhD Thesis , Cardiff University.
Al-Mayali, M. F. , Evans, H. P. and Sharif, K. 2017. Assessment of the effects of residual stresses on fatigue life of real rough surfaces in lubricated contact. Presented at: 2016 International Conference for Students on Applied Engineering (ICSAE) Newcastle upon Tyne, UK 20-21 October 2016. International Conference for Students on Applied Engineering (ICSAE). Piscataway, NJ: IEEE. , pp.123-128. (10.1109/ICSAE.2016.7810173)
Al-Mosallam, M. and Yokoi, K. 2017. Efficient implementation of volume/surface integrated average based multi-moment method. International Journal of Computational Methods 14 (2), pp.-. (10.1142/S0219876217500104)
Al-Rubaye, M. M. , Kulasegaram, S. and Karihaloo, B. L. 2017. Simulation of self-compacting concrete in an L-box using smooth particle hydrodynamics. Magazine of Concrete Research 69 (12), pp.618-628. (10.1680/jmacr.16.00408)
Al-Saad, M. 2017. Blood flow simulation using smooth particle hydrodynamics. PhD Thesis , Cardiff University.
Al-Wakeel, A. , Wu, J. and Jenkins, N. 2017. k-means based load estimation of domestic smart meter measurements. Applied Energy 194 , pp.333-342. (10.1016/j.apenergy.2016.06.046)
Al-Ziayree, A. M. L. , Perks, R. M. and Cripps, S. C. 2017. A 25 µm spatial resolution broadband microwave voltage probe. Presented at: 2016 International Conference for Students on Applied Engineering (ICSAE) Newcastle upon Tyne, UK 20-21 October 2016. International Conference for Students on Applied Engineering (ICSAE). IEEE. , pp.7-11. (10.1109/ICSAE.2016.7810152)
Alam, M. M. et al., 2017. Effects of VSC based HVDC system on distance protection of transmission lines. International Journal of Electrical Power and Energy Systems 92 , pp.245-260. (10.1016/j.ijepes.2017.04.012)
Albaaji, A. J. et al. 2017. Enhancement in the elongation, yield strength and magnetic properties of intermetallic FeCo alloy using spark plasma sintering. Journal of Materials Science 52 , pp.13284-13295. (10.1007/s10853-017-1435-5)
Albaaji, A. J. et al. 2017. Effect of ball-milling time on mechanical and magnetic properties of carbon nanotube reinforced FeCo alloy composites. Materials & Design 122 , pp.296-306. (10.1016/j.matdes.2017.02.091)
Albaaji, A. 2017. Development of soft magnetic alloy by nanomaterials. PhD Thesis , Cardiff University.
Albano, M. et al. 2017. Investigation of surface properties of silicone rubber samples with nanofillers. Presented at: 51st International Universities Power Engineering Conference (UPEC 2016) Coimbra, Portugal 6-9 September 2016. 2016 51st International Universities Power Engineering Conference (UPEC). IEEE(10.1109/UPEC.2016.8114033)
Albelwi, N. , Kwan, A. and Rezgui, Y. 2017. Using Material and Energy Flow Analysis to Estimate Future Energy Demand at the City Level. Energy Procedia 115 , pp.440-450. (10.1016/j.egypro.2017.05.041)
Aldossary, N. A. , Rezgui, Y. and Kwan, A. S. K. 2017. Establishing domestic low energy consumption reference levels for Saudi Arabia and the wider Middle Eastern region. Sustainable Cities and Society 28 , pp.265-276. (10.1016/j.scs.2016.09.015)
Aldoumani, A. 2017. Calibration enhancement of non-linear VNA system. PhD Thesis , Cardiff University.
Aldoumani, N. 2017. Instrumentations to investigate magnetoreception in homing pigeons (Columba livia). PhD Thesis , Cardiff University.
Alexopoulos, T. and Packianather, M. 2017. A monitoring and data analysis system to achieve zero-defects manufacturing in highly regulated industries. Presented at: 4th International Conference on Sustainable Design and Manufacturing Bologna, Italy Apr 2017. Sustainable Design and Manufacturing 2017. Vol. 68.Cham: Springer. , pp.303-313. (10.1007/978-3-319-57078-5_30)
Algaddafi, A. and Elnaddab, K. 2017. Modelling and designing the RC snubber circuit for a buck converter and testing its effectiveness. Presented at: 2016 International Renewable and Sustainable Energy Conference (IRSEC) Marrakech, Morocco 14-17 November 2016. 2016 International Renewable and Sustainable Energy Conference (IRSEC), Proceedings. IEEE. , pp.554. (10.1109/IRSEC.2016.7984061)
Algaddafi, A. et al., 2017. Comparing the performance of bipolar and unipolar switching frequency to drive DC-AC Inverter. Presented at: 2016 International Renewable and Sustainable Energy Conference (IRSEC) Marrakech, Morocco 14-17 November 2016. 2016 International Renewable and Sustainable Energy Conference (IRSEC), Proceedings. IEEE. , pp.680. (10.1109/IRSEC.2016.7984067)
Alghamdi, A. , Prickett, P. and Setchi, R. 2017. A conceptual framework to support decision-making in remanufacturing engineering processes. In: Campana, G. et al., Sustainable Design and Manufacturing 2017. Vol. 68, Smart Innovation, Systems and Technologies Springer International Publishing. , pp.222-232. (10.1007/978-3-319-57078-5_22)
Allmark, M. , Grosvenor, R. and Prickett, P. 2017. An approach to the characterisation of the performance of a tidal stream turbine. Renewable Energy 111 , pp.849-860. (10.1016/j.renene.2017.05.010)
Allmark, M. , Prickett, P. and Grosvenor, R. 2017. Detection of tidal stream turbine rotor imbalance faults for turbulent flow conditions and optimal tip speed ratio control. Presented at: 12th European Wave and Tidal Energy Conference (EWTEC) Cork, Ireland 27 August - 1 September 2017.
Almatouq, A. 2017. Study of the parameters for optimisation of the design and performance of Bio-electrochemical systems for energy/hydrogen generation and resource recovery. PhD Thesis , Cardiff University.
Almatouq, A. and Babatunde, A. 2017. Concurrent hydrogen production and phosphorus recovery in dual chamber microbial electrolysis cell. Bioresource Technology 237 , pp.193-203. (10.1016/j.biortech.2017.02.043)
Almuktar, S. A. , Abed, S. N. and Scholz, M. 2017. Recycling of domestic wastewater treated by vertical-flow wetlands for irrigation of two consecutive Capsicum annuum generations. Ecological Engineering 107 (10.1016/j.ecoleng.2017.07.002)
Almuramady, N. 2017. Dry friction between rough surfaces of silicon and functionalized gear microelectromechanical systems. PhD Thesis , Cardiff University.
Almuramady, N. and Borodich, F. M. 2017. Adhesive contact between silicon-based mems tooth surfaces modelled by the multiscale multi-block model. International Journal of Advances on Automotive and Technology 1 (2), pp.59-66. (10.15659/ijaat.17.04.523)
Almuramady, N. and Borodich, F. 2017. Simulations of sliding adhesive contact between microgear teeth in silicon-based MEMS work in a vacuum environment. Presented at: 25th UKACM Conference on Computational Mechanics 12 –13 April 2017, University of Birmingham Birmingham, United Kingdom 12 –13 April 2017. Proceedings of the 25th Conference on Computational Mechanics UKACM 2017. Birmingham: University of Birmingham. , pp.38-41.
Alraziqi, Z. 2017. Express analysis of actual bluntness of AFM probe tips. PhD Thesis , Cardiff University.
Alraziqi, Z. N. R. , Brousseau, E. B. J. P. and Borodich, F. M. 2017. A new metric to assess the tip condition of AFM probes based on three-dimensional data. Presented at: 2016 International Conference for Students on Applied Engineering (ICSAE) Newcastle upon Tyne, UK 20-21 October 2016. Students on Applied Engineering (ICSAE), International Conference for. IEEE. , pp.24-29. (10.1109/ICSAE.2016.7810155)
Alreshidi, E. , Mourshed, M. and Rezgui, Y. 2017. Factors for effective BIM governance. Journal of Building Engineering 10 , pp.89-101. (10.1016/j.jobe.2017.02.006)
Alsaegh, A. S. , Hatem, F. and Valera Medina, A. 2017. Visualisation of turbulent flows in a swirl burner under the effects of axial air jets. Energy Procedia 142 , pp.1680-1685. (10.1016/j.egypro.2017.12.549)
Alsaegh, A. et al. 2017. CFD simulation and validation of hydrodynamic instabilities onset in swirl combustors. Presented at: 8th European Combustion Meeting 2017 Dubrovnik, Croatia 18-21 April 2017.
Alt, A. and Lees, J. 2017. Improving efficiency, linearity and linearisability of an asymmetric doherty power amplifier by modulating the peaking amplifier’s supply voltage. Presented at: 20th EuMW 2017 Nuremberg, Germany 8-13 October 2017. 2017 47th European Microwave Conference (EuMC). IEEE. , pp.464-467. (10.23919/EuMC.2017.8230890)
Alt, A. et al. 2017. Concept for the implementation of very high directivity and decade bandwidth in compact microstrip directional couplers. Presented at: 2016 46th European Microwave Conference (EuMC) London, UK 3-7 October 2017. 2016 46th European Microwave Conference (EuMC). IEEE. , pp.210-213. (10.1109/EuMC.2016.7824315)
Alyhya, W. S. , Kulasegaram, S. and Karihaloo, B. L. 2017. Simulation of the flow of self-compacting concrete in the V-funnel by SPH. Cement and Concrete Research 100 , pp.47-59. (10.1016/j.cemconres.2017.05.021)
Ameen, R. 2017. A framework for the sustainability assessment of urban design and development in Iraqi cities. PhD Thesis , Cardiff University.
Ameen, R. F. M. and Mourshed, M. 2017. Urban environmental challenges in developing countries—A stakeholder perspective. Habitat International 64 , pp.1-10. (10.1016/j.habitatint.2017.04.002)
Ameli, H. , Qadrdan, M. and Strbac, G. 2017. Techno-economic assessment of battery storage and Power-to-Gas: A whole-system approach. Energy Procedia 142 , pp.841-848. (10.1016/j.egypro.2017.12.135)
Ameli, H. , Qadrdan, M. and Strbac, G. 2017. Value of gas network infrastructure flexibility in supporting cost effective operation of power systems. Applied Energy 202 , pp.571-580. (10.1016/j.apenergy.2017.05.132)
Angeloudis, A. and Falconer, R. A. 2017. Sensitivity of tidal lagoon and barrage hydrodynamic impacts and energy outputs to operational characteristics. Renewable Energy 114 (A), pp.337-351. (10.1016/j.renene.2016.08.033)
Anssari-Benam, A. et al., 2017. A transverse isotropic viscoelastic constitutive model for aortic valve tissue. Royal Society Open Science 4 (1) 160585. (10.1098/rsos.160585)
Anyebe, E. A. 2017. Influence of growth parameters on In-droplet-assisted growth of InAs nanowires on silicon. Applied Nanoscience 7 (7), pp.365-370. (10.1007/s13204-017-0585-8)
Anyebe, E. A. et al. 2017. Optimization of self-catalyzed InAs nanowires on flexible graphite for photovoltaic infrared photodetectors. Scientific Reports 7 46110. (10.1038/srep46110)
Arciniegas, M. P. et al., 2017. Laser-induced localized growth of methylammonium lead halide perovskite nano- and microcrystals on substrates. Advanced Functional Materials 27 (34), pp.-. 1701613. (10.1002/adfm.201701613)
Argatov, I. I. et al., 2017. Contact stiffness depth-sensing indentation: Understanding of material properties of thin films attached to substrates. Mechanics of Materials 114 , pp.172-179. (10.1016/j.mechmat.2017.08.009)
Armstrong, H. S. and Nokes, L. D. M. 2017. Sensor node acceleration signatures and electromyography in synchronisation and sequencing analysis in sports: a rowing perspective. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology 231 (4), pp.253-261. (10.1177/1754337116667204)
Arthur, S. , Li, H. and Lark, R. 2017. A collaborative unified computing platform for building information modelling (BIM). Presented at: PRO-VE 2017: Collaboration in a Data-Rich World Vicenza, Italy 18-20 September 2017. Published in: Camarinha-Matos, L. M. , Afsarmanesh, H. and Fornasier, R. eds. Collaboration in a Data-Rich World: 18th IFIP WG 5.5 Working Conference on Virtual Enterprises, PRO-VE 2017, Vicenza, Italy, September 18-20, 2017, Proceedings. Vol. 506.IFIP Advances in Information and Communication Technology Cham: Springer Verlag. , pp.63-73. (10.1007/978-3-319-65151-4_6)
Assi Obaid, Z. , Cipcigan, L. and Muhssin, M. T. 2017. Power system oscillations and control: Classifications and PSSs' design methods: A review. Renewable and Sustainable Energy Reviews 79 , pp.839-849. (10.1016/j.rser.2017.05.103)
Atroshchenko, E. et al., 2017. Micro-structured materials: inhomogeneities and imperfect interfaces in plane micropolar elasticity, a boundary element approach. Engineering Analysis with Boundary Elements 83 , pp.195-203. (10.1016/j.enganabound.2017.07.023)
Augustyniak, M. and MIn, G. 2017. Influence of various titanium oxide blocking layers on performance of dye-sensitized solar cells. Presented at: International Conference for Students on Applied Engineering (ICSAE) Newcastle, UK 20-21 October 2016. International Conference for Students on Applied Engineering (ICSAE). Piscataway, NJ: IEEE. , pp.280-285. (10.1109/ICSAE.2016.7810203)
Azizian Fard, M. et al., 2017. Partial discharge behaviour under operational and anomalous conditions in HVDC systems. IEEE Transactions on DEI 24 (3), pp.1494-1502. (10.1109/TDEI.2017.006469)
Azzopardi, C. , Hicks, Y. A. and Camilleri, K. P. 2017. Automatic carotid ultrasound segmentation using deep convolutional neural networks and phase congruency maps. Presented at: 14th International Symposium on Biomedical Imaging Melbourne, Australia 18-21 Apr 2017. 14th International Symposium on Biomedical Imaging (ISBI 2017). IEEE. , pp.624-628. (10.1109/ISBI.2017.7950598)
Baig, H. et al., 2017. Outdoor performance of a reflective type 3D LCPV system under different climatic conditions. Presented at: 13th International Conference on Concentrator Photovoltaic Systems Ontario, Canada 1-3 May 2017. Vol. 1881.AIP Publishing. , pp.-. (10.1063/1.5001403)
Balasubramaniam, S. 2017. Series current flow controllers for high voltage direct current transmission grids. PhD Thesis , Cardiff University.
Barnard, J. M. 2017. Simulation of mixing-limited reactions using a continuum approach. Advances in Water Resources 104 , pp.15-22. (10.1016/j.advwatres.2017.03.012)
Bastida, H. , Ugalde Loo, C. E. and Abeysekera, M. 2017. Dynamic modelling and control of a reciprocating engine. Energy Procedia 142 , pp.1282-1287. (10.1016/j.egypro.2017.12.486)
Bastida, H. et al., 2017. Dynamic modeling and control of a plate heat exchanger. Presented at: 2017 IEEE Conference on Energy Internet and Energy System Integration (EI2) Beijing, China 26-28 November 2017. 2017 IEEE Conference on Energy Internet and Energy System Integration (EI2). IEEE(10.1109/EI2.2017.8245736)
Bauchy, M. et al., 2017. Topological control on the structural relaxation of atomic networks under stress. Physical Review Letters 119 (3) 35502. (10.1103/PhysRevLett.119.035502)
Baxani Kamal, D. et al. 2017. The microfluidic manufacture of encapsulated droplet interface bilayers using a hybrid 3D-printed coaxial device. Presented at: 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2016) Dublin, Ireland 9-13 October 2016. Proceedings of the 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2016). Red Hook, New York: Curran Associates, Inc.
Beach, T. et al. 2017. Management of collaborative BIM data by the Federatinon of Distributed Models. Journal of Computing in Civil Engineering 31 (4) 4017009. (10.1061/(ASCE)CP.1943-5487.0000657)
Beltrán-Pitarch, B. et al., 2017. Measurement of thermal conductivity and thermal diffusivity using a thermoelectric module. Measurement Science and Technology 28 (4) 45902. (10.1088/1361-6501/aa5c30)
Benakaprasad, B. et al., 2017. Terahertz microstrip elevated stack antenna technology on GaN-on-low resistivity silicon substrates for TMIC. Presented at: Microwave Conference (EuMC), 2016 46th European London, UK 4-6 Oct 2016. Microwave Conference (APMC) 2016 Asia-Pacific. IEEE. , pp.413. (10.1109/EuMC.2016.7824367)
Benakaprasad, B. et al. 2017. Design and performance comparison of various terahertz microstrip antennas on GaN-on-low resistivity silicon substrates for TMIC. Presented at: Microwave Conference (APMC), Asia-Pacific New Delhi, India 5-9 Dec 2016. Proceedings of the Asia-Pacific Microwave Conference 2016. IEEE(10.1109/APMC.2016.7931368)
Benharat, S. , Bouazabia, S. and Haddad, A. 2017. A study of the behavior of water droplets under the influence of non-uniform electric field in silicon rubber. Presented at: 2017 5th International Conference on Electrical Engineering - Boumerdes (ICEE-B) Boumerdes, Algeria 29-31 October 2017. 2017 5th International Conference on Electrical Engineering - Boumerdes (ICEE-B). IEEE(10.1109/ICEE-B.2017.8192023)
Beroual, A. and Haddad, A. (. 2017. Recent advances in the quest for a new insulation gas with a low impact on the environment to replace sulfur hexafluoride (SF6) gas in high-voltage power network applications. Energies 10 (8) 1216. (10.3390/en10081216)
Berthon, B. et al., 2017. Head and neck target delineation using a novel PET automatic segmentation algorithm. Radiotherapy and Oncology 122 (2), pp.242-247. (10.1016/j.radonc.2016.12.008)
Berthon, B. et al., 2017. Toward a standard for the evaluation of PET-Auto-Segmentation methods following the recommendations of AAPM task group No. 211: Requirements and implementation. Medical Physics 44 (8), pp.4098-4111. (10.1002/mp.12312)
Bhaduri, D. et al. 2017. On design and tribological behaviour of laser textured surfaces. Procedia CIRP 60 , pp.20-25. (10.1016/j.procir.2017.02.050)
Bhaduri, D. et al. 2017. Pulsed laser polishing of 3D printed mesoscale parts. Presented at: 39th MATADOR Conference Manchester, UK 5-7 Jul 2017.
Bhaduri, D. et al. 2017. Laser polishing of 3D printed mesoscale components. Applied Surface Science 405 , pp.29-46. (10.1016/j.apsusc.2017.01.211)
Bhaduri, D. et al. 2017. Ultrasonic assisted creep feed grinding of gamma titanium aluminide using conventional and superabrasive wheels. CIRP Annals - Manufacturing Technology 66 (1), pp.341-344. (10.1016/j.cirp.2017.04.085)
Bhatt, P. et al., 2017. Dynamic participation of DFIG for frequency regulation in electrical power systems. Energy Procedia 142 , pp.2183-2188. (10.1016/j.egypro.2017.12.586)
Biggs, P. R. et al. 2017. Biomechanical classification of gait following Total Knee Replacement surgery. Presented at: XXVI Congress of the International Society of Biomechanics Brisbane, Australia 23-27 July 2017.
Boiveau, T. , Burman, E. and Claus, S. 2017. Penalty-free Nitsche method for interface problems. Presented at: UCL Workshop 2016 London, UK January 2016. Published in: Bordas, S. et al., Geometrically Unfitted Finite Element Methods and Applications. Vol. 121.Lecture Notes in Computational Science and Engineering Cham: Springer. , pp.183-210. (10.1007/978-3-319-71431-8_6)
Boje, C. and Li, H. 2017. A framework for ontology-based design assessment for human behavior during fire evacuation. Presented at: 24 th International Workshop on Intelligent Computing in Engineering Nottingham, UK 10-12 July 2017. Proceedings of the 24th EG-ICE International Workshop on Intelligent Computing in Engineering (EG-ICE 2017). Curran Associates, Inc. , pp.-.
Borodich, F. and Savencu, O. 2017. Hierarchical models of engineering rough surfaces and bio-inspired adhesives. In: Heepe, L. , Xue, L. and Gorb, S. eds. Bio-inspired Structured Adhesives. Vol. 9, Biologically-Inspired Systems Springer. , pp.179-219. (10.1007/978-3-319-59114-8_10)
Botusharova, S. 2017. Self-healing geotechnical structures via microbial action. PhD Thesis , Cardiff University.
Bourantas, G. et al., 2017. An implicit potential method along with a meshless technique for incompressible fluid flows for regular and irregular geometries in 2D and 3D. Engineering Analysis with Boundary Elements 77 , pp.97-111. (10.1016/j.enganabound.2017.01.009)
Bower, T. 2017. Constitutive modelling of soils and fibre-reinforced soils. PhD Thesis , Cardiff University.
Bray, S. 2017. Multiscale hydro-environmental modelling of marine renewable energy devices, with particular application to the severn barrage. PhD Thesis , Cardiff University.
Brazzini, T. et al., 2017. Hot-electron electroluminescence under RF operation in GaN-HEMTs: A comparison among operational classes. IEEE Transactions on Electron Devices 64 (5), pp.2155-2160. (10.1109/TED.2017.2686782)
Bronik, K. 2017. Implementation and validation of a cohesive fracture model through contact mechanics with application to cutting and needle insertion into human skin. PhD Thesis , Cardiff University.
Brousseau, E. B. J. P. et al. 2017. Increasing the processing speed of AFM tip-based nanomachining at the tool-workpiece interface. Presented at: 2017 World Congress on Micro and Nano Manufacturing Kaohsiung, Taiwan 27-30 March 2017. 2017 World Congress on Micro and Nano Manufacturing. , pp.343-346.
Brousseau, E. et al. 2017. A Computer-Aided Design and manufacturing implementation of the atomic force microscope tip-based nanomachining process for two-dimensional patterning. Journal of Micro and Nano-Manufacturing 5 (4) 41003. (10.1115/1.4037694)
Buffi, M. et al., 2017. Emissions and combustion performance of a micro gas turbine powered with liquefied wood and its blends. Energy Procedia 142 , pp.297-302. (10.1016/j.egypro.2017.12.047)
Buffi, M. , Chiaramonti, D. and Valera-Medina, A. 2017. Strategies toward experimental assessments of new aviation renewable fuels and blends: The BIOREFLY Project. Energy Procedia 105 , pp.433-438. (10.1016/j.egypro.2017.03.337)
Buffi, M. et al., 2017. Emissions characterization tests for hydrotreated renewable jet fuel from used cooking oil and its blends. Applied Energy 201 , pp.84-93. (10.1016/j.apenergy.2017.05.104)
Cai, C. et al., 2017. Hot isostatic pressing of in-situ TiB/Ti-6Al-4V composites with novel reinforcement architecture, enhanced hardness and elevated tribological properties. Journal of Alloys and Compounds 710 , pp.364-374.
Camarchia, V. et al., 2017. A design strategy for AM/PM compensation in GaN Doherty power amplifiers. IEEE Access 5 , pp.22244-22251. (10.1109/ACCESS.2017.2759164)
Camarchia, V. et al., 2017. Power amplifier MMICs for 15 GHz microwave links in 0.25 mu m GaN technology. Presented at: 2017 Integrated Nonlinear Microwave and Millimetre-wave Circuits Workshop (INMMiC) Graz, Austria 20-21 April 2017. 2017 Integrated Nonlinear Microwave and Millimetre-wave Circuits Workshop (INMMiC). IEEE(10.1109/INMMIC.2017.7927311)
Cere, G. et al. 2017. Multi-objective consideration of earthquake resilience in the built environment: the case of Wenchuan earthquake. Presented at: 2017 International Conference on Engineering, Technology and Innovation (ICE/ITMC) Madeira, Portugal 26-30 June 2017.
Cernescu, A. 2017. The influence of crack tip shielding on fatigue crack propagation. Frattura ed Integrità Strutturale 11 (41), pp.307-313. (10.3221/IGF-ESIS.41.41)
Cerѐ, G. , Rezgui, Y. and Zhao, W. 2017. Critical review of existing built environment resilience frameworks: directions for future research. International Journal of Disaster Risk Reduction 25 , pp.173-189. (10.1016/j.ijdrr.2017.09.018)
Chang, S. , Meng, Q. and Liang, Y. 2017. Experimental study of hydraulic stability for variable water volume air conditioning System. Procedia Engineering 205 , pp.1072-1078. (10.1016/j.proeng.2017.10.172)
Chaudhary, M. A. et al., 2017. Characterization of baseband electrical memory in microwave devices using multi-tone measurement system. Presented at: 2016 16th Mediterranean Microwave Symposium (MMS) 14-16 November 2016. 16th Mediterranean Microwave Symposium (MMS), 2016. IEEE. , pp.1. (10.1109/MMS.2016.7803811)
Cheah, M. 2017. Offshore wind integration through high voltage direct current systems. PhD Thesis , Cardiff University.
Cheah-Mane, M. et al. 2017. Criterion for the electrical resonance stability of offshore wind power plants connected through HVDC links. IEEE Transactions on Power Systems 32 (6), pp.4579-4589. (10.1109/TPWRS.2017.2663111)
Chen, B. et al., 2017. Response control of a large transmission tower-line system under seismic excitations using friction dampers. Advances in Structural Engineering 20 (8), pp.1155-1173. (10.1177/1369433216679999)
Chen, K. and Li, H. 2017. BIM strategic implementation: benchmarking based decision making framework. CreateSpace Independent Publishing Platform.
Chen, L. et al., 2017. CF3I gas mixtures: breakdown characteristics and potential for electrical insulation. IEEE Transactions on Power Delivery 32 (2), pp.1089-1097. (10.1109/TPWRD.2016.2602259)
Chen, R. et al., 2017. An automated generation method of system architecture with component's multi-criterion evaluation. Presented at: The 21st International Conference on Engineering Design Vancouver, Canada 21-25 Aug 2017.
Chen, Y. et al., 2017. Resilient regional energy benchmarking of classified public buildings. Energy Procedia 142 , pp.2365-2370. (10.1016/j.egypro.2017.12.168)
Cheng, M. , Sami, S. S. and Wu, J. 2017. Benefits of using virtual energy storage system for power system frequency response. Applied Energy 194 , pp.376-385. (10.1016/j.apenergy.2016.06.113)
Cheng, M. et al. 2017. Performance of industrial melting pots in the provision of dynamic frequency response in the Great Britain power system. Applied Energy 201 , pp.245-256. (10.1016/j.apenergy.2016.12.014)
Chengshan, W. et al., 2017. Smart electricity distribution networks. CRC Press.
Chernyshova, M. et al., 2017. Development of GEM detector for tokamak SXR tomography system: Preliminary laboratory tests. Fusion Engineering and Design (10.1016/j.fusengdes.2017.03.107)
Chizari, H. and Ismail, F. 2017. Accuracy variations in residual distribution and finite volume methods on triangular grids. Bulletin of the Malaysian Mathematical Sciences Society 40 (3), pp.1231-1264. (10.1007/s40840-015-0292-0)
Chizari, H. and Ismail, F. 2017. A grid-Insensitive LDA method on triangular grids solving the system of Euler equations. Journal of Scientific Computing 71 (2), pp.839-874. (10.1007/s10915-016-0323-5)
Choi, H. 2017. Recent developments in minimally and truly non-invasive blood glucose monitoring techniques. Presented at: IEEE Sensors 2017 Glasgow, Scotland 29 October - 1 November 2017. 2017 IEEE Sensors Conference Proceedings. IEEE. , pp.1-3. (10.1109/ICSENS.2017.8234291)
Choi, H. et al. 2017. Microwave noninvasive blood glucose monitoring sensor: human clinical trial results. Presented at: IEEE MTT-S International Microwave Symposium 2017 Honolulu, Hawaii, USA 4 - 9 June 2017. Microwave Symposium (IMS), 2017 IEEE MTT-S International. , pp.876-879. (10.1109/MWSYM.2017.8058721)
Chong, C. T. et al., 2017. Morphology and growth of carbon nanotubes catalytically synthesised by premixed hydrocarbon-rich flames. Materials Chemistry and Physics 197 , pp.246-255. (10.1016/j.matchemphys.2017.05.036)
Christensen-Jeffries, K. et al., 2017. Microbubble axial localization errors in ultrasound super-resolution imaging. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control 64 (11), pp.1644-1654. (10.1109/TUFFC.2017.2741067)
Chuanyue, L. , Wang, S. and Liang, J. 2017. Bypassing SM strategy applied in interconnected LCC-HVDCs for commutation failure mitigation. Presented at: 13th IET International Conference on AC and DC Power Transmission (ACDC 2017) Manchester, UK 14-16 Feb 2017. Proceedings of the 13th IET International Conference on AC and DC Power Transmission (ACDC 2017). IEEE(10.1049/cp.2017.0066)
Cimarelli, A. et al., 2017. A priori and a posteriori analysis of the flow around a rectangular cylinder. Journal of Physics: Conference Series 923 12028. (10.1088/1742-6596/923/1/012028)
Clark, D. et al., 2017. Spectroscopic techniques for temperature measurement of laboratory generated lightning arcs. Presented at: 20th International Symposium on High Voltage Engineering Buenos Aires, Argentina 28 August - 1 September 2017.
Clark, N. , Jones, N. and Porch, A. 2017. Measurement of average particle size in metal powders by microwave cavity perturbation in the magnetic field. Sensors and Actuators A: Physical 259 , pp.137-143. (10.1016/j.sna.2017.03.037)
Clark, N. 2017. Microwave methods for additive layer manufacturing. PhD Thesis , Cardiff University.
Clark, N. , Hefford, S. and Porch, A. 2017. Effect of build orientation and surface finish on surface resistance in microwave components produced by Selective Laser Melting. Presented at: 47th European Microwave Conference (EuMC) Nuremberg, Germany 10-12 October 2017. 2017 47th European Microwave Conference (EuMC). IEEE. , pp.508-511. (10.23919/EuMC.2017.8230901)
Clark, N. , Shaw, G. and Porch, A. 2017. Effect of surface stresses on microwave surface resistance and its impact for cavity perturbation measurements. IEEE Microwave and Wireless Components Letters 27 (10), pp.939-941. (10.1109/LMWC.2017.2745486)
Clarke, A. et al. 2017. Effects of profile errors on lubrication performance of helical gears. Tribology International 111 , pp.184-191. (10.1016/j.triboint.2017.02.034)
Coburn, B. H. and Wu, Z. 2017. Buckling analysis of stiffened variable angle tow skins using energy methods. Presented at: 17th International Conference on Composite Structures, ICCS17 Porto, Portugal 17-21 June 2013.
Cocconi, G. et al. 2017. Small scale dynamics of a shearless turbulent/non-turbulent interface in dilute polymer solutions. Physics of Fluids 29 (7) 75102. (10.1063/1.4991921)
Cockerill, A. 2017. Damage detection of rotating machinery. PhD Thesis , Cardiff University.
Coppo, M. et al., 2017. A procedure for detailed assessment of ground fault-current distribution in transmission networks. Presented at: UPEC 2016: 51st International Universities Power Engineering Conference Coimbra, Portugal 6-9 September 2016. 2016 51st International Universities Power Engineering Conference (UPEC). IEEE(10.1109/UPEC.2016.8114079)
Coutts, F. K. et al., 2017. Complexity and search space reduction in cyclic-by-row PEVD algorithms. Presented at: 2016 50th Asilomar Conference on Signals, Systems and Computers Pacific Grove, CA, USA 6-9 November 2016. 2016 50th Asilomar Conference on Signals, Systems and Computers. IEEE. , pp.1349-1353. (10.1109/ACSSC.2016.7869595)
Cowle, M. , Babatunde, A. and Bockelmann-Evans, B. N. 2017. The frictional resistance induced by bacterial based biofouling in drainage pipelines. Journal of Hydraulic Research 55 (2), pp.269-283. (10.1080/00221686.2016.1212411)
Coz, N. , Ahmadian, R. and Falconer, R. 2017. High resolution 3D modelling of the Swansea Bay Tidal Lagoon. Presented at: 10th International Conference on Sustainable Energy and Environmental Protection Bled, Slovenia 27-30 June 2017. Published in: Krope, J. et al., Proceedings of the10th international Conference on Sustainable Energy and Environmental Protection. SEEP Maribor, Slovenia: University of Maribor Press. , pp.45-55. (10.18690/978-961-286-055-4.5)
Coz, N. , Ahmadian, R. and Falconer, R. 2017. Modelling the impacts of marine renewable energy structures in the Severn Estuary and Bristol Channel, UK. Presented at: 37th IAHR World Congress Kuala Lumpur, Malaysia 13-18 August 2017. , pp.-.
Crane, R. et al. 2017. Physicochemical composition of wastes and co-located landscape designations at legacy 1 mine sites in south west England and Wales: Implications on resource potential. Resources, Conservation and Recycling 123 , pp.117-134. (10.1016/j.resconrec.2016.08.009)
Cripps, S. C. 2017. Great Equations? [Microwave Bytes]. IEEE Microwave Magazine 18 (2), pp.24-27. (10.1109/MMM.2016.2635924)
Crivelli, D. et al. 2017. Passive ultrasound patch for monitoring joint crepitus. Presented at: XXVI Congress of the International Society of Biomechanics Brisbane, Australia 23-27 July 2017.
Crivelli, D. et al. 2017. Condition monitoring of rotating machinery with Acoustic Emission: a British-Australian collaboration. Presented at: 12th World Congress On Engineering Asset Management & 13th International Conference On Vibration Engineering And Technology Of Machinery Brisbane 2017.
Cuenca, J. A. , Slocombe, D. R. and Porch, A. 2017. Corrections to 'temperature correction for cylindrical cavity perturbation measurements'. IEEE Transactions on Microwave Theory and Techniques 65 (12), pp.5078. (10.1109/TMTT.2017.2751550)
Cuenca, J. A. , Slocombe, D. R. and Porch, A. 2017. Temperature correction for cylindrical cavity perturbation measurements. IEEE Transactions on Microwave Theory and Techniques 65 (6), pp.2153-2161. (10.1109/TMTT.2017.2652462)
D'Arienzo, M. et al., 2017. Phantom validation of quantitative Y-90 PET/CT based dosimetry in liver radioembolisation. EJNMMI Research 7 94. (10.1186/s13550-017-0341-9)
Da Silva, D. A. et al., 2017. A comparative study between surge arrester monitoring through capacitive/resistive measurement bridge and digital decomposition. Presented at: 2016 IEEE PES Transmission & Distribution Conference and Exposition-Latin America (PES T&D-LA) Morelia, Mexico 21-23 September 2016. Transmission & Distribution Conference and Exposition-Latin America (PES T&D-LA), 2016 IEEE PES. IEEE. , pp.1-6. (10.1109/TDC-LA.2016.7805670)
Dabkowski, A. et al. 2017. Optimization of Zirconium-89 production in IBA cyclone 18/9 cyclotron with COSTIS solid target system. Presented at: WTTC16: Proceedings of the 16th International Workshop on Targetry and Target Chemistry Santa Fe, NM, USA 29 August–1 September 2016. Published in: Engle, J. W. et al., AIP Conference Proceedings. Vol. 1845.Melville, NY: AIP. , pp.20005. (10.1063/1.4983536)
Dai, Q. et al., 2017. A scheme for rain gauge network design based on remotely sensed rainfall measurements. Journal of Hydrometeorology 18 (2), pp.363-379. (10.1175/JHM-D-16-0136.1)
Dale, M. et al. 2017. External Assessment Centre Report: Peristeen anal irrigation system to manage bowel dysfunction.. Project Report.[Online].NICEAvailable athttps://www.nice.org.uk/guidance/gid-mt511/documents/assessment-report-2.
Dantas, R. 2017. DC grid discriminating protection. PhD Thesis , Cardiff University.
Dantas, R. et al., 2017. Protection strategy for multi-terminal DC networks with fault current blocking capability of converters. Presented at: 13th IET International Conference on AC and DC Power Transmission (ACDC 2017) Manchester, UK 14-16 Feb 2017. AC and DC Power Transmission (ACDC 2017), 13th IET International Conference on. IEEE. , pp.21-26. (10.1049/cp.2017.0021)
Davies, R. and Jefferson, A. 2017. Micromechanical modelling of self-healing cementitious materials. International Journal of Solids and Structures 113-4 , pp.180-191. (10.1016/j.ijsolstr.2017.02.008)
De Nardi, C. et al. 2017. Effectiveness of crystalline admixtures and lime/cement coated granules in engineered self-healing capacity of lime mortars. Materials and Structures 50 (4) 191. (10.1617/s11527-017-1053-3)
De Nardi, C. et al. 2017. Effect of age and level of damage on the autogenous healing of lime mortars. Composites Part B: Engineering 124 , pp.144-157. (10.1016/j.compositesb.2017.05.041)
Demchenko, I. N. et al., 2017. Use of XPS to clarify the Hall coefficient sign variation in thin niobium layers buried in silicon. Applied Surface Science 399 , pp.32-40. (10.1016/j.apsusc.2016.12.028)
Deng, C. et al., 2017. Data cleansing for energy-saving: a case of Cyber-Physical Machine Tools health monitoring system. International Journal of Production Research 56 (1-2), pp.1000-1015. (10.1080/00207543.2017.1394596)
Deng, S. 2017. Introduction of the hybrid tidal system. PhD Thesis , Cardiff University.
Deng, B. et al. 2017. The normal-auxeticity mechanical phase transition in graphene. 2D Materials 4 (2) 21020. (10.1088/2053-1583/aa61e5)
Deng, J. et al. 2017. Numerical evaluation of buckling behaviour induced by compression on patch-repaired composites. Composite Structures 168 , pp.582-596. (10.1016/j.compstruct.2016.12.071)
Deng, X. et al., 2017. A non-oscillatory multi-moment finite volume scheme with boundary gradient switching. Journal of Scientific Computing 72 , pp.1146-1168. (10.1007/s10915-017-0392-0)
Dinesh, C. et al., 2017. Non-intrusive load monitoring under residential solar power influx. Applied Energy 205 , pp.1068-1080. (10.1016/j.apenergy.2017.08.094)
Ding, L. 2017. A theoretical investigation of embedded scintillator optical fibre sensors for use in real-time X-ray and γ-ray dosimetry. PhD Thesis , Cardiff University.
Dong, S. , Lees, J. and Tasker, P. J. 2017. A de-embedding network at higher frequency and its error analysis. Presented at: IEEE International Conference on Electronic Information and Communication Technology (ICEICT) Harbin, China 20-22 Aug 2016. IEEE International Conference on Electronic Information and Communication Technology (ICEICT). IEEE. , pp.512-514. (10.1109/ICEICT.2016.7879754)
Doufene, D. et al., 2017. Polluted insulator optimization using neural network combined with genetic algorithms. Presented at: 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF) Lodz, Poland 14-16 September 2017. 2017 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF) Book of Abstracts. IEEE(10.1109/ISEF.2017.8090689)
Ebdon, T. et al. 2017. Modelling the effects of integral length scale on tidal turbine wakes using advanced turbulence models. Presented at: 152th European Wave and Tidal Energy Conference (EWTEC) Cork, Ireland 27 August - 1 September 2017.
Eblabla, A. M. et al. 2017. GaN on low-resistivity silicon THz high-Q passive device technology. IEEE Transactions on Terahertz Science & Technology 7 (1), pp.93-97. (10.1109/TTHZ.2016.2618751)
Eblabla, A. et al. 2017. Low-loss MMICs viable transmission media for GaN-on-Low resistivity silicon technology. IEEE Microwave and Wireless Components Letters 27 (1), pp.10-12. (10.1109/LMWC.2016.2629964)
Eblabla, A. et al. 2017. Passive components technology for THz-Monolithic Integrated Circuits (THz-MIC). Presented at: 18th International Radar Symposium (IRS), 2017 Prague, Czech Republic 28-30 June 2017. Radar Symposium Conference Proceedings. , pp.1-7. (10.23919/IRS.2017.8008166)
Edwards, P. et al., 2017. Decarbonisation of fossil fuels: Microwave-promoted deep catalytic dehydrogenation of liquid alkanes. Presented at: 254th ACS National Meeting & Exposition Washington, DC, USA 20-24 Aug 2017.
Ehtaiba, M. H. A. 2017. Use of microwave techniques in medical diagnostics and therapy. PhD Thesis , Cardiff University.
El Mountassir, O. et al., 2017. Quantification of the performance of iterative and non-iterative computational methods of locating partial discharges using RF measurement techniques. Electric Power Systems Research 143 , pp.110-120. (10.1016/j.epsr.2016.10.036)
Eldieb, A. 2017. Evaluation of loss generated by edge- burrs in electrical steel. PhD Thesis , Cardiff University.
Erichsen, J. T. et al. 2017. Using the optocollic response to determine visual perception in the homing pigeon (Columba livia) [Abstract]. Perception 46 (10), pp.1230-1231. (10.1177/0301006617710756)
Escamilla‑Ruíz, I. et al., 2017. Experimental data and numerical predictions of a single-phase flow in a batch square stirred tank reactor with a rotating cylinder agitator. Heat and Mass Transfer 53 (9), pp.2933-2949. (10.1007/s00231-017-2030-7)
Fabian-Mijarigos, A. , Min, G. and Alvarez-Quintana, J. 2017. Enhanced performance thermoelectric module having asymmetrical legs. Energy Conversion and Management 148 , pp.1372-1381. (10.1016/j.enconman.2017.06.087)
Faghihirad, S. , Lin, B. and Falconer, R. A. 2017. 3D layer-integrated modelling of morphodynamic processes near river regulated structures. Water Resources Management 31 (1), pp.443-460. (10.1007/s11269-016-1537-x)
Falciglia, P. P. et al., 2017. Remediation of Hg-contaminated marine sediments by simultaneous application of enhancing agents and microwave heating (MWH). Chemical Engineering Journal 321 , pp.1-10. (10.1016/j.cej.2017.03.097)
Fang, H. W. , Liu, Y. and Stoesser, T. 2017. Influence of boulder concentration on turbulence and sediment transport in open-channel flow over submerged boulders. Journal of Geophysical Research: Earth Surface 122 (12), pp.2392-2410. (10.1002/2017JF004221)
Fard, M. A. , Reid, A. and Hepburn, D. M. 2017. Influence of HVDC converter operation on partial discharge characteristics. Presented at: IEEE International Power Modulator and High Voltage Conference (IPMHVC) San Francisco, CA 5-9 July 2016. IEEE. , pp.680-683. (10.1109/IPMHVC.2016.8012893)
Fard, M. A. , Reid, A. and Hepburn, D. 2017. Analysis of HVDC superimposed harmonic voltage effects on partial discharge behavior in solid dielectric media. IEEE Transactions on Dielectrics and Electrical Insulation 24 (1), pp.7-16. (10.1109/TDEI.2016.005934)
Farrell, A. C. et al., 2017. Diode characteristics approaching bulk limits in GaAs nanowire array photodetectors. Nano Letters 17 (4), pp.2420-2425. (10.1021/acs.nanolett.7b00024)
Fasina, E. T. , Oliyide, R. O. and Cipcigan, L. M. 2017. Localised energy systems in Nigerian power network. Presented at: 2017 IEEE 15th International Conference on Industrial Informatics (INDIN) Emden, Germany 24 - 26 July 2017. 2017 IEEE 15th International Conference on Industrial Informatics (INDIN). IEEE. , pp.456-461. (10.1109/INDIN.2017.8104815)
Fernandez-Barciela, M. et al., 2017. Exploiting behavioral modelling formulations for nonlinear analytical circuit design and improved frequency scalability Bandwidth extension through the admittance domain (Invited Paper). Presented at: 2017 IEEE 18th Wireless and Microwave Technology Conference (WAMICON) Cocoa Beach, FL, USA 24-25 April 2017. 2017 IEEE 18th Wireless and Microwave Technology Conference (WAMICON). IEEE. , pp.1-496. (10.1109/WAMICON.2017.7930279)
Foulds, E. , Abeysekera, M. and Wu, J. 2017. Modelling and analysis of a ground source heat pump combined with a PV-T and earth energy storage system. Energy Procedia 142 , pp.886-891. (10.1016/j.egypro.2017.12.142)
Francis, A. et al., 2017. Linear smoothed polygonal and polyhedral finite elements. International Journal for Numerical Methods in Engineering 109 (9), pp.1263-1288. (10.1002/nme.5324)
Freeman, B. 2017. A numerical and experimental investigation into multi-ionic reactive transport behaviour in cementitious materials. PhD Thesis , Cardiff University.
Frost, C. et al. 2017. The impact of axial flow misalignment on a tidal turbine. Renewable Energy 113 , pp.1333-1344. (10.1016/j.renene.2017.07.006)
Gallichan, D. and Marques, J. P. 2017. Optimizing the acceleration and resolution of three-dimensional fat image navigators for high-resolution motion correction at 7T. Magnetic Resonance in Medicine 77 (2), pp.547-558. (10.1002/mrm.26127)
Gardner, D. et al. 2017. Capillary flow characteristics of an autogenic and autonomic healing agent for self-healing concrete. Journal of Materials in Civil Engineering 29 (11), pp.171-184. (10.1061/(ASCE)MT.1943-5533.0002092)
Geng, Y. et al. 2017. AFM tip-based mechanical nanomachining of 3D micro and nano-structures via the control of the scratching trajectory. Journal of Materials Processing Technology 248 , pp.236-248. (10.1016/j.jmatprotec.2017.05.028)
Gersten, B. 2017. A feasibility study in the use of domestic water treatment residuals to remove phosphorus from wastewater. PhD Thesis , Cardiff University.
Ghazwan, A. 2017. Muscle strategies and mechanical loading in patients with osteoarthritis. PhD Thesis , Cardiff University.
Ghazwan, A. et al. 2017. Can activities of daily living contribute to EMG normalization for gait analysis?. PLoS ONE 12 (4) e0174670. (10.1371/journal.pone.0174670)
Ghazwan, A. et al. 2017. Knee loading and neuromuscular activity differs for early and late stage OA. Presented at: XXVI Congress of the International Society of Biomechanics Brisbane, Australia 23-27 July 2017.
Ghazwan, A. et al. 2017. Muscles strategies during different stages of OA. Presented at: XXVI Congress of the International Society of Biomechanics Brisbane, Australia 23-27 July 2017.
Giasin, K. and Ayvar-Soberanis, S. 2017. An Investigation of burrs, chip formation, hole size, circularity and delamination during drilling operation of GLARE using ANOVA. Composite Structures 159 , pp.745-760. (10.1016/j.compstruct.2016.10.015)
Giasin, K. and Ayvar-Soberanis, S. 2017. Microstructural investigation of drilling induced damage in fibre metal laminates constituents. Composites Part A: Applied Science and Manufacturing 97 , pp.166-178. (10.1016/j.compositesa.2017.02.024)
Gibbs, R. , Meydan, T. and Williams, P. 2017. Investigating the three-dimensional structure of stray fields in the boundary layer at micron scale using angled volumetric scanning. Presented at: ISEM 2017 The 18th International Symposium on Applied Electromagnetics and Mechanics Chamonix-Mont-Blanc, France 3-6 September 2017.
Gibbs, R. , Meydan, T. and Williams, P. 2017. Volumetrically scanning the structure of stray-fields above grain-oriented electrical-steel using a variably angled TMR sensor. Presented at: IEEE Sensors 2017 Glasgow, Scotland 29 October - 1 November 2017. Sensors, 2017 IEEE. IEEE
Gibbs, R. , Meydan, T. and Williams, P. 2017. Volumetrically scanning the structure of stray-fields above grain-oriented electrical-steel using a variably angled TMR sensor. Presented at: 2017 IEEE SENSORS Glasgow, Scotland, UK 29 October-1 November 2017. 2017 IEEE Sensors. IEEE(10.1109/ICSENS.2017.8234136)
Giles, A. P. et al. 2017. On flammability hazards from pressurised high-flashpoint liquid releases. Journal of Loss Prevention in the Process Industries 46 , pp.185-194. (10.1016/j.jlp.2017.01.024)
Gleisner, K. S. et al., 2017. Treatment planning for molecular radiotherapy: potential and prospects. European Association of Nuclear MedicineAvailable athttp://www.eanm.org/publications/idtf-report.
Gleisner, K. S. et al., 2017. Variations in the practice of molecular radiotherapy and implementation of dosimetry: results from a European survey. EJNMMI Physics 4 28. (10.1186/s40658-017-0193-4)
Gomes, J. L. M. A. et al., 2017. A force-balanced control volume finite element method for multi-phase porous media flow modelling. International Journal for Numerical Methods in Fluids 83 (5), pp.431-445. (10.1002/fld.4275)
Gong, D. et al., 2017. Mutant reduction based on dominance relation for weak mutation testing. Information and Software Technology 81 , pp.82-96. (10.1016/j.infsof.2016.05.001)
Grant, C. A. et al., 2017. A comparison of vertebral venous networks in adolescent idiopathic scoliosis patients and healthy controls. Surgical and Radiologic Anatomy 39 (3), pp.281-291. (10.1007/s00276-016-1709-7)
Griffiths, D. et al. 2017. Investigating the mechanical properties of case carburised steels. Presented at: BSS 12th International Conference on Advances in Experimental Mechanics Sheffield, UK 29 - 31 August 2017.
Grosvenor, R. , Prickett, P. and He, J. 2017. An assessment of structure-based sensors in the condition monitoring of tidal stream turbines. Presented at: 2017 Twelfth International Conference on Ecological Vehicles and Renewable Energies (EVER) Monte Carlo, Monaco 11-13 April 2017. 2017 Twelfth International Conference on Ecological Vehicles and Renewable Energies (EVER). IEEE(10.1109/EVER.2017.7935942)
Guirdzhiiska, D. , Zlateva, B. and Glavcheva-Laleva, Z. 2017. Polished decorative fields in Thracian fresco tombs from the Hellenistic period - archaeometrical research. Science & Technology of Archaeological Research 3 (2), pp.428-436. (10.1080/20548923.2017.1396723)
Guo, J. et al., 2017. Reliability modelling and evaluation of MMCs. IEEE Transactions on Power Delivery 33 (5), pp.2087-2096. (10.1109/TPWRD.2017.2715664)
Gurung, S. et al. 2017. Modelling the wear process in composite liner bearings. Presented at: 44th Leeds-Lyon Symposium on Tribology Lyon 4-6 September 2017.
Hadi Mosleh, M. et al. 2017. High pressure gas flow, storage, and displacement in fractured rock - experimental setup development and application. Review of Scientific Instruments 88 (1), pp.87-101. 15108. (10.1063/1.4973963)
Hadi Mosleh, M. et al. 2017. Efficiency of carbon dioxide storage and enhanced methane recovery in a high rank coal. Energy and Fuels 31 (12), pp.13892-13900. (10.1021/acs.energyfuels.7b02402)
Hall, J. et al., 2017. Strategic analysis of the future of national infrastructure. Proceedings of the Institution of Civil Engineers - Civil Engineering 170 (1), pp.39-47. (10.1680/jcien.16.00018)
Hamad, A. A. A. et al., 2017. Towards the innovation of an integrated 'one-stop-shop' online services utility management: exploring customer' technology acceptance. Sustainable Cities and Society 34 , pp.126-143. (10.1016/j.scs.2017.06.019)
Hamzah, H. M. 2017. Microwave microfluidic resonant sensors and applicators. PhD Thesis , Cardiff University.
Han, Q. 2017. Selective laser melting of an advanced Al-Al2O3 nanocomposite. PhD Thesis , Cardiff University.
Han, G. et al., 2017. Chlorine-enabled electron doping in solution-synthesized SnSe thermoelectric nanomaterials. Advanced Energy Materials 7 (13) 1602328. (10.1002/aenm.201602328)
Han, Q. et al. 2017. Macro and nanoscale wear behaviour of Al-Al 2 O 3 nanocomposites fabricated by selective laser melting. Composites Part B: Engineering 127 , pp.26-35. (10.1016/j.compositesb.2017.06.026)
Han, Q. , Setchi, R. and Evans, S. L. 2017. Characterisation and milling time optimisation of nanocrystalline aluminium powder for selective laser melting. International Journal of Advanced Manufacturing Technology 88 (5), pp.1429-1438. (10.1007/s00170-016-8866-z)
Han, Q. et al. 2017. Selective laser melting of advanced Al-Al 2 O 3 nanocomposites: simulation, microstructure and mechanical properties. Materials Science and Engineering: A 698 , pp.162-173. (10.1016/j.msea.2017.05.061)
Hande, M. et al., 2017. Biomarkers of ionizing radiation exposure: a multiparametric approach. Genome Integrity 8 (1)(10.4103/2041-9414.198911)
Harbi, Z. 2017. Automatic interpretation of clock drawings for computerised assessment of dementia. PhD Thesis , Cardiff University.
Harbi, Z. , Hicks, Y. and Setchi, R. 2017. Clock drawing test interpretation system. Procedia Computer Science 112 , pp.1641-1650. (10.1016/j.procs.2017.08.259)
Hasan, H. 2017. Characterisation of earthing systems and materials under DC, variable frequency and impulse conditions. PhD Thesis , Cardiff University.
Hatem, F. 2017. Flashback analysis and avoidance in swirl burners. PhD Thesis , Cardiff University.
Hatem, F. A. et al. 2017. Enhancement flame flashback resistance against CIVB and BLF in swirl burners. Energy Procedia 142 , pp.1071-1076. (10.1016/j.egypro.2017.12.358)
Hatem, F. A. et al. 2017. Experimental investigation of the Effect of Air Diffusive injection on premixing swirl flames. Presented at: 55th AIAA Aerospace Sciences Meeting Grapevine, Texas, USA 9 - 13 January 2017. 55th AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, (AIAA 2017-0778). Reston, Va: American Institute of Aeronautics and Astronautics. , pp.1-10. (10.2514/6.2017-0778)
Hatem, F. et al. 2017. Experimental and numerical investigation of the effect of diffusive air injection on turbulence generation and flashback propensity in swirl combustors. Presented at: European Combustion Meeting ECM 2017 Dubrovnik, Croatia 18-21 April 2017.
Hatt, M. et al., 2017. Classification and evaluation strategies of auto-segmentation approaches for PET: report of AAPM task group No. 211. Medical Physics 44 (6), pp.e1-e42. (10.1002/mp.12124)
Hauseux, P. , Hale, J. S. and Bordas, S. P. 2017. Accelerating Monte Carlo estimation with derivatives of high-level finite element models. Computer Methods in Applied Mechanics and Engineering 318 , pp.917-936. (10.1016/j.cma.2017.01.041)
Hauseux, P. , Hale, J. S. and Bordas, S. 2017. Calculating the Malliavin derivative of some stochastic mechanics problems. PLoS ONE 12 (12) e0189994. (10.1371/journal.pone.0189994)
Haynes, M. 2017. RF-IV waveform engineering inspired MMIC design. PhD Thesis , Cardiff University.
Hedges, L. O. , Kim, H. A. and Jack, R. L. 2017. Stochastic level-set method for shape optimisation. Journal of Computational Physics 348 , pp.82. (10.1016/j.jcp.2017.07.010)
Hefford, S. et al. 2017. Monitoring changes in microwave asorption of Ti64 powder during microwave sintering. Presented at: 2017 47th European Microwave Conference (EuMC) Nuremberg, Germany 10-12 October 2017. 2017 47th European Microwave Conference (EuMC). IEEE. , pp.927-929. (10.23919/EuMC.2017.8230997)
Heinen, S. et al., 2017. Unleashing the flexibility of gas: innovating gas systems to meet the electricity system's flexibility requirements. IEEE Power & Energy Magazine 15 (1), pp.16-24. (10.1109/MPE.2016.2621838)
Hejazi, K. 2017. Three-dimensional numerical and physical modelling of coastal hydro-environments: turbulent stratified flows in estuarine harbours and barrages. PhD Thesis , Cardiff University.
Hernandez Madrigal, T. et al. 2017. The effect of solidity on a tidal turbine in low speed flow. Presented at: 12th European Wave and Tidal Energy Conference (EWTEC) Cork, Ireland 27 August - 1 September 2017.
Hernández, J. D. et al. 2017. AUV online mission replanning for gap filling and target inspection. Presented at: IEEE OCEANS 2017 Aberdeen, Scotland 19-22 June 2017. OCEANS 2017 - Aberdeen. IEEE. , pp.1-4. (10.1109/OCEANSE.2017.8084740)
Hickey, B. 2017. Venous blood flow, thromboembolism and below knee cast immobilisation for trauma. MD Thesis , Cardiff University.
Hickey, B. A. et al. 2017. The effect of active toe movement (AToM) on calf pump function and deep vein thrombosis in patients with acute foot and ankle trauma treated with cast - a prospective randomized study. Foot and Ankle Surgery 23 (3), pp.183-188. (10.1016/j.fas.2016.04.007)
Hidalgo San Jose, L. 2017. Microfluidic production of stem-cell microcapsules for spinal cord injury repair. PhD Thesis , Cardiff University.
Holford, K. M. et al. 2017. A new methodology for automating acoustic emission detection of metallic fatigue fractures in highly demanding aerospace environments: An overview. Progress in Aerospace Sciences 90 , pp.1-11. (10.1016/j.paerosci.2016.11.003)
Holt, C. A. et al. 2017. Biomechanical and biological indicators of altered knee loading in pre- High Tibial Osteotomy patients. Presented at: ORS 2017 Annual Meeting San Diego, CA, USA 19-11 March 2017.
Holt, C. A. et al. 2017. Correlating biomechanical and biological indicators of increased medial compartment loading in subjects undergoing knee re-alignment surgery. Presented at: XXVI Congress of the International Society of Biomechanics Brisbane, Australia 23-27 July 2017.
Horrillo-Caraballo, M. J. et al., 2017. The use of data-driven techniques for analyzing meso-scale beach evolution on the Suffolk coast (UK). Presented at: Coastal Dynamics 2017 Helsingør, Denmark 12-16 June 2017.
Hosseini, S. 2017. State estimation of integrated power and gas distribution networks. PhD Thesis , Cardiff University.
Howell, S. K. 2017. Towards a semantic web of things for smart cities. PhD Thesis , Cardiff University.
Howell, S. , Rezgui, Y. and Beach, T. 2017. Integrating building and urban semantics to empower smart water solutions. Automation in Construction 81 , pp.434-448. (10.1016/j.autcon.2017.02.004)
Howell, S. et al. 2017. Towards the next generation of smart grids: semantic and holonic multi-agent management of distributed energy resources. Renewable and Sustainable Energy Reviews 77 , pp.193-214. (10.1016/j.rser.2017.03.107)
Hua, W. et al. 2017. Unit commitment in achieving low carbon smart grid environment with virtual power plant. Presented at: 2017 International Smart Cities Conference (ISC2) Wuxi, China 14-17 September 2017. 2017 International Smart Cities Conference (ISC2). IEEE. , pp.1-6. (10.1109/ISC2.2017.8090810)
Huang, G. , Falconer, R. A. and Lin, B. 2017. Integrated hydro-bacterial modelling for predicting bathing water quality. Estuarine, Coastal and Shelf Science 188 , pp.145-155. (10.1016/j.ecss.2017.01.018)
Huang, G. et al. 2017. Modelling flow in the middle and lower Yangtze River, China. Proceedings of the ICE - Water Management 170 (6), pp.298-309. (10.1680/jwama.15.00123)
Hussain, M. et al. 2017. Structural and magnetic properties of co-nd substituted znfe2o4 ferrites synthesized by co-precipitation technique. Journal of Ovonic Research 13 (2), pp.77-82.
Hutt, S. , Clarke, A. and Evans, H. 2017. Generation of acoustic emission from the running-in and subsequent wear of a mixed-elastohydrodynamic contact. Presented at: 44th Leeds-Lyon Symposium on Tribology Lyon 4-6 September 2017.
Hutt, S. et al. 2017. Use of acoustic emission to determine the lubrication conditions in simulated gear contacts. Presented at: BSSM 12th International Conference on Advances in Experimental Mechanics Sheffield, UK 29 - 31 August 2017.
Inoue, N. 2017. The flow production of Inertial Fusion Energy target-shells using passive, multiphase, channel-based fluidics. PhD Thesis , Cardiff University.
Irfan, M. 2017. Study of the potential impact of onshore Coal Bed Methane production in Wales, as defined within the Petroleum Act 1998, with regard to environmental, social and economic factors. Technical Report.
Irfan, M. et al. 2017. Design and development of a generic spatial decision support system, based on artificial intelligence and multicriteria decision analysis. GeoResJ 14 , pp.47-58. (10.1016/j.grj.2017.08.003)
Ismail, F. and Chizari, H. 2017. Developments of entropy-stable residual distribution methods for conservation laws I: scalar problems. Journal of Computational Physics 330 , pp.1093-1115. (10.1016/j.jcp.2016.10.065)
Ismail, H. A. , Packianather, M. S. and Grosvenor, R. I. 2017. Multi-objective invasive weed optimization of the LQR controller. International Journal of Automation and Computing 14 (3), pp.321-339. (10.1007/s11633-017-1061-3)
Jabi, W. et al. 2017. Enhancing parametric design through non-manifold topology. Design Studies 52 , pp.96-114. (10.1016/j.destud.2017.04.003)
Jameel, A. 2017. Numerical study of two-phase phenomena using OpenFOAM. PhD Thesis , Cardiff University.
Javed, A. et al. 2017. Scalable local energy management systems. Energy Procedia 142 , pp.3069-3074. (10.1016/j.egypro.2017.12.446)
Javed, A. et al. 2017. Fog paradigm for local energy management systems. Presented at: Second EAI International Conference, IISSC 2017 and CN4IoT 2017 Brindisi, Italy 20-21 April 2017. Published in: Longo, A. et al., Cloud Infrastructures Services and IoT Systems for Smart Cities. Vol. 189.Lecture Notes of the Institute for Computer Sciences Social Informatics and Telecommunications Engineering Cham: Springer. , pp.162-176. (10.1007/978-3-319-67636-4_18)
Jenkins, N. and Ekanayake, J. 2017. Renewable energy engineering. Cambridge University Press.
Jenkins, N. and Thornycroft, J. 2017. Grid connection of photovoltaic systems: technical and regulatory issues. In: Kalogirou, S. ed. McEvoy's Handbook of Photovoltaics, Third Edition: Fundamentals and Applications. Academic Press. , pp.847-876.
Ji, H. et al., 2017. A strengthened SOCP-based approach for evaluating the distributed generation hosting capacity with soft open points. Energy Procedia 142 , pp.1947-1952. (10.1016/j.egypro.2017.12.394)
Ji, H. et al., 2017. An enhanced SOCP-based method for feeder load balancing using the multi-terminal soft open point in active distribution networks. Applied Energy 208 , pp.986-995. (10.1016/j.apenergy.2017.09.051)
Ji, S. et al., 2017. Broad tunable photonic microwave generation based on period-one dynamics of optical injection vertical-cavity surface-emitting lasers. Optics Express 25 (17), pp.19863-19871. (10.1364/OE.25.019863)
Ji, S. et al., 2017. Broad tunable photonic microwave source using a single-mode VCSEL subject to parallel optical injection. Presented at: Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC) Munich, Germany 25-29 June 2017. 2017 Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC). IEEE. , pp.1. (10.1109/CLEOE-EQEC.2017.8086553)
Ji, Z. and Huang, Y. 2017. Autonomous boat dynamics: How far away is simulation from the high sea?. Presented at: OCEANS 2017 Aberdeen 19 - 22 June 2017. OCEANS 2017 - Aberdeen. IEEE(10.1109/OCEANSE.2017.8084927)
Jiang, C. , Pan, S. and Chen, S. 2017. Recent morphological changes of the Yellow River (Huanghe) submerged delta: Causes and environmental implications. Geomorphology 293 , pp.93-107. (10.1016/j.geomorph.2017.04.036)
Jiang, S. et al., 2017. All-GaN-integrated cascode heterojunction field effect transistors. IEEE Transactions on Power Electronics 32 (11), pp.8743-8750. (10.1109/TPEL.2016.2643499)
Jie, X. et al., 2017. Rapid production of high-purity hydrogen fuel through microwave-promoted deep catalytic dehydrogenation of liquid alkanes with abundant metals. Angewandte Chemie International Edition 56 (34), pp.10170-10173. (10.1002/anie.201703489)
Jin, X. et al. 2017. Dynamic economic dispatch of a hybrid energy microgrid considering building based virtual energy storage system. Applied Energy 194 , pp.386-398. (10.1016/j.apenergy.2016.07.080)
Jin, X. et al. 2017. Hierarchical microgrid energy management in an office building. Applied Energy 208 , pp.480-494. (10.1016/j.apenergy.2017.10.002)
Jin, Y. et al., 2017. Error-controlled adaptive extended finite element method for 3D linear elastic crack propagation. Computer Methods in Applied Mechanics and Engineering 318 , pp.319-348. (10.1016/j.cma.2016.12.016)
Jing, R. et al. 2017. Multi-criteria evaluation of solid oxide fuel cell based combined cooling heating and power (SOFC-CCHP) applications for public buildings in China. Energy 141 , pp.273-289. (10.1016/j.energy.2017.08.111)
Jing, R. et al. 2017. Economic and environmental multi-optimal design and dispatch of solid oxide fuel cell based CCHP system. Energy Conversion and Management 154 , pp.365-379. (10.1016/j.enconman.2017.11.035)
Jing, R. et al. 2017. A study on energy performance of 30 commercial office buildings in Hong Kong. Energy and Buildings 144 , pp.117-128. (10.1016/j.enbuild.2017.03.042)
Johansson, M. and O'Doherty, T. 2017. Feasibility of micro-hydro schemes in South Glamorgan, Wales. Energy Procedia 142 , pp.309-314. (10.1016/j.egypro.2017.12.049)
Joldes, G. R. et al., 2017. A new method for essential boundary conditions imposition in explicit meshless methods. Engineering Analysis with Boundary Elements 80 , pp.94-104. (10.1016/j.enganabound.2017.03.011)
Joldes, G. R. et al., 2017. BioPARR: A software system for estimating the rupture potential index for abdominal aortic aneurysms. Scientific Reports 7 4641. (10.1038/s41598-017-04699-1)
Jones, M. et al., 2017. Dielectric and structural characterisation of ammonia uptake by metal organic framework materials. Presented at: 254th ACS National Meeting & Exposition Washington, DC, USA 20-24 Aug 2017.
Jones, M. et al. 2017. Development and validation of a physical model to investigate the biomechanics of infant head impact. Forensic Science International 276 , pp.111-119. (10.1016/j.forsciint.2017.03.025)
Jones, P. et al., 2017. Detecting muscle activity in knee osteoarthritis patients during gait: the role of quiet standing in the Teager-Kaiser energy operator method. Presented at: XXVI Congress of the International Society of Biomechanics Brisbane, Australia 23-27 July 2017.
Jose, K. F. et al. 2017. Inertial contribution from large scale variable-speed wind turbines connected to the GB grid. Presented at: 13th IET International Conference on AC and DC Power Transmission (ACDC 2017) Manchester, UK 14-16 February 2017. 13th IET International Conference on AC and DC Power Transmission (ACDC 2017). , pp.64 -66. (10.1049/cp.2017.0064)
Joseph, T. 2017. Operation and control of voltage source converters in transmission networks for AC system stability enhancement. PhD Thesis , Cardiff University.
Joseph, T. et al. 2017. Wind-thermal generation coordination in multi-terminal HVDC-connected AC systems for improved frequency support. Presented at: 13th IET International Conference on AC and DC Power Transmission (ACDC 2017) Manchester 14-16 February 2017. 13th IET International Conference on AC and DC Power Transmission (ACDC 2017). IET. , pp.58 -64. (10.1049/cp.2017.0058)
Kadri, U. et al. 2017. Rewinding the waves: tracking underwater signals to their source. Scientific Reports 7 (1) 13949. (10.1038/s41598-017-14177-3)
Kamarudin, M. S. et al., 2017. Purpose-built test rig for gas insulation breakdown tests under lightning impulse. Presented at: IEEE 6th International Conference on Power and Energy (PECON 2016) Melaka, Malaysia 28-29 November 2016. 2016 IEEE International Conference on Power and Energy (PECon). IEEE. , pp.333-337. (10.1109/PECON.2016.7951583)
Kamarudin, M. et al., 2017. Pressurized CF3I-CO2 gas mixture under lightning impulse and its solid by-products. International Journal of Electrical and Computer Engineering (IJECE) 7 (6), pp.3088-3094. (10.11591/ijece.v7i6.pp3088-3094)
Kandasamy, J. 2017. Can infant CPR performance be improved through the provision of 'real time' feedback?. PhD Thesis , Cardiff University.
Karras, K. et al. 2017. Damage detection of a composite bearing liner using Acoustic Emission.. Presented at: BSSM 12th International Conference on Advances in Experimental Mechanics Sheffield, UK 21 - 31 August 2017.
Keenan, B. et al. 2017. Sequential magnetic resonance imaging reveals individual level deformities of vertebrae and discs in the growing scoliotic spine. Spine Deformity 5 (3), pp.197-207. (10.1016/j.jspd.2016.10.002)
Kelly, P. T. et al., 2017. Ecological dissertations in the aquatic sciences: an effective networking and professional development opportunity for early career aquatic scientists. Limnology and Oceanography Bulletin 26 (2), pp.25-30. (10.1002/lob.10180)
Kelsey, L. et al., 2017. A comparison of hemodynamic metrics and intraluminal thrombus burden in a common iliac artery aneurysm. International Journal for Numerical Methods in Biomedical Engineering 33 (5) e2821. (10.1002/cnm.2821)
Khairuddin, N. A. M. and Cipcigan, L. M. 2017. Optimal placement and capacity of distributed generators in medium voltage generic UK network. Presented at: 2016 51st International Universities Power Engineering Conference (UPEC) Coimbra, Portugal 6-9 September 2016. 2016 51st International Universities Power Engineering Conference (UPEC), Proceedings. IEEE. , pp.1. (10.1109/UPEC.2016.8114027)
Khajah, M. 2017. Engineering aspects, pathways and mechanisms of nitrogen removal in engineered wetland systems. PhD Thesis , Cardiff University.
Khatib, N. et al., 2017. The functional characterization of a knee focal cartilage defect cohort. Presented at: XXVI Congress of the International Society of Biomechanics Brisbane, Australia 23-27 July 2017.
Khaustov, S. , Clarke, A. and Evans, H. 2017. Elastohydrodynamic lubrication and surface fatigue modelling of spur gears over the meshing cycle. Presented at: 44th Leeds-Lyon Symposium on Tribology Lyon 4-6 September 2017.
Kiiza, C. 2017. Design and modelling of pollutant removal in stormwater constructed wetlands. PhD Thesis , Cardiff University.
Kim, H. H. M. et al., 2017. Special Issue: Data-Driven Design (D3). Journal of Mechanical Design 139 (11) 110301. (10.1115/1.4037943)
Kim, H. et al., 2017. Telecom-wavelength bottom-up nanobeam lasers on silicon-on-insulator. Nano Letters 17 (9), pp.5244-5250. (10.1021/acs.nanolett.7b01360)
Kim, H. et al., 2017. Monolithic InGaAs nanowire array lasers on silicon-on-insulator operating at room temperature. Nano Letters 17 (6), pp.3465-3470. (10.1021/acs.nanolett.7b00384)
King, J. et al. 2017. Modelling the impact of microbial sources on water quality: a study on the designated sampling point in Swansea bay, UK. Presented at: 37th IAHR World Congress Kuala Lumpur, Malaysia 13-18 August 2017. , pp.-.
Krzma, A. S. , Albano, M. and Haddad, A. 2017. Flashover influence of fog rate on the characteristics of polluted silicone-rubber insulators. Presented at: 52nd International Universities Power Engineering Conference (UPEC) Heraklion, Greece 28-31 August 2017. 2017 52nd International Universities Power Engineering Conference (UPEC). IEEE. , pp.1-5. (10.1109/UPEC.2017.8231958)
Kulasegaram, S. and Karihaloo, B. 2017. Recent developments in modelling self-compacting concrete flow using smooth particle hydrodynamics method. Presented at: PARTICLES 2017 V International Conference on Particle-Based Methods. Fundamentals and Applications, Hannover, Germany. 26-28 September 2017. , pp.-.
Kundu, A. et al. 2017. Acoustic emission based damage localization in composites structures using Bayesian identification. Journal of Physics. Conference Series 842 , pp.12081. (10.1088/1742-6596/842/1/012081)
Kurji, H. 2017. Fuel flexibility with low emissions for gas turbine engines. PhD Thesis , Cardiff University.
Kurji, H. et al. 2017. Combustion and emission performance of CO2/CH4/biodiesel and CO2/CH4/diesel blends in a Swirl Burner Generator. Energy Procedia 142 , pp.154-159. (10.1016/j.egypro.2017.12.025)
Kuster, C. , Rezgui, Y. and Mourshed, M. 2017. Electrical load forecasting models: a critical systematic review. Sustainable Cities and Society 35 , pp.257-270. (10.1016/j.scs.2017.08.009)
Kvocka, D. 2017. Modelling elevations, inundation extent and hazard risk for extreme flood events. PhD Thesis , Cardiff University.
Kvočka, D. , Ahmadian, R. and Falconer, R. 2017. Flood inundation modelling of flash floods in steep river basins and catchments. Water 9 (9) 705. (10.3390/w9090705)
Lafaia, I. et al., 2017. Experimental and theoretical analysis of cable discharge. IEEE Transactions on Power Delivery 32 (4), pp.2022-2030. (10.1109/TPWRD.2016.2602361)
Lafta, H. A. et al., 2017. Kinematic analysis of the shoulder mechanism in able-bodied non-experienced manual wheelchair users. Presented at: 2016 International Conference for Students on Applied Engineering (ICSAE) 20-21 October 2016. International Conference for Students on Applied Engineering (ICSAE). IEEE. , pp.286-290. (10.1109/ICSAE.2016.7810204)
Lan, L. , Liu, Y. and Lu, W. F. 2017. Automatic discovery of design task structure using deep belief nets. Journal of Computing and Information Science in Engineering 17 (4) 41001. (10.1115/1.4036198)
Langdon-Jones, E. E. et al., 2017. Luminescent 1,8-Naphthalimide-Derived ReI Complexes: syntheses, spectroscopy, X-ray structure and preliminary bioimaging in fission yeast cells. European Journal of Inorganic Chemistry 2017 (44), pp.5279-5287. (10.1002/ejic.201700549)
Le, C. H. et al., 2017. Customer driven mass-customisation and innovative product development with parametric design & generative modeling. Presented at: 15th International Conference on Manufacturing Research London, UK 5-7 September 2017. Advances in Manufacturing Technology XXXI. Vol. 6.Advances in Transdisciplinary Engineering London: IOS Press. , pp.415 - 420. (10.3233/978-1-61499-792-4-415)
Lee, H. K. H. et al., 2017. Organic photovoltaic cells - promising indoor light harvesters for self-sustainable electronics. Journal of Materials Chemistry A 6 (14), pp.5618-5626. (10.1039/C7TA10875C)
Lee, P. Y. et al. 2017. Unloading knee brace is a cost-effective method to bridge and delay surgery in unicompartmental knee arthritis. BMJ Open Sport and Exercise Medicine 2 e000195. (10.1136/bmjsem-2016-000195)
Lee, C. et al. 2017. Strain smoothing for compressible and nearly-incompressible finite elasticity. Computers & Structures 182 , pp.540-555. (10.1016/j.compstruc.2016.05.004)
Lee, C. H. et al., 2017. A variationally consistent streamline upwind Petrov-Galerkin smooth particle hydrodynamics algorithm for large strain solid dynamic. Computer Methods in Applied Mechanics and Engineering 318 , pp.514-536. (10.1016/j.cma.2017.02.002)
Lee, J. P. et al., 2017. Electrically driven and electrically tunable quantum light sources. Applied Physics Letters 110 (7) 71102. (10.1063/1.4976197)
Lee, P. et al. 2017. 3D computer modeling analysis of the surface area and thread volume of the common sliding hip screw. Orthopedics and Rheumatology 5 (1), pp.1-5. 555653. (10.19080/OROAJ.2017.05.555653)
Lei, S. , Zheng, X. Y. and Kennedy, D. 2017. Dynamic response of a deepwater riser subjected to combined axial and transverse excitation by the nonlinear coupled model. International Journal of Non-Linear Mechanics 97 , pp.68-77. (10.1016/j.ijnonlinmec.2017.09.001)
Leichauer, P. 2017. Design and development of lightning waveform generators. PhD Thesis , Cardiff University.
Lewis, N. J. 2017. Prediction of the effect of building factors on the magnetic performance of electrical steels in automotive applications. PhD Thesis , Cardiff University.
Lewis, M. et al., 2017. Influence of storm surge on tidal range energy. Energy 122 , pp.25-36. (10.1016/j.energy.2017.01.068)
Li, C. 2017. The protection and interconnection of HVDC grids. PhD Thesis , Cardiff University.
Li, C. , Wang, S. and Liang, J. 2017. Dual-circuit hybrid circuit breaker. Presented at: 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe) Warsaw, Poland 11-14 September 2017. 2017 19th European Conference on Power Electronics and Applications. IEEE(10.23919/EPE17ECCEEurope.2017.8099056)
Li, C. , Wang, S. and Liang, J. 2017. Switch yard and isolation control design for DC/AC/DC converter operating at power reversal condition in LCC-HVDC system. Presented at: 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe) Warsaw, Poland 11-14 September 2017. 2017 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe). IEEE(10.23919/EPE17ECCEEurope.2017.8098981)
Li, D. et al., 2017. Multiobjective optimization for carbon market scheduling based on behavior learning. Presented at: 9th International Conference on Applied Energy (ICAE2017) Cardiff, Wales 21-24 August 2017. Vol. 142.Elsevier. , pp.2089-2094. (10.1016/j.egypro.2017.12.581)
Li, G. 2017. Analysis and protection of HVDC systems subject to AC and DC faults. PhD Thesis , Cardiff University.
Li, G. et al. 2017. Analysis of single-phase-to-ground faults at the valve-side of HB-MMCs in bipolar HVDC systems. Presented at: 2017 IEEE Energy Conversion Congress and Exposition (ECCE) Cincinnati, OH 1-5 October 2017. , pp.2659. (10.1109/ECCE.2017.8096501)
Li, H. and Hartmann, T. 2017. Computing advances applied for building design, operation, retrofit and supply chain information processing. Advanced Engineering Informatics 31 (1), pp.1-1. (10.1016/j.aei.2016.07.002)
Li, J. and Barrow, D. A. 2017. A new droplet-forming fluidic junction for the generation of highly compartmentalised capsules. Lab on a Chip 17 (16), pp.2873-2881. (10.1039/c7lc00618g)
Li, J. et al. 2017. Formation of chemically responsive multisomes using droplet microfluidics. Presented at: 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2016) Dublin, Ireland 9-13 October 2016. Proceedings of the 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2016). Red Hook, NY: Curran Associates, Inc.
Li, J. et al. 2017. Assessment of tropical cyclones in Ecmwf Reanalysis Data over Northwest Pacific Ocean. Presented at: 27th International Ocean and Polar Engineering Conference San Francisco, USA 25-30 Jun 2017. The 27th International Ocean and Polar Engineering Conference. Vol. 2017.International Society of Offshore and Polar Engineers. , pp.-.
Li, J. et al. 2017. Continuous and scalable polymer capsule processing for inertial fusion energy target shell fabrication using droplet microfluidics. Scientific Reports 7 6302. (10.1038/s41598-017-06746-3)
Li, J. et al. 2017. An automated system for the shape optimization of double emulsion droplets used in the fabrication of Inertial Fusion Energy target shells. Presented at: The 21st International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2017) Cardiff 22-26 October 2017.
Li, P. et al., 2017. A coordinated control method of voltage and reactive power for active distribution net-works based on soft open point. IEEE Transactions on Sustainable Energy 8 (4), pp.1430-1442. (10.1109/TSTE.2017.2686009)
Li, Q. et al. 2017. Constrained interpolation profile conservative semi-Lagrangian scheme based on third-order polynomial functions and essentially non-oscillatory (CIP-CSL3ENO) scheme. Communications in Computational Physics 22 (3), pp.765-788. (10.4208/cicp.OA-2016-0117)
Li, Q. and Yokoi, K. 2017. Numerical simulations of multiphase flows using the CIP-CSL3ENO scheme. Presented at: The 3rd International Conference on Numerical Methods in Multiphase Flows Tokyo, Japan June 26-29, 2017.
Li, W. et al., 2017. Multiphysics simulations of thermoelectric generator modules with cold and hot blocks and effects of some factors. Case Studies in Thermal Engineering 10 , pp.63-72. (10.1016/j.csite.2017.03.005)
Li, W. et al., 2017. A coupled optical-thermal-electrical model to predict the performance of hybrid PV/T-CCPC roof-top systems. Renewable Energy 112 , pp.166-186. (10.1016/j.renene.2017.05.012)
Li, W. et al., 2017. A scaling law for monocrystalline PV/T modules with CCPC and comparison with triple junction PV cells. Applied Energy 202 , pp.755-771. (10.1016/j.apenergy.2017.05.182)
Li, Y. et al., 2017. Design charts for contaminant transport through slurry trench cutoff walls. Journal of Environmental Engineering 143 (9) 10.1061/(ASCE)EE.1943-7870.0001253. (10.1061/(ASCE)EE.1943-7870.0001253)
Li, Y. and Cleall, P. 2017. Slurry trench. In: Bobrowsky, P. and Marker, B. eds. Encyclopedia of Engineering Geology. Encyclopedia of Earth Sciences Series Springer International Publishing. , pp.1-2. (10.1007/978-3-319-12127-7_264-1)
Li, Y. and Rezgui, Y. 2017. A novel concept to measure envelope thermal transmittance and air infiltration using a combined simulation and experimental approach. Energy and Buildings 140 , pp.380-387. (10.1016/j.enbuild.2017.02.036)
Li, Y. , Rezgui, Y. and Zhu, H. 2017. District heating and cooling optimization and enhancement – towards integration of renewables, storage and smart grid. Renewable and Sustainable Energy Reviews 72 , pp.281-294. (10.1016/j.rser.2017.01.061)
Lian, H. , Kerfriden, P. and Bordas, S. 2017. Shape optimization directly from CAD: an isogeometric boundary element approach using T-splines. Computer Methods in Applied Mechanics and Engineering 317 , pp.1-41. (10.1016/j.cma.2016.11.012)
Lian, J. et al., 2017. Air entrainment and air demand in the spillway tunnel at the Jinping-I dam. Applied Sciences 7 (9) 930. (10.3390/app7090930)
Liang, Y. , Meng, Q. and Chang, S. 2017. Fault diagnosis and energy consumption analysis for variable air volume air conditioning system: a case study. Procedia Engineering 205 , pp.834-841. (10.1016/j.proeng.2017.10.021)
Liang, H. et al., 2017. Research on reactive power optimization of distribution network with DG considering UPFC based on dynamic partition. Presented at: 5th IET International Conference on Renewable Power Generation (RPG) 2016 London, UK 21-23 September 2016. 5th IET International Conference on Renewable Power Generation (RPG) 2016. IET(10.1049/cp.2016.0583)
Lin, W. et al., 2017. Multi-objective optimal hybrid power flow algorithm for integrated local area energy system. Proceedings of the CSEE: Smart Grid 37 (20), pp.5829-5839. (10.13334/j.0258-8013.pcsee.161886)
Lin, X. and Zhu, H. 2017. Numerical simulation for the yield behaviour of stochastic fibre reinforced composites with overlap. Presented at: The 3rd International Conference on Mechanics of Composites Bologna, Italy 4-7, July 2017.
Liu, C. et al. 2017. Augmented Reality-assisted Intelligent Window for Cyber-Physical Machine Tools. Journal of Manufacturing Systems 44 , pp.280-286. (10.1016/j.jmsy.2017.04.008)
Liu, B. et al., 2017. Microwaves effectively examine the extent and type of coking over acid zeolite catalysts. Nature Communications 8 514. (10.1038/s41467-017-00602-8)
Liu, C. and Xu, X. 2017. Cyber-physical machine tool - The era of machine tool 4.0. Procedia CIRP 63 , pp.70-75. (10.1016/j.procir.2017.03.078)
Liu, J. et al., 2017. Mechanical manipulation of magnetic nanoparticles by magnetic force microscopy. Journal of Magnetism and Magnetic Materials 443 , pp.184-189. (10.1016/j.jmmm.2017.07.069)
Liu, J. et al. 2017. Optimized setup and protocol for magnetic domain imaging with in situ hysteresis measurement. Journal of Visualized Experiments 2017 (129) e56376. (10.3791/56376)
Liu, S. et al., 2017. Correlation between acoustic emission distribution and stress variation through the depth of RC beam cross sections. Construction and Building Materials 150 , pp.634-645. (10.1016/j.conbuildmat.2017.06.001)
Liu, S. et al., 2017. BIM supported collaborative design and application for waterway infrastructure. China Harbour Engineering 37 (10), pp.1-7.
Liu, Y. et al., 2017. Turbulent flow over an array of boulders placed on a rough, permeable bed. Computers & Fluids 158 , pp.120-132. (10.1016/j.compfluid.2017.05.023)
Long, C. et al. 2017. MVDC link in a 33 kV distribution network. CIRED - Open Access Proceedings Journal , pp.1308-1312. (10.1049/oap-cired.2017.0168)
Long, C. et al. 2017. Feasibility of peer-to-peer energy trading in low voltage electrical distribution networks. Energy Procedia 105 , pp.2227-2232. (10.1016/j.egypro.2017.03.632)
Long, S. and Li, H. 2017. Using BIM throughout the occupancy of residential buildings to benefit homeowners: A roadmap to viability. Presented at: 24th International Workshop on Intelligent Computing in Engineering 10 - 12 July 2017. Published in: Koch, C. , Tizani, W. and Ninic, J. eds. 24th EG-ICE International Workshop on Intelligent Computing in Engineering (EG-ICE 2017). European Group for Intelligent Computing in Engineering. , pp.188-197.
Lucas, R. and Babatunde, A. O. 2017. Influence of key design and operating variables on synamics of pollutant removal in experimental stormwater constructed wetlands. Journal of Environmental Engineering 143 (7) 4017015. (10.1061/(ASCE)EE.1943-7870.0001181)
Maddalena, R. and Hamilton, A. 2017. Low-pressure silica injection for porosity reduction in cementitious materials. Construction and Building Materials 134 , pp.610-616. (10.1016/j.conbuildmat.2016.11.016)
Mandal, S. et al. 2017. Surface zeta potential and diamond seeding on gallium nitride films. ACS Omega 2 (10), pp.7275-7280. (10.1021/acsomega.7b01069)
Manguri, A. A. , Kwan, A. S. K. and Saeed, N. M. 2017. Adjustment for shape restoration and force control of cable arch stayed bridges. International Journal of Computational Methods and Experimental Measurements 5 (4), pp.514-521. (10.2495/CMEM-V5-N4-514-521)
Marks, R. et al. 2017. Optimization of acousto-ultrasonic sensor networks using genetic algorithms based on experimental and numerical datasets. International Journal of Distributed Sensor Networks 13 (11)(10.1177/1550147717743702)
Marks, R. et al. 2017. Damage detection in a composite wind turbine blade using 3D scanning laser vibrometry. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 231 (16), pp.3024-3041. (10.1177/0954406216679612)
Marmaras, C. 2017. Charging of electric vehicles at commercial buildings. PhD Thesis , Cardiff University.
Marmaras, C. et al. 2017. Predicting the energy demand of buildings during triad peaks in GB. Energy and Buildings 141 , pp.262-273. (10.1016/j.enbuild.2017.02.046)
Marmaras, C. et al., 2017. A cloud-based energy management system for building managers. Presented at: 8th ACM/SPEC on International Conference on Performance Engineering Companion L'Aquila, Italy 22-26 April 2017. ICPE '17: Companion Proceedings of the 8th ACM/SPEC on International Conference on Performance Engineering Companion. Association for Computing Machinery. , pp.61-66. (10.1145/3053600.3053613)
Marmaras, C. , Xydas, E. and Cipcigan, L. 2017. Simulation of electric vehicle driver behaviour in road transport and electric power networks. Transportation Research Part C: Emerging Technologies 80 , pp.239-256. (10.1016/j.trc.2017.05.004)
Martínez-Ayuso, G. et al., 2017. Energy harvesting using porous piezoelectric beam with impacts. Procedia Engineering 199 , pp.3468-3473. (10.1016/j.proeng.2017.09.454)
Martínez-Pañeda, E. , Natarajan, S. and Bordas, S. 2017. Gradient plasticity crack tip characterization by means of the extended finite element method. Computational Mechanics 59 (5), pp.831-842. (10.1007/s00466-017-1375-6)
Mastrolembo, G. 2017. Understanding and optimising parameters for lightning strike testing of CFRP materials. PhD Thesis , Cardiff University.
McGlinn, K. et al., 2017. Usability evaluation of a web-based tool for supporting holistic building energy management. Automation in Construction 84 , pp.154-165. (10.1016/j.autcon.2017.08.033)
McSherry, R. J. , Chua, K. V. and Stoesser, T. 2017. Large eddy simulation of free-surface flows. Journal of Hydrodynamics 29 (1), pp.1-12. (10.1016/S1001-6058(16)60712-6)
McWhirter, J. and Wang, Z. 2017. A novel insight to the SBR2 algorithm for diagonalising Para-Hermitian matrices. Presented at: 11th IMA International Conference on Mathematics in Signal Processing Birmingham, UK 12 – 14 December 2016. 11th IMA International Conference on Mathematics in Signal Processing.
Meng, Q. and Mourshed, M. 2017. Degree-day based non-domestic building energy analytics and modelling should use building and type specific base temperatures. Energy and Buildings 155 , pp.260-268. (10.1016/j.enbuild.2017.09.034)
Metcalfe, A. J. et al., 2017. Abnormal loading and functional deficits are present in both limbs before and after unilateral knee arthroplasty. Gait and Posture 55 , pp.109-115. (10.1016/j.gaitpost.2017.04.008)
Mihai, I. C. and Jefferson, A. D. 2017. A micromechanics based constitutive model for fibre reinforced cementitious composites. International Journal of Solids and Structures 110-11 , pp.152-169. (10.1016/j.ijsolstr.2017.01.032)
Ming, W. and Zhong, Q. 2017. Current-stress reduction for the neutral inductor of θ - converters. IEEE Transactions on Power Electronics 32 (4), pp.2794-2807. (10.1109/TPEL.2016.2581201)
Mitchard, D. et al. 2017. Investigation of lightning direct effects on aircraft materials. Presented at: 2016 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) Toulouse, France 2-4 November 2016. 2016 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC). IEEE(10.1109/ESARS-ITEC.2016.7841393)
Mitchard, D. et al. 2017. Investigation of the effect of initiation wires on lighting arcs using spectral and high-speed imaging techniques. Presented at: International Symposium on High Voltage Engineering Winc Aichi, Nagoya, Aichi, Japan 13 - 15 September 2017.
Mitchard, D. et al. 2017. Method for recording broadband high resolution emission spectra of laboratory lightning arcs. Journal of Visualized Experiments 150 e56336. (10.3791/56336)
Mitchard, D. et al. 2017. Experimental and theoretical evaluation of aluminium deflection due to lightning strikes. Presented at: 19th International Conference on Lightning Protection Dubai, UAE 30 - 31 January 2017.
Mo, L. et al., 2017. Accelerated carbonation and performance of concrete made with steel slag as binding materials and aggregates. Cement and Concrete Composites 83 , pp.138-145. (10.1016/j.cemconcomp.2017.07.018)
Mobarek, H. 2017. A numerical and experimental study of near surface ground energy systems including the use of adaptable insulation layer. PhD Thesis , Cardiff University.
Mohammed, A. 2017. Development of an engineered wetland system for sustainable landfill leachate treatment. PhD Thesis , Cardiff University.
Mohammed, A. and Babatunde, A. O. 2017. Modelling heavy metals transformation in vertical flow constructed wetlands. Ecological Modelling 354 , pp.62-71. (10.1016/j.ecolmodel.2017.03.012)
Mohammed, A. et al. 2017. Drafting a fuzzy TOPSIS-multi-objective approach for a sustainable supplier selection. Presented at: 2017 23rd International Conference on Automation and Computing (ICAC) Huddersfield 7 - 8 September 2017. , pp.-.
Mohammed, A. et al. 2017. Drafting a fuzzy TOPSIS-multi-objective approach for a sustainable supplier selection. Presented at: 23rd International Conference on Automation & Computing (ICAC 2017) Huddersfield, England 7-8 September 2017. Proceedings of the 23rd International Conference on Automation & Computing. IEEE. , pp.1. (10.23919/IConAC.2017.8082017)
Mohammed, A. , Wang, Q. and Li, X. 2017. A cost-effective decision-making algorithm for an RFID-enabled HMSC network design: a multi-objective approach. Industrial Management and Data Systems 117 (9), pp.1782-1799. (10.1108/IMDS-02-2016-0074)
MohdTadza, M. Y. , Mahazam, N. and Tripathy, S. 2017. An evaluation of osmotic technique under ultraviolet germicidal irradiation exposure. International Journal of GEOMATE 12 (32), pp.30-36. (10.21660/2017.32.6578)
Mohsin, M. M. , Beach, T. and Kwan, A. 2017. Public perceptions of urban sustainable challenges in developing countries. Presented at: Sustainable Development and Planning 2018 Siena, Italy 4-6 September 2018. Published in: Brebbia, C. A. et al., Sustainable Development and Planning IX. Vol. 226.WIT Transactions on Ecology and the Environment Southampton: WIT Press. , pp.131-140. (10.2495/SDP170121)
Momot, A. et al., 2017. A novel explanation for the increased conductivity in annealed Al-doped ZnO: an insight into migration of aluminum and displacement of zinc. Physical Chemistry Chemical Physics 19 , pp.27866-27877. (10.1039/C7CP02936E)
Moreno, J. J. and Angarita, E. F. 2017. A wideband output matching network for Doherty Power Amplifier applications. Presented at: Microwave Conference (EuMC), 2016 46th European London, UK 4-6 Oct 2016. 2016 46th European Microwave Conference (EuMC). IEEE. , pp.851. (10.1109/EuMC.2016.7824477)
Moreton, G. , Meydan, T. and Williams, P. 2017. Investigation and characterization of a planar figure-of-eight coil as a curvature sensor. Presented at: 2017 IEEE SENSORS Glasgow, Scotland, UK 29 Oct - 1 Nov 2017. 2017 IEEE SENSORS. IEEE. , pp.786-788. (10.1109/ICSENS.2017.8234138)
Morris, A. 2017. Product change management: to improve the through-life management of high-value, long-life products. PhD Thesis , Cardiff University.
Morrison, E. et al. 2017. Loadings on a tidal turbine during installation using CFD modelling. Presented at: 12th European Wave and Tidal Energy Conference (EWTEC) Cork, Ireland 27 August - 1 September 2017.
Moses, A. J. et al. 2017. Relevance of microstructure and texture to the accuracy and interpretation of 1 and 2 directional characterisation and testing of grain-oriented electrical steels. International Journal of Applied Electromagnetics and Mechanics 55 (S1), pp.3-13. (10.3233/JAE-172252)
Mu, Q. et al., 2017. Systematic evaluation for multi-rate simulation of DC Grids. International Journal of Electrical Power and Energy Systems 93 , pp.119-134. (10.1016/j.ijepes.2017.05.020)
Muaaz-Us-Salam, S. , Cleall, P. and Harbottle, M. 2017. Enhanced delignification and methane generation in waste repositories-overcoming heterogeneity. Presented at: Proceedings Sardinia 2017 / Sixteenth International Waste Management and Landfill Symposium S. Margherita di Pula, Cagliari, Italy 2 - 6 October 2017. , pp.-.
Muhssin, M. T. et al. 2017. A novel adaptive deadbeat- based control for load frequency control of low inertia system in interconnected zones north and south of Scotland. International Journal of Electrical Power and Energy Systems 89 , pp.52-61. (10.1016/j.ijepes.2016.12.005)
Muhssin, M. et al. 2017. Load aggregation over a time of day to provide frequency response in the Great Britain power system. Energy Procedia 142 , pp.2177-2182. (10.1016/j.egypro.2017.12.585)
Mukhtar, N. F. H. 2017. Characterisation of tip wear during AFM probe-based nanomachining. PhD Thesis , Cardiff University.
Mulahasan, S. and Stoesser, T. 2017. Flow resistance of in-line vegetation in open channel flow. International Journal of River Basin Management 15 (3), pp.329-334. (10.1080/15715124.2017.1307847)
Mulahasan, S. , Stoesser, T. and McSherry, R. 2017. Effect of floodplain obstructions on the discharge conveyance capacity of compound channels. Journal of Irrigation and Drainage Engineering 143 (11) 4017045. (10.1061/(ASCE)IR.1943-4774.0001240)
Munoz Criollo, J. , Cleall, P. and Harbottle, M. 2017. Coupled biomass growth and flow in unsaturated soil. Presented at: International Symposium on Coupled Phenomena in Environmental Geotechnics University of Leeds 6 - 7 September 2017.
Murariu, A. C. , Cernescu, A. V. and Perianu, I. 2017. The effect of saline environment on the fatigue behaviour of HVOF-sprayed WC-CrC-Ni coatings. Surface Engineering 34 (10), pp.755-761. (10.1080/02670844.2017.1388561)
Mutasa, K. 2017. Analysis and optimisation of soft electroactive laminated composites. MPhil Thesis , Cardiff University.
Nawir, M. 2017. Integration of wind farms into weak AC grid. PhD Thesis , Cardiff University.
Newell, N. et al., 2017. A comparison of four techniques to measure anterior and posterior vertebral body heights and sagittal plane wedge angles in adolescent idiopathic scoliosis. Medical & Biological Engineering & Computing 55 (4), pp.561-572. (10.1007/s11517-016-1520-y)
Nguyen, V. B. et al., 2017. Recent advances in experimental testing and computational modelling for characterisation of mechanical properties of biomaterials and biological cells. Presented at: BME 2017: International Conference on the Development of Biomedical Engineering in Vietnam Ho Chi Minh, Vietnam 27-29 June 2017. Published in: Van, T. , Nguyen Le, T. and Nguyen Duc, T. eds. 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). Vol. 63.IFMBE Proceedings Cham: Springer. , pp.655-660. (10.1007/978-981-10-4361-1_112)
Nguyen, V. P. et al., 2017. Modelling hydraulic fractures in porous media using flow cohesive interface elements. Engineering Geology 225 , pp.68-82. (10.1016/j.enggeo.2017.04.010)
Niland, A. 2017. Internal flow studies for the characterisation and optimisation of an effervescent atomiser. PhD Thesis , Cardiff University.
Noorikalkhoran, O. , Ahangari, R. and Shirani, A. S. 2017. Development of a parallel processing couple for calculations of control rod worth in terms of burn-up in a WWER-1000 reactor. Kerntechnik 82 (1), pp.43-56. (10.3139/124.110605)
Noorikalkhoran, O. and Sevostianov, I. 2017. Micromechanical modeling of neutron irradiation induced changes in yield stress and electrical conductivity of zircaloy. International Journal of Engineering Science 120 , pp.119-128. (10.1016/j.ijengsci.2017.07.002)
Nowak, E. et al., 2017. Bulk advection and interfacial flows in the binary coalescence of surfactant-laden and surfactant-free drops. Soft Matter 13 (26), pp.4616-4628. (10.1039/C7SM00328E)
Nujoom, R. , Mohammed, A. and Wang, Q. 2017. Towards a sustainable manufacturing system design:A multi-objective optimization model. Presented at: 2017 23rd International Conference on Automation and Computing (ICAC) Huddersfield, UK 7 - 8 Sep 2017.
O'Regan, P. et al. 2017. Engineering a more sustainable manufacturing process for metal Additive Layer Manufacturing using a productive process pyramid. Presented at: Sustainable Design and Manufacturing (SDM-17) Bologna, Italy 26-29 April 2017. Published in: Campana, G. et al., Sustainable Design and Manufacturing (SDM-17). Vol. 68.Cham: Springer. , pp.736-745. (10.1007/978-3-319-57078-5_69)
Okolo, C. K. and Meydan, T. 2017. Axial magnetic field sensing for pulsed magnetic flux leakage hairline crack detection and quantification. Presented at: 2017 IEEE SENSORS Glasgow, Scotland, UK 29 October-1 November 2017. SENSORS, 2017 IEEE. IEEE(10.1109/ICSENS.2017.8233983)
Okon, A. 2017. Combustion dynamics in a lean premixed combustor with swirl forcing and fuel conditions. PhD Thesis , Cardiff University.
Okon, A. et al. 2017. Effects of flame temperature on combustion instabilities of a premixed burner. Presented at: 8th European Combustion Meeting 2017 Dubrovnik, Croatia 18-21 April 2017.
Okon, A. et al. 2017. Acoustic dynamics of a swirl premixed combustor with different operating conditions. Energy Procedia 142 , pp.1674-1679. (10.1016/j.egypro.2017.12.548)
Olanrewaju, O. 2017. Impact of the European gas network on the operation of Great Britain’s gas and electricity networks. PhD Thesis , Cardiff University.
Olfert, J. S. et al., 2017. Effective density and volatility of particles sampled from a helicopter gas turbine engine. Aerosol Science and Technology 51 (6), pp.704-714. (10.1080/02786826.2017.1292346)
Oliff, H. and Liu, Y. 2017. Towards industry 4.0 utilizing data-mining techniques: a case study on quality improvement. Procedia CIRP 63 , pp.167. (10.1016/j.procir.2017.03.311)
Oliyide, R. et al. 2017. Low carbon technologies integration in smart low voltage network. Presented at: 2017 IEEE 15th International Conference on Industrial Informatics (INDIN) Emden, Germany 24 - 26 July 2017. (10.1109/INDIN.2017.8104816)
Olowojoba, G. B. et al., 2017. A facile way to produce epoxy nanocomposites having excellent thermal conductivity with low contents of reduced graphene oxide. Journal of Materials Science 52 (12), pp.7323-7344. (10.1007/s10853-017-0969-x)
Omar, S. et al. 2017. HV distribution network optimum supply restoration algorithm. Presented at: 51st International Universities Power Engineering Conference (UPEC 2016) Coimbra, Portugal 6-9 September 2016. Proceedings of the 2016 51st International Universities Power Engineering Conference (UPEC). IEEE(10.1109/UPEC.2016.8114010)
Ordonez-Sanchez, S. et al., 2017. Numerical modelling techniques to predict rotor imbalance problems in tidal stream turbines. Presented at: 12th European Wave and Tidal Energy Conference (EWTEC) Cork, Ireland 27 August - 1 September 2017.
Ouro, P. 2017. Large eddy simulation of tidal turbines. PhD Thesis , Cardiff University.
Ouro, P. et al. 2017. Hydrodynamic loadings on a horizontal axis tidal turbine prototype. Journal of Fluids and Structures 71 , pp.78-95. (10.1016/j.jfluidstructs.2017.03.009)
Ouro, P. and Stoesser, T. 2017. An immersed boundary-based large-eddy simulation approach to predict the performance of vertical axis tidal turbines. Computers & Fluids 152 , pp.74-87. (10.1016/j.compfluid.2017.04.003)
Ouro, P. and Stoesser, T. 2017. Wake generated downstream of a vertical axis tidal turbine. Presented at: 12th European Wave and Tidal Energy Conference (EWTEC) Cork, Ireland 27 August - 1 September 2017.
Ouro, P. et al. 2017. Large-Eddy simulation of shallow turbulent wakes behind a conical island. Physics of Fluids 29 (12) 126601. (10.1063/1.5004028)
Packianather, M. S. et al. 2017. Data mining techniques applied to a manufacturing SME. Procedia CIRP 62 , pp.123-128. (10.1016/j.procir.2016.06.120)
Pal, A. et al., 2017. Co-design of an antenna-power amplifier RF front-end block without matching network for 2.4 GHz WiFi application. Presented at: 2017 IEEE Radio and Wireless Symposium (RWS) Phoenix, AZ, USA 15-18 January 2017. 2017 IEEE Radio and Wireless Symposium (RWS). IEEE. , pp.201-203. (10.1109/RWS.2017.7885987)
Paladim, D. A. et al., 2017. Guaranteed error bounds in homogenisation: an optimum stochastic approach to preserve the numerical separation of scales. International Journal for Numerical Methods in Engineering 110 (2), pp.103-132. (10.1002/nme.5348)
Pandey, N. , Murugesan, K. and Thomas, H. R. 2017. Optimization of ground heat exchangers for space heating and cooling applications using Taguchi method and utility concept. Applied Energy 190 , pp.421-438. (10.1016/j.apenergy.2016.12.154)
Panwisawas, C. et al., 2017. Mesoscale modelling of selective laser melting: thermal fluid dynamics and microstructural evolution. Computational Materials Science 126 , pp.479-490. (10.1016/j.commatsci.2016.10.011)
Parker, N. et al. 2017. Simulation of RF fields for wood gluing applications. Presented at: 16th International Conference on Microwave and High Frequency Heating AMPERE 2017 Delft, Netherlands 18-21 September 2017.
Parkinson, C. et al. 2017. Impact of 18F-Choline PET scan acquisition time on delineation of GTV in prostate cancer [Poster Abstract]. Radiotherapy and Oncology 123 (S1), pp.S714-S715. (10.1016/S0167-8140(17)31768-1)
Patel, D. P. et al., 2017. Assessment of flood inundation mapping of Surat city by coupled 1D/2D hydrodynamic modeling: a case application of the new HEC-RAS 5. Natural Hazards 89 (1), pp.93-130. (10.1007/s11069-017-2956-6)
Pearson, M. R. et al. 2017. Improved acoustic emission source location during fatigue and impact events in metallic and composite structures. Structural Health Monitoring 16 (4), pp.382-399. (10.1177/1475921716672206)
Penchev, P. et al., 2017. Generic software tool for counteracting the dynamics effects of optical beam delivery systems. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231 (1), pp.48-64. (10.1177/0954405414565379)
Peng, X. et al., 2017. Linear elastic fracture simulation directly from CAD: 2D NURBS-based implementation and role of tip enrichment. International Journal of Fracture 204 (1), pp.55-78. (10.1007/s10704-016-0153-3)
Peng, X. et al., 2017. SDMF based interference rejection and PD interpretation for simulated defects in HV cable diagnostics. IEEE Transactions on Dielectrics and Electrical Insulation 24 (1), pp.83-91. (10.1109/TDEI.2016.006002)
Peng, X. et al., 2017. Rough set theory applied to pattern recognition of partial discharge in noise affected cable data. IEEE Transactions on Dielectrics and Electrical Insulation 24 (1), pp.147-156. (10.1109/TDEI.2016.006060)
Peng, X. et al. 2017. Isogeometric boundary element methods for three dimensional static fracture and fatigue crack growth. Computer Methods in Applied Mechanics and Engineering 316 , pp.151-185. (10.1016/j.cma.2016.05.038)
Peng, X. et al. 2017. An extended finite element method (XFEM) for linear elastic fracture with smooth nodal stress. Computers & Structures 179 , pp.48-63. (10.1016/j.compstruc.2016.10.014)
Petri, I. et al. 2017. Coordinating multi-site construction projects using federated clouds. Automation in Construction 83 , pp.273-284. (10.1016/j.autcon.2017.08.011)
Petri, I. et al. 2017. Optimizing energy efficiency in operating built environment assets through building Information modeling: a case study. Energies 10 (8) 1167. (10.3390/en10081167)
Petri, I. et al. 2017. Performance analysis of multi-institutional data sharing in the Clouds4Coordination system. Computers & Electrical Engineering 58 , pp.227-240. (10.1016/j.compeleceng.2017.02.015)
Petri, I. et al. 2017. Incentivising resource sharing in edge computing applications. Presented at: GECON 2017 Biarritz, France 19-21 Sep 2017. Published in: Pham, C. , Altmann, J. and Bañares, J. Á. eds. Economics of Grids, Clouds, Systems, and Services. Vol. 10537.Lecture Notes in Computer Science Cham, Switzerland: Springer. , pp.204-215. (10.1007/978-3-319-68066-8_16)
Picelli Sanches, R. et al. 2017. Topology optimization for submerged buoyant structures. Engineering Optimization 49 (1), pp.1-21. (10.1080/0305215X.2016.1164147)
Picelli Sanches, R. , Vicente, W. M. and Pavanello, R. 2017. Evolutionary topology optimization for structural compliance minimization considering design-dependent FSI loads. Finite Elements in Analysis and Design 135 , pp.44-55.
Picelli, R. et al., 2017. Stress minimization using the level set topology optimization. Presented at: 58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference Grapevine, TX, USA 9-13 January 2017. 58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Aerospace Research Central(10.2514/6.2017-1544)
Picot, O. T. et al., 2017. Using graphene networks to build bioinspired self-monitoring ceramics. Nature Communications 8 14425. (10.1038/ncomms14425)
Pooth, A. et al., 2017. Morphological and electrical comparison of Ti and Ta based ohmic contacts for AlGaN/GaN-on-SiC HFETs. Microelectronics Reliability 68 , pp.2-4. (10.1016/j.microrel.2016.11.002)
Pouttu, A. et al., 2017. P2P model for distributed energy trading, grid control and ICT for local smart grids. Presented at: 2017 European Conference on Networks and Communications (EuCNC) Oulu, Finland 12-15 June 2017. 2017 European Conference on Networks and Communications (EuCNC). IEEE(10.1109/EuCNC.2017.7980652)
Priegue Molinos, L. 2017. Optimisation of a vertical axis tidal turbine and testing of a prototype in an unblocked environment. PhD Thesis , Cardiff University.
Priegue Molinos, L. and Stoesser, T. 2017. The influence of blade roughness on the performance of a vertical axis tidal turbine. International Journal of Marine Energy 17 , pp.136-146. (10.1016/j.ijome.2017.01.009)
Pugh, D. G. et al. 2017. Dissociative influence of H2O vapour/spray on lean blowoff and NOx reduction for heavily carbonaceous syngas swirling flames. Combustion and Flame 177 , pp.37-48. (10.1016/j.combustflame.2016.11.010)
Pugh, D. et al. 2017. Catalytic influence of water vapor on lean blowoff and NOx reduction for pressurised swirling syngas flames. Presented at: ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition North Carolina, USA 26-30 June 2017. Volume 4B: Combustion, Fuels and Emissions. ASME. , pp.V04BT04A033. (10.1115/GT2017-64609)
Pullin, R. et al. 2017. Feasibility of detecting orthopaedic screw overtightening using acoustic emission. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 231 (3), pp.213-221. 95441191668911. (10.1177/0954411916689112)
Purnell, A. 2017. Application of the Fuller-Thompson equation in sinter blend design to increase sinter plant productivity. EngD Thesis , Cardiff University.
Qadrdan, M. et al. 2017. Efficacy of options to address balancing challenges: Integrated gas and electricity perspectives. Applied Energy 190 (10.1016/j.apenergy.2016.11.119)
Qadrdan, M. et al. 2017. Benefits of demand-side response in combined gas and electricity networks. Applied Energy 192 , pp.360-369. (10.1016/j.apenergy.2016.10.047)
Qadrdan, M. , Jenkins, N. and Wu, J. 2017. Smart grid and energy storage. In: Kalogirou, S. ed. McEvoy's Handbook of Photovoltaics, Third Edition: Fundamentals and Applications. Academic Press. , pp.915-927.
Qi, Q. et al. 2017. Using an MVDC link to increase DG hosting capacity of a distribution network. Energy Procedia 142 , pp.2224-2229. (10.1016/j.egypro.2017.12.622)
Qi, Q. and Wu, J. 2017. Increasing distributed generation penetration using network reconfiguration and soft open points. Energy Procedia 105 , pp.2169-2174. (10.1016/j.egypro.2017.03.612)
Qi, Q. , Wu, J. and Long, C. 2017. Multi-objective operation optimization of an electrical distribution network with soft open point. Applied Energy 208 , pp.734-744. (10.1016/j.apenergy.2017.09.075)
Qian, L. et al., 2017. Application and development of BIM in waterway infrastructure. Port & Waterway Engineering 10
Qian, L. , Li, H. and Jiang, S. 2017. Requirement analysis for data standardization for BIM based design and construction for waterway infrastructure. China Harbour Engineering 37 (10), pp.6-12.
Qin, J. , Liu, Y. and Grosvenor, R. 2017. Data analytics for energy consumption of digital manufacturing systems using Internet of Things method. Presented at: IEEE International Conference on Automation Science and Engineering Xi'an, China 20-23 August 2017.
Qin, J. , Liu, Y. and Grosvenor, R. 2017. A framework of energy consumption modelling for additive manufacturing using Internet of Things. Procedia CIRP Conference on Manufacturing System 63 , pp.307-312. (10.1016/j.procir.2017.02.036)
Qiu, C. et al. 2017. An experimental investigation into the stress and strain development of a Ni-base single crystal superalloy during cooling from solidification. Materials & Design 114 , pp.475-483. (10.1016/j.matdes.2016.10.072)
Quaglia, R. , Bell, J. J. and Cripps, S. 2017. New general formulation and experimental verification of harmonic clipping contours in high-frequency power devices. IEEE Transactions on Microwave Theory and Techniques 65 (10), pp.3903-3909. (10.1109/TMTT.2017.2687900)
Quaglia, R. et al. 2017. A 4W Doherty power amplifier in GaN MMIC technology for 15GHz applications. IEEE Microwave and Wireless Components Letters 27 (4), pp.365-367. (10.1109/LMWC.2017.2678440)
Quaglia, R. and Cripps, S. C. 2017. Harmonic clipping contours: numerical computation and extension to higher harmonics. Presented at: European Microwave Conference London, UK 3-7 Oct. 2016. Microwave Conference (EuMC), 2016 46th European. IEEE. , pp.405-408. (10.1109/EuMC.2016.7824365)
Quaglia, R. et al. 2017. Design and characterization of a 1.7?2.7 GHz quasi-MMIC Doherty power amplifier. Presented at: 2017 IEEE MTT-S International Microwave Symposium (IMS) Honololu, HI, USA 4-9 June 2017. 2017 IEEE MTT-S International Microwave Symposium (IMS). IEEE. , pp.771-773. (10.1109/MWSYM.2017.8058689)
Quaglia, R. , Shepphard, D. J. and Cripps, S. 2017. A reappraisal of optimum output matching conditions in microwave power transistors. IEEE Transactions on Microwave Theory and Techniques 65 (3), pp.838-845. (10.1109/TMTT.2016.2627557)
Rae, K. et al., 2017. InGaN µLEDs integrated onto colloidal quantum dot functionalized ultra-thin glass. Optics Express 25 (16), pp.19179-19184. (10.1364/OE.25.019179)
Rafiee, A. , Panahi, M. and Khalilpour, K. R. 2017. CO2 utilization through integration of post-combustion carbon capture process with Fischer-Tropsch gas-to-liquid (GTL) processes. Journal of CO2 Utilization 18 , pp.98-106. (10.1016/j.jcou.2017.01.016)
Ramella, C. et al., 2017. High efficiency power amplifiers for modern mobile communications: The load-modulation approach. Electronics 6 (4) 96. (10.3390/electronics6040096)
Rappel, H. , Beex, L. A. A. and Bordas, S. P. A. 2017. Bayesian inference to identify parameters in viscoelasticity. Mechanics of Time-Dependent Materials 22 (2), pp.221-258. (10.1007/s11043-017-9361-0)
Rashid, G. et al., 2017. Delignification and enhanced gas release from soil containing lignocellulose by treatment with bacterial lignin degraders. Journal of Applied Microbiology 123 (1), pp.159-171. (10.1111/jam.13470)
Rauch, D. et al., 2017. Microwave cavity perturbation studies on H-form and Cu ion-exchanged SCR catalyst materials: correlation of ammonia storage and dielectric properties. Topics in Catalysis 60 (3-5), pp.243-249. (10.1007/s11244-016-0605-z)
Redif, S. , Weiss, S. and McWhirter, J. G. 2017. Relevance of polynomial matrix decompositions to broadband blind signal separation. Journal of Signal Processing 134 , pp.76-86. (10.1016/j.sigpro.2016.11.019)
Ren, G. and Li, H. 2017. BIM based value for money assessment in public-private partnership. Presented at: PRO-VE 2017: Collaboration in a Data-Rich World Vicenza, Italy 18-20 September 2017. Published in: Camarinha-Matos, L. , Afsarmanesh, H. and Fornasiero, R. eds. Collaboration in a Data-Rich World. PRO-VE 2017. IFIP Advances in Information and Communication Technology. Vol. 506.IFIP Advances in Information and Communication Technology Cham: Springer Verlag. , pp.51-62. (10.1007/978-3-319-65151-4_5)
Reynolds, J. , Hippolyte, J. and Rezgui, Y. 2017. A smart heating set point scheduler using an artificial neural network and genetic algorithm. Presented at: International Conference on Engineering, Technology and Innovation Funchal, Portugal 27-29 June 2017. IEEE Explore. IEEE. , pp.704-710. (10.1109/ICE.2017.8279954)
Reynolds, J. , Rezgui, Y. and Hippolyte, J. 2017. Upscaling energy control from building to districts: current limitations and future perspectives. Sustainable Cities and Society 35 , pp.816-829. (10.1016/j.scs.2017.05.012)
Roberts, M. et al. 2017. Changes in metal leachability through stimulation of iron reducing communities within waste sludge. Solid State Phenomena 262 , pp.269-272. (10.4028/www.scientific.net/SSP.262.269)
Robins, B. et al., 2017. Developing interaction scenarios with a humanoid robot to encourage visual perspective taking skills in children with autism – preliminary proof of concept tests. Presented at: ICSR: International Conference on Social Robotics 22 - 24 Nov 2017. Published in: Kheddar, A. et al., Social Robotics. Vol. 10652.Lecture Notes in Computer Science Cham: Springer Verlag. , pp.147-155. (10.1007/978-3-319-70022-9_15)
Robinson, M. et al., 2017. Developing elastomeric cellular structures for multiple head impacts. Presented at: 2017 IRCOBI Conference Antwerp, Belgium 13–15 September 2017.
Rocio Moure, M. et al., 2017. Direct extraction of an admittance domain behavioral model from large-signal load-pull measurements. Presented at: 2017 IEEE MTT-S International Microwave Symposium (IMS) Honololu, HI, USA 4-9 June 2017. 2017 IEEE MTT-S International Microwave Symposium (IMS). IEEE. , pp.1053-1056. (10.1109/MWSYM.2017.8058775)
Rolley, M. H. , Sweet, T. K. N. and Min, G. 2017. In-situ thermoelectric temperature monitoring and 'Closed-loop integrated control' system for concentrator photovoltaic-thermoelectric hybrid receivers. Presented at: 13th International Conference on Concentrator Photovoltaic Systems (CPV-13) Ottawa, Canada 1–3 May 2017. Published in: Siefer, G. , Hinzer, K. and Rey-Stolle, I. eds. AIP Conference Proceedings. Vol. 1881.Melville, NY: AIP Publishing. , pp.100001. (10.1063/1.5001452)
Rolley, M. et al. 2017. Triple-junction concentrator photovoltaic-thermoelectric hybrid receivers: robustness, valiation and preliminary reliability studies. Presented at: 13th Photovoltaic Science, Application and Technology Conference (PVSAT-13) Bangor, Wales, UK 5- 7 April 2017.
Runyon, J. 2017. Gas turbine fuel flexibility: pressurized swirl flame stability, thermoacoustics, and emissions. PhD Thesis , Cardiff University.
Runyon, J. et al. 2017. Experimental analysis of confinement and swirl effects on premixed ch4-h-2 flame behavior in a pressurized generic swirl burner. Presented at: ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition North Carolina, USA 26-30 June 2017. ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. Vol. 4B.ASME(10.1115/GT2017-64794)
Ryan, M. and Eyers, D. 2017. Digital manufacturing for spare parts: scenarios for the automotive supply chain. Presented at: Third Summit of ACMA Centre for Technology Pune, India 8 - 9 December 2017.
Sadeghi, N. et al., 2017. Dose assessment for emergency workers in early phase of Fukushima Daiichi nuclear power plant accident. Kerntechnik 82 (5), pp.562-571. (10.3139/124.110799)
Sahoo, S. et al., 2017. Investigation of distributed cooperative control for DC microgrids in different communication medium. Energy Procedia 142 , pp.2218-2223. (10.1016/j.egypro.2017.12.592)
Sainz, L. et al., 2017. Positive-net-damping stability criterion in grid-connected VSC systems. IEEE Journal of Emerging and Selected Topics in Power Electronics 5 (4), pp.1499-1512.
Sainz, L. et al., 2017. Effect of wind turbine converter control on wind power plant harmonic response and resonances. IET Electric Power Applications 11 (2), pp.157-168. (10.1049/iet-epa.2016.0241)
Salinas, P. et al., 2017. Improving the convergence behaviour of a fixed-point-iteration solver for multiphase flow in porous media. International Journal for Numerical Methods in Fluids 84 (8), pp.466-476. (10.1002/fld.4357)
Salinas, P. et al., 2017. Improving the robustness of the control volume finite element method with application to multiphase porous media flow. International Journal for Numerical Methods in Fluids 85 (4), pp.235-246. (10.1002/fld.4381)
Sami, S. S. 2017. Virtual energy storage for frequency and voltage control. PhD Thesis , Cardiff University.
Samiran, N. A. et al., 2017. Swirl stability and emission characteristics of CO-enriched syngas/air flame in a premixed swirl burner. Process Safety and Environmental Protection 112 (Part B), pp.315-326. (10.1016/j.psep.2017.07.011)
Sangid, M. et al., 2017. Integrating ICME practices into design systems and structural analysis. Presented at: 55th AIAA Aerospace Sciences Meeting, AIAA SciTech Forum Grapevine, TX, USA 9 - 13 January 2017. 55th AIAA Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics(10.2514/6.2017-0874)
Sani Hassan, A. , Cipcigan, L. M. and Jenkins, N. 2017. Optimal battery storage operation for PV systems with tariff incentives. Applied Energy 203 , pp.422-441. (10.1016/j.apenergy.2017.06.043)
Sapsford, D. J. , Cleall, P. and Harbottle, M. 2017. In situ resource recovery from waste repositories: exploring the potential for mobilization and capture of metals from anthropogenic ores. Journal of Sustainable Metallurgy 3 (2), pp.375-392. (10.1007/s40831-016-0102-4)
Sapsford, D. J. and Tufvesson, S. 2017. Properties of recycled sludge formed from different aluminiferous reagents during the ettringite process. Journal of Water Process Engineering 19 , pp.305-311. (10.1016/j.jwpe.2017.08.016)
Sarhosis, V. et al., 2017. Towards commercialising underground coal gasification in the EU. Environmental Geotechnics 4 (2), pp.113-122. (10.1680/jenge.15.00044)
Sawle, L. et al. 2017. The Osteoarthritis Technology Network Plus (OATech Network+): a multidisciplinary approach to improving patient outcomes. Physiotherapy 103 (Sup 1), pp.e92. (10.1016/j.physio.2017.11.062)
Sawle, L. , Freeman, J. and Marsden, J. 2017. Intra-Rater reliability of the multiple single-leg hop-stabilization test and relationships with age, leg dominance and training. International Journal of Sports Physical Therapy 12 (2), pp.190.
Scott, C. E. H. et al., 2017. Metal-backed versus all-polyethylene unicompartmental knee arthroplasty. Bone and Joint Research 6 (1), pp.22-30. (10.1302/2046-3758.61.BJR-2016-0142.R1)
Selvaraj, P. et al., 2017. Enhancing the efficiency of transparent dye-sensitized solar cells using concentrated light. Solar Energy Materials and Solar Cells 175 , pp.29-34. (10.1016/j.solmat.2017.10.006)
Setchi, R. and Asikhia, O. K. 2017. Exploring user experience with image schemas, sentiments, and semantics. IEEE Transactions on Affective Computing 10 (2), pp.185-195. (10.1109/TAFFC.2017.2705691)
Shahidan, S. et al., 2017. Active crack evaluation in concrete beams using statistical analysis of acoustic emission data. Insight - Non-Destructive Testing and Condition Monitoring 59 (1), pp.24-31. (10.1784/insi.2017.59.1.24)
Shao, Y. et al., 2017. A spatial-temporal charging load forecast and impact analysis method for distribution network using EVs-traffic-distribution model. Proceedings of the CSEE: Smart Grid 37 (18), pp.5207-5219. (10.13334/j.0258-8013.pcsee.161470)
Shashank, B. S. et al., 2017. Flow of microbial suspension through porous media. Presented at: 1st GeoMEast International Congress and Exhibition, Egypt 2017 on Sustainable Civil Infrastructures 15-17 July 2017. Published in: Singh, D. N. and Galaa, A. eds. Contemporary Issues in Geoenvironmental Engineering: Proceedings of the 1st GeoMEast International Congress and Exhibition, Egypt 2017 on Sustainable Civil Infrastructures. Springer. , pp.115-122. (10.1007/978-3-319-61612-4_9)
Shen, Z. et al., 2017. Qualitative and quantitative characterisation of adsorption mechanisms of lead on four biochars. Science of the Total Environment 609 , pp.1401-1410. (10.1016/j.scitotenv.2017.08.008)
Shen, Z. et al., 2017. Characteristics and mechanisms of nickel adsorption on biochars produced from wheat straw pellets and rice husk. Environmental Science and Pollution Research 24 (14), pp.12809-12819. (10.1007/s11356-017-8847-2)
Shepphard, D. J. , Powell, J. and Cripps, S. C. 2017. A broadband reconfigurable load modulated balanced amplifier (LMBA). Presented at: IEEE MTT-S International Microwave Symposium (IMS) Honololu, HI, USA 4-9 June 2017. 2017 IEEE MTT-S International Microwave Symposium (IMS). IEEE. , pp.943-945. (10.1109/MWSYM.2017.8058743)
Shuang, Z. et al., 2017. Erodibility in synthetic water repellent soils. Presented at: ICSMGE 2017 - 19th International Conference on Soil Mechanics and Geotechnical Engineering Seoul; South Korea 17-22 September 2017.
Shvab, I. et al., 2017. Precipitation mechanisms of mesoporous nanoparticle aggregates: Off-lattice, coarse-grained, kinetic simulations. Crystal Growth and Design 17 (3), pp.1316-1327. (10.1021/acs.cgd.6b01712)
Skiba-Szymanska, J. et al., 2017. Universal growth scheme for quantum dots with low fine-structure splitting at various emission wavelengths. Physical Review Applied 8 (1) 14013. (10.1103/PhysRevApplied.8.014013)
Smith, R. M. H. and Cripps, S. C. 2017. Broadband push-pull power amplifier design at microwave frequencies. Presented at: 2016 46th European Microwave Conference (EuMC) 4-6 October 2016. 2016 46th European Microwave Conference (EuMC). IEEE. , pp.1353-1356. (10.1109/EuMC.2016.7824603)
Soman, S. 2017. Improving the manufacturing process of brick based products using FIT principles and Discrete Event Simulation. MPhil Thesis , Cardiff University.
Song, W. et al., 2017. Tuning the double layer of graphene oxide through phosphorus doping for enhanced supercapacitance. ACS Energy Letters 2 (5), pp.1144-1149. (10.1021/acsenergylett.7b00275)
Song, Y. et al., 2017. A compact ka-band active integrated antenna with a GaAs amplifier in a ceramic package. IEEE Antennas and Wireless Propagation Letters 16 , pp.2416-2419. (10.1109/LAWP.2017.2721956)
Soroka, A. et al. 2017. Big data driven customer insights for SMEs in redistributed manufacturing. Procedia CIRP 63 , pp.692-697. (10.1016/j.procir.2017.03.319)
Srivastava, P. and Kowshik, M. 2017. Mechanisms of bacterial heavy metal resistance and homeostasis. In: Donati, E. R. ed. Heavy Metals in the Environment. CRC Press. , pp.15-42.
Srivastava, P. , Kowshik, M. and Kivisaar, M. 2017. Fluorescent Lead(IV) sulfide nanoparticles synthesized by Idiomarina sp. strain PR58-8 for bioimaging applications. Applied and Environmental Microbiology 83 (7) e03091-16. (10.1128/AEM.03091-16)
Stokke, C. et al., 2017. Dosimetry-based treatment planning for molecular radiotherapy; a summary of the 2017 report from the Internal Dosimetry Task Force. EJNMMI Physics 4 27. (10.1186/s40658-017-0194-3)
Stratos, P. 2017. Behaviour of compacted bentonite at elevated temperatures. PhD Thesis , Cardiff University.
Strisland, F. et al., 2017. Portable qEEG and HD-tCS device for point-of-injury Traumatic Brain Injury diagnostics. Presented at: 14th International Conference on Wearable Micro and Nano Technologies for Personalized Health (pHealth) Eindhoven, The Netherlands 14-16 May 2017. Published in: Blobel, B. and Goossen, W. eds. pHealth 2017. Vol. 237.Studies in Health Technology and Informatics Amsterdam: IOS Press. , pp.198-203. (10.3233/978-1-61499-761-0-198)
Strutzenberger, G. , Nokes, L. and Irwin, G. 2017. Artificial turf in football: an injury perspective. In: Nunome, H. , Henning, E. and Smith, N. eds. Football Biomechanics. UK: Routledge. , pp.204-221.
Stubbs, A. , Bockelmann-Evans, B. N. and Stoesser, T. 2017. Numerical modelling of colmation and decolmation processes for gravel-bed river restoration schemes. Presented at: EGU General Assembly 2017 Vienna, Austria 8-13 April 2017. Geographical Research Abstract.
Suliman, B. , Featherston, C. and Kennedy, D. 2017. Reduced order techniques for modelling the effects of damage in composite plates. Presented at: ICCM International Conferences on Composite Materials Xi'an, China 20-25 Aug 2017.
Sun, T. et al., 2017. Precision turning of optical mandrel with high steepness axisymmetric aspheric surface using arc-edged diamond cutter. International Journal of Advanced Manufacturing Technology 93 (9-12), pp.4243-4252. (10.1007/s00170-017-0872-2)
Supanich, M. et al., 2017. How to select and evaluate a PET auto-segmentation tool-insights from AAPM TG211. Medical Physics 44 (6), pp.3285-3286. (10.1002/mp.12304)
Surendran, M. et al., 2017. Linear smoothed extended finite element method. International Journal for Numerical Methods in Engineering 112 (12), pp.1733-1749. (10.1002/nme.5579)
Sutton, A. 2017. Investigation into the physicochemical behaviours of ferruginous mine waters from across the globe. PhD Thesis , Cardiff University.
Sweet, T. K. N. et al. 2017. Novel hybrid III:V concentrator photovoltaic-thermoelectric receiver designs. Presented at: 13th International Conference on Concentrator Photovoltaic Systems (CPV-13) Ottawa, Canada 1-3 May 2017. AIP Conference Proceedings. Vol. 1881.AIP Publishing. , pp.80009. (10.1063/1.5001447)
Sweet, T. et al. 2017. Experimental characterization and multi-physics simulation of a triple-junction cell in a novel hybrid III:V concentrator photovoltaic-thermoelectric receiver design with secondary optical element. Presented at: 9th International Conference on Applied Energy (ICAE2017) Cardiff, UK 21st - 24th August. Proceedings of the 9th International Conference on Applied Energy. Energy Procedia Elsevier. , pp.809-814. (10.1016/j.egypro.2017.12.130)
Sykes, J. , Alaei, P. and Spezi, E. 2017. Imaging dose in radiation therapy. In: Mijnheer, B. ed. Clinical 3D Dosimetry in Modern Radiation Therapy. CRC Press. , pp.561-588.
Syred, N. et al. 2017. CARSOXY (CO2-Argon-Steam-OxyFuel) combustion in gas turbines for CCS systems. Presented at: 55th AIAA Aerospace Sciences Meeting Grapevine, TX, USA 9-13 January 2017. 55th AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, (AIAA 2017-1608). Sci Tech(10.2514/6.2017-1608)
Tafrishi, S. A. , Svinin, M. and Esmaeilzadeh, E. 2017. Effects of the slope on the motion of spherical RollRoller robot. Presented at: 2016 IEEE/SICE International Symposium on System Integration (SII) Sapporo, Japan 13-15 December 2016. 2016 IEEE/SICE International Symposium on System Integration (SII). IEEE(10.1109/SII.2016.7844110)
Teall, O. et al. 2017. Development of high shrinkage polyethylene terephthalate (PET) shape memory polymer tendons for concrete crack closure. Smart Materials and Structures 26 (4) 45006. (10.1088/1361-665X/aa5d66)
Teng, F. et al., 2017. Challenges on primary frequency control and potential solution from EVs in the future GB electricity system. Applied Energy 194 (10.1016/j.apenergy.2016.05.123)
Terlet, J. et al. 2017. Comparing diurnal patterns of domestic water consumption: an international study. Presented at: 11th European Conference on Product and Process Modelling, ECPPM 2016 Limassol; Cyprus 7 - 9 September 2016. Published in: Christodoulou, S. E. and Scherer, R. eds. eWork and eBusiness in Architecture, Engineering and Construction: ECPPM 2016: Proceedings of the 11th European Conference on Product and Process Modelling (ECPPM 2016), Limassol, Cyprus, 7-9 September 2016. Leiden: CRC Press. , pp.605-611. (10.1201/9781315386904)
Thangaraj, K. 2017. Development of efficient energy storage and power management for autonomous aircraft structural health monitoring systems. PhD Thesis , Cardiff University.
Thomas, J. , Ghazizadeh, S. and Masoero, E. 2017. Kinetic mechanisms and activation energies for hydration of standard and highly reactive forms of β-dicalcium silicate (C2S). Cement and Concrete Research 100 , pp.322-328. (10.1016/j.cemconres.2017.06.001)
Thomas, L. et al. 2017. Assessing distribution network hosting capacity with the addition of soft open points. Presented at: 5th IET International Conference on Renewable Power Generation London, UK 21 - 23 September 2016. 5th IET International Conference on Renewable Power Generation (RPG) 2016. IEEE. , pp.1-6. (10.1049/cp.2016.0553)
Thomas, L. et al. 2017. Automation of the supplier role in the GB power system using blockchain based smart contracts. CIRED - Open Access Proceedings Journal 2017 (1), pp.2619-2623. (10.1049/oap-cired.2017.0987)
Thomas, R. et al. 2017. Photonic integration platform with pump free microfluidics. Optics Express 25 (20), pp.23634-23644. (10.1364/OE.25.023634)
Togni, R. , Cimarelli, A. and De Angelis, E. 2017. Towards an improved subgrid-scale model for thermally driven flows. In: Örlü, R. et al., Progress in Turbulence VII. Vol. 196, Springer Proceedings in Physics Cham: Springer. , pp.141-145. (10.1007/978-3-319-57934-4_20)
Tolosana-Calasanz, R. et al., 2017. Computational resource management for data-driven applications with deadline constraints. Concurrency and Computation: Practice and Experience 29 (8), pp.-. e4018. (10.1002/cpe.4018)
Tripathy, S. , Thomas, H. R. and Bag, R. 2017. Geoenvironmental application of bentonites in underground disposal of nuclear waste: characterization and laboratory tests. Journal of Hazardous, Toxic, and Radioactive Waste 21 (1) D4015002. (10.1061/(ASCE)HZ.2153-5515.0000272)
Tripathy, S. , Thomas, H. R. and Stratos, P. 2017. Response of compacted bentonites to thermal and thermo-hydraulic loadings at high temperatures. Geosciences 7 (3) 53. (10.3390/geosciences7030053)
Ugalde Loo, C. E. et al. 2017. Open access simulation toolbox for the grid connection of offshore wind farms using multi-terminal HVDC networks. Presented at: 13th IET International Conference on AC and DC Power Transmission (ACDC 2017) Manchester, UK 14-16 Feb 2017. 13th IET International Conference on AC and DC Power Transmission (ACDC 2017). IET. , pp.54-59. (10.1049/cp.2017.0054)
Ugalde Loo, C. et al. 2017. BEST PATHS project: real-time demonstrator for the integration of offshore wind farms using multi-terminal HVDC grids. Presented at: Offshore Wind Energy 2017 London, UK 6-8 June 2017.
Ulmeanu, M. et al., 2017. Modifying the morphology of silicon surfaces by laser induced liquid assisted colloidal lithography. Materials 10 (11) 1306. (10.3390/ma10111306)
Valera Medina, A. et al. 2017. Outlet geometrical impacts on blowoff effects when using various syngas mixtures in swirling flows. Applied Energy 207 , pp.195-207. (10.1016/j.apenergy.2017.05.119)
Valera Medina, A. et al. 2017. Coherent structure impacts on blowoff using various syngases. Energy Procedia 105 , pp.1356-1362. (10.1016/j.egypro.2017.03.500)
Valera Medina, A. et al. 2017. Ammonia-methane combustion in tangential swirl burners for gas turbine power generation. Applied Energy 185 (2), pp.1362-1371. (10.1016/j.apenergy.2016.02.073)
Valera Medina, A. et al. 2017. Preliminary study on lean premixed combustion of ammonia-hydrogen for swirling gas turbine combustors. International Journal of Hydrogen Energy 42 (38), pp.24495-24503. (10.1016/j.ijhydene.2017.08.028)
Vidal, E. et al., 2017. Online view planning for inspecting unexplored underwater structures. IEEE Robotics and Automation Letters 2 (3), pp.1436-1443. (10.1109/LRA.2017.2671415)
Villa, B. et al., 2017. Surface acoustic wave modulation of a coherently driven quantum dot in a pillar microcavity. Applied Physics Letters 111 (1), pp.-. 11103. (dx.doi.org/10.1063/1.4990966)
Walden, S. J. 2017. Progressive changes in the properties of bone during soft tissue decomposition. PhD Thesis , Cardiff University.
Walden, S. J. , Evans, S. L. and Mulville, J. 2017. Changes in Vickers hardness during the decomposition of bone: possibilities for forensic anthropology. Journal of the Mechanical Behaviour of Biomedical Materials 65 , pp.672-678. (10.1016/j.jmbbm.2016.09.037)
Wan, D. et al., 2017. A fully smoothed XFEM for analysis of axisymmetric problems with weak discontinuities. International Journal for Numerical Methods in Engineering 110 (3), pp.203-226. (10.1002/nme.5352)
Wang, B. et al., 2017. Macro-crack initiation life for orthotropic steel decks considering weld heterogeneity and random traffic loading. Structure and Infrastructure Engineering 13 (12), pp.1639-1652. (10.1080/15732479.2017.1315733)
Wang, H. et al. 2017. Effects of inclusion contents on resilient modulus and damping ratio of unsaturated track-bed materials. Canadian Geotechnical Journal 54 (12), pp.1672-1681. (10.1139/cgj-2016-0673)
Wang, Z. 2017. Polynomial matrix eigenvalue decomposition techniques for multichannel signal processing. PhD Thesis , Cardiff University.
Wang, C. et al., 2017. Multiscale simulation of power system transients based on the matrix exponential function. IEEE Transactions on Power Systems 32 (3), pp.1913-1926. (10.1109/TPWRS.2016.2598883)
Wang, C. et al., 2017. Optimal configuration of soft open point for active distribution network considering the characteristics of distributed generation. Proceedings of the CSEE: Smart Grid (10.13334/j.0258-8013.pcsee.152649)
Wang, C. et al., 2017. Optimal siting and sizing of soft open points in active electrical distribution networks. Applied Energy 189 , pp.301-309. (10.1016/j.apenergy.2016.12.075)
Wang, C. et al., 2017. A rolling projective integration method for stochastic dynamic simulation of active distribution networks. Proceedings of the CSEE: Smart Grid 37 (4), pp.1096-1105. (10.13334/j.0258-8013.pcsee.160338)
Wang, J. et al., 2017. Optimal scheduling of industrial task-continuous load management for smart power utilization. Applied Sciences 7 (3) 281. (10.3390/app7030281)
Wang, J. , Ran, R. and Zhou, Y. 2017. A short-term photovoltaic power prediction model based on an FOS-ELM algorithm. Applied Sciences 7 (4) 423. (10.3390/app7040423)
Wang, J. et al., 2017. A robust optimization strategy for domestic electric water heater load scheduling under uncertainties. Applied Sciences 7 (11), pp.1136. (10.3390/app7111136)
Wang, J. , Zhang, H. and Zhou, Y. 2017. Intelligent Under Frequency and Under Voltage Load Shedding Method Based on the Active Participation of Smart Appliances. IEEE Transactions on Smart Grid 8 (1), pp.353-361. (10.1109/TSG.2016.2582902)
Wang, L. , Meydan, T. and Williams, P. I. 2017. A two-axis goniometric sensor for tracking finger motion. Sensors 17 (4), pp.770. (10.3390/s17040770)
Wang, L. , Meydan, T. and Williams, P. 2017. Design and evaluation of a 3-D printed optical sensor for monitoring finger flexion. IEEE Sensors Journal 17 (6), pp.1937-1944. (10.1109/JSEN.2017.2654863)
Wang, M. et al., 2017. Active power regulation for large-scale wind farms through an efficient power plant model of electric vehicles. Applied Energy 185 (2), pp.1673-1683. (10.1016/j.apenergy.2016.02.008)
Wang, X. et al., 2017. Organizational capability: skills related to organizational knowledge. Journal of Integrated Design and Process Science 21 (1), pp.1-3. (10.3233/jid-2017-0010)
Wang, Z. et al. 2017. Decoupling of broadband optical MIMO systems using the multiple shift SBR2 algorithm. International Journal of Advances in Telecommunications, Electrotechnics, Signals and Systems 6 (1), pp.30-37. (10.11601/ijates.v6i1.207)
Watkins, C. et al., 2017. Improving aid through good design: a case study in rural Zambia. In: Chakrabarti, A. and Chakrabarti, D. eds. Research into Design for Communities, Volume 1. Vol. 65, Smart Innovation, Systems and Technologies Singapore: Springer. , pp.881-892. (10.1007/978-981-10-3518-0_76)
Welikala, S. et al., 2017. Incorporating appliance usage patterns for non-intrusive load monitoring and load forecasting. IEEE Transactions on Smart Grid (99)(10.1109/TSG.2017.2743760)
Welikala, S. et al., 2017. Robust non-intrusive load monitoring (NILM) with unknown loads. Presented at: IEEE International Conference on Information and Automation for Sustainability (ICIAfS) Galle, Sri Lanka 16-19 December 2016. 2016 IEEE International Conference on Information and Automation for Sustainability (ICIAfS). IEEE(10.1109/ICIAFS.2016.7946569)
Weng, K. 2017. Performance of UK dwellings in projected future climates. Presented at: The 8th International Conference on Applied Energy Beijing, China 8-11 October 2016. Energy Procedia. Vol. 105.Elsevier. , pp.3727-3732. (10.1016/j.egypro.2017.03.864)
Werrell, J. et al. 2017. Effect of slurry composition on the chemical mechanical polishing of thin diamond films. Science and Technology of Advanced Materials 18 (1), pp.654-663. (10.1080/14686996.2017.1366815.)
Whatling, G. et al. 2017. The effect of leg re-alignment on knee loading during gait. Presented at: XXVI Congress of the International Society of Biomechanics Brisbane, Australia 23-27 July 2017.
Whelton, C. et al., 2017. Combined effect of toe out gait and high tibial osteotomy on knee adduction moment in patients with varus knee deformity. Clinical Biomechanics 43 , pp.109-114. (10.1016/j.clinbiomech.2017.02.009)
White, J. et al., 2017. Commissioning through Evaluation: Selective internal radiation therapy (SIRT).. Project Report.[Online].NHS EnglandAvailable athttps://www.engage.england.nhs.uk/consultation/selective-internal-radiation-therapy/user_uploads/sirt-commissioning-through-evaluation-report.pdf.
Widger, P. and Haddad, A. 2017. Gaseous by-products of a CF3I-CO2 gas mixture under lightning impulse and AC breakdowns. Presented at: 20th International Symposium on high voltage engineering (ISH 2017) Buenos Aires, Argentina 28th Aug - 01 Sept 2017.
Widger, P. and Haddad, A. 2017. Solid by-products of a CF3I-CO2 insulating gas mixtures on electrodes after lightning impulse breakdown. Journal of Physics Communications 1 (2) 25010. (10.1088/2399-6528/aa8ab4)
Williams, E. and Lavery, N. 2017. Laser processing of bulk metallic glass: A review. Journal of Materials Processing Technology 247 , pp.73-91. (10.1016/j.jmatprotec.2017.03.034)
Williams, D. et al., 2017. Relationship between frontal plane alignment and biomechanical performance of total knee replacement using dynamic fluoroscopy and gait analysis of a unique patient population. Presented at: XXVI Congress of the International Society of Biomechanics Brisbane, Australia 23-27 July 2017.
Wood, L. et al., 2017. Developing child-robot interaction scenarios with a humanoid robot to assist children with autism in developing visual perspective taking skills. Presented at: 26th International Symposium on Robot and Human Interactive Communication (RO-MAN) Lisbon, Portugal 28 Aug- 1 Sep 2017. International Symposium on Robot and Human Interactive Communication (RO-MAN). IEEE. , pp.1055. (10.1109/ROMAN.2017.8172434)
Wood, L. J. et al., 2017. The Iterative development of the humanoid robot Kaspar: An assistive robot for children with autism. Presented at: ICSR: International Conference on Social Robotics 22 - 24 Nov 2017. Social Robotics. Vol. 10652.Lecture Notes in Computer Science Cham: Springer Verlag. , pp.53-63. (10.1007/978-3-319-70022-9_6)
Wu, G. et al., 2017. Improved vector control for VSC-HVDC connected to weak AC grids. Proceedings of the CSEE: Large Power Grid Planning and Operation 37 (16), pp.4577-4590. (10.13334/j.0258-8013.pcsee.161937)
Wu, J. et al. 2017. Synergies between energy supply networks. Applied Energy 192 , pp.263-267. (10.1016/j.apenergy.2017.02.038)
Wu, Z. , Chen, X. and Weaver, P. M. 2017. Buckling analysis of variable angle tow composite plates with one circular delamination. Presented at: 21st International Conference on Composites Materials (ICCM-21) Xi'an, China 20-25 August 2017.
Wu, Z. , Raju, G. and Weaver, P. 2017. Analysis and design for the moderately deep postbuckling behavior of composite plates. Journal of Aircraft 54 (1), pp.327-335. (10.2514/1.C033875)
Wyatt, H. L. et al. 2017. Optical strain measurement techniques for soft cellular structures. Presented at: BSSM 12th International Conference on Advances in Experimental Mechanics Sheffield, UK 29 - 31 August 2017.
Xia, W. et al., 2017. Stabilization and solidification of a heavy metal contaminated site soil using a hydroxyapatite based binder. Construction and Building Materials 156 , pp.199-207. (10.1016/j.conbuildmat.2017.08.149)
Xiao, H. et al. 2017. Reduced chemical mechanisms for ammonia/methane co-firing for gas turbine applications. Energy Procedia 105 , pp.1483-1488. (10.1016/j.egypro.2017.03.441)
Xiao, H. and Valera Medina, A. 2017. Chemical kinetic mechanism study on premixed combustion of ammonia/hydrogen fuels for gas turbine use. Journal of Engineering for Gas Turbines and Power 139 (8), pp.-. (10.1115/1.4035911)
Xiao, H. , Valera Medina, A. and Bowen, P. J. 2017. Modeling combustion of ammonia/hydrogen fuel blends under gas turbine conditions. Energy and Fuels 31 (8), pp.8631-8642. (10.1021/acs.energyfuels.7b00709)
Xiao, H. , Valera Medina, A. and Bowen, P. J. 2017. Study on premixed combustion characteristics of co-firing ammonia/methane fuels. Energy 140 (1), pp.125-135. (10.1016/j.energy.2017.08.077)
Xiao, H. et al. 2017. 3D simulation of ammonia combustion in a lean premixed swirl burner. Energy Procedia 142 , pp.1294-1299. (10.1016/j.egypro.2017.12.504)
Xiao, H. et al. 2017. Numerical study assessing various ammonia/methane reaction models for use under gas turbine conditions. Fuel 196 , pp.344-351. (10.1016/j.fuel.2017.01.095)
Xie, Z. 2017. Numerical modelling of wind effects on breaking waves in the surf zone. Ocean Dynamics 67 (10), pp.1251-1261. (10.1007/s10236-017-1086-8)
Xie, Z. et al. 2017. Numerical study of three-dimensional droplet impact on a flowing liquid film in annular two-phase flow. Chemical Engineering Science 166 , pp.303-312. (10.1016/j.ces.2017.04.015)
Xie, Z. et al. 2017. Numerical simulation of three-dimensional breaking waves and its interaction with a vertical circular cylinder. Journal of Hydrodynamics 29 (5), pp.800-804. (10.1016/S1001-6058(16)60791-6)
Xydas, E. et al. 2017. Probabilistic wind power forecasting and its application in the scheduling of gas-fired generators. Applied Energy 192 , pp.382-394. (10.1016/j.apenergy.2016.10.019)
Yan, G. et al., 2017. Research on the mechanism of neutral-point voltage fluctuation and capacitor voltage balancing control strategy of three-phase three-level T-type inverter. Journal of Electrical Engineering and Technology 12 (6), pp.2227-2236. (10.5370/JEET.2017.12.6.2227)
Yang, M. et al., 2017. Simultaneously enhancing the strength, ductility and conductivity of copper matrix composites with graphene nanoribbons. Carbon 118 , pp.250-260. (10.1016/j.carbon.2017.03.055)
Yang, M. et al., 2017. Leaf-like carbon nanotube-graphene nanoribbon hybrid reinforcements for enhanced load transfer in copper matrix composites. Scripta Materialia 138 , pp.17-21. (10.1016/j.scriptamat.2017.05.024)
Yang, M. et al., 2017. Simultaneously improving the mechanical and electrical properties of poly(vinyl alcohol) composites by high-quality graphitic nanoribbons. Scientific Reports 7 17137. (10.1038/s41598-017-17365-3)
Yang, Z. et al., 2017. Improved thermoelectric generator performance using high temperature thermoelectric materials. Presented at: WCX™ 17: SAE World Congress Experience Detroit, USA 4-6 April 2017. SAE International. , pp.-. (10.4271/2017-01-0121)
Ye, L. et al., 2017. Short-term wind power prediction based on spatial model. Renewable Energy 101 , pp.1067-1074. (10.1016/j.renene.2016.09.069)
Yokoi, K. 2017. Numerical modeling of multiphase flows based on CLSVOF method, multi-moment methods and density-scaled balanced CSF model. Presented at: Institute of Non-Newtonian Fluid Mechanics Spring Meeting 2017 Lake Vyrnwy, Wales 10-12 April 2017.
Yokoi, K. 2017. Numerical simulations of free surface flows based on CLSVOF method, multi-moment methods and density-scaled balanced CSF model. Presented at: Special Interest Group on Drop Dynamics, UK Fluids Network Wadham College, University of Oxford, UK 3rd April 2017.
Yokoi, K. , Furuichi, M. and Sakai, M. 2017. An efficient multi-dimensional implementation of VSIAM3 and its applications to free surface flows. Physics of Fluids 29 (12) 121611. (10.1063/1.4996183)
Yuan, S. et al., 2017. Adaptive finite element method for eigensolutions of regular second and fourth order Sturm-Liouville problems via the element energy projection technique. Engineering Computations 34 (8), pp.2862-2876. (10.1108/EC-03-2017-0090)
Yuce, B. et al., 2017. Hybrid genetic bees algorithm applied to single machine scheduling with earliness and tardiness penalties. Computers and Industrial Engineering 113 , pp.842-858. (10.1016/j.cie.2017.07.018)
Yuce, B. , Mourshed, M. and Rezgui, Y. 2017. An ANN-based energy forecasting framework for the district level smart grids. In: Hu, J. et al., Smart Grid Inspired Future Technologies. Vol. 175, [Smart Grid Inspired Future Technologies]. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering Springer International Publishing. , pp.107-117. (10.1007/978-3-319-47729-9_12)
Yuce, B. , Mourshed, M. and Rezgui, Y. 2017. A smart forecasting approach to district energy management. Energies 10 (8) 1073. (10.3390/en10081073)
Yuce, B. and Rezgui, Y. 2017. An ANN-GA semantic rule-based system to reduce the gap between predicted and actual energy consumption in buildings. IEEE Transactions on Automation Science and Engineering 14 (3), pp.1351-1363. (10.1109/TASE.2015.2490141)
Yusuke, M. , Sinniah, I. and Kennedy, D. 2017. Attaching negative structures to model cut-outs in the vibration analysis of structures. Computers and Structures 184 , pp.14-24.
Yuyin, L. , Yahui, Z. and Kennedy, D. 2017. Random vibration analysis of axially compressed cylindrical shells under turbulent boundary layer in a symplectic system. Journal of Sound and Vibration 406 , pp.161-180. (10.1016/j.jsv.2017.06.018)
Zabek, D. et al. 2017. A novel pyroelectric generator utilising naturally driven temperature fluctuations from oscillating heat pipes for waste heat recovery and thermal energy harvesting. Journal of Applied Physics 120 (2)(10.1063/1.4958338)
Zabek, D. et al. 2017. Graphene ink laminate structures on poly(vinylidene difluoride) (PVDF) for pyroelectric thermal energy harvesting and waste heat recovery. ACS Applied Materials and Interfaces 9 (10), pp.9161-9167. (10.1021/acsami.6b16477)
Zagorscak, R. 2017. An investigation of coupled processes in coal in response to high pressure gas injection. PhD Thesis , Cardiff University.
Zagorscak, R. , Sedighi, M. and Thomas, H. R. 2017. Effects of thermo-osmosis on hydraulic behaviour of saturated clays. International Journal of Geomechanics 17 (3) 4016068. (10.1061/(ASCE)GM.1943-5622.0000742)
Zamani, A. R. et al., 2017. Edge-supported approximate analysis for long running computations. Presented at: IEEE 5th International Conference on Future Internet of Things and Cloud (FiCloud) Prague, Czech Republic 21-23 August 2017. Future Internet of Things and Cloud (FiCloud), 2017 IEEE 5th International Conference on. IEEE. , pp.321-328. (10.1109/FiCloud.2017.24)
Zangiabadi, E. et al., 2017. Computational prediction of pressure change in the vicinity of tidal stream turbines and the consequences for fish survival rate. Renewable Energy 101 , pp.1141-1156. (10.1016/j.renene.2016.09.063)
Zaraki, A. et al. 2017. Toward autonomous child-robot interaction: development of an interactive architecture for the humanoid Kaspar robot. Presented at: 3rd Workshop on Child-Robot Interaction at HRI 2017 Vienna, Austria 6 Mar 2017. Proceedings of 3rd Workshop on Child-Robot Interaction at HRI 2017. ACM
Zaraki, A. et al. 2017. Design and evaluation of a unique social perception system for human–robot interaction. IEEE Transactions on Cognitive and Developmental Systems 9 (4), pp.341-355. (10.1109/TCDS.2016.2598423)
Zhang, C. 2017. Peer-to-peer energy trading in electrical distribution networks. PhD Thesis , Cardiff University.
Zhang, A. et al., 2017. Energy hub based electricity generation system design for an offshore platform considering CO 2 -mitigation. Energy Procedia 142 , pp.3597-3602. (10.1016/j.egypro.2017.12.250)
Zhang, B. et al., 2017. An integrated numerical model for investigating guided waves in impact-damaged composite laminates. Composite Structures 176 , pp.945-960. (10.1016/j.compstruct.2017.06.034)
Zhang, C. et al. 2017. Review of existing peer-to-peer energy trading projects. Energy Procedia 105 , pp.2563-2568. (10.1016/j.egypro.2017.03.737)
Zhang, J. et al., 2017. An integrated ontology-based approach for optimizing structural design at early stage with consideration of environmental impact and cost. Presented at: 24th International Workshop on Intelligent Computing in Engineering Nottingham, UK 10-12 July 2017. Proceedings of the 24th EG-ICE International Workshop on Intelligent Computing in Engineering (EG-ICE 2017). Curran Associates, Inc. , pp.-.
Zhang, J. , Zhao, Y. and Li, H. 2017. Effect of basalt fibers on mechanical properties of high-performance concrete containing supplementary cementitious materials. SHCC 2017: Strain-Hardening Cement-Based Composites 15 , pp.181-187. (10.1007/978-94-024-1194-2_21)
Zhang, J. , Zhao, Y. and Li, H. 2017. Experimental investigation and prediction of compressive strength of ultra-high performance concrete containing supplementary cementitious materials. Advances in Materials Science and Engineering 2017 4563164. (10.1155/2017/4563164)
Zhang, L. et al., 2017. Coordinated voltage regulation of hybrid AC/DC medium voltage distribution networks. Journal of Modern Power Systems and Clean Energy 6 (3), pp.463-472. (10.1007/s40565-017-0324-x)
Zhang, L. et al., 2017. Releasing more capacity for EV integration by DC medium voltage distribution lines. Iet Power Electronics 10 (15), pp.2116-2123. (10.1049/iet-pel.2017.0172)
Zhao, J. et al., 2017. Local voltage control strategy of active distribution network with PV reactive power optimization. Presented at: 2017 IEEE Power & Energy Society General Meeting Chicago, IL, USA 16-20 July 2017. 2017 IEEE Power & Energy Society General Meeting. IEEE(10.1109/PESGM.2017.8274386)
Zhao, W. , Beach, T. H. and Rezgui, Y. 2017. Efficient least angle regression for identification of linear-in-the-parameters models. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 473 (2198) 20160775. (10.1098/rspa.2016.0775)
Zhao, Y. and Mourshed, M. 2017. Patients’ perspectives on the design of hospital outpatient areas. Buildings 7 (4) 117. (10.3390/buildings7040117)
Zheng, P. et al., 2017. Personalized product configuration framework in an adaptable open architecture product platform. Journal of Manufacturing Systems 43 , pp.422-435. (10.1016/j.jmsy.2017.03.010)
Zheng, R. 2017. SSR mitigation with TCSC in power systems. PhD Thesis , Cardiff University.
Zheng, R. et al. 2017. A control strategy for TCSC to mitigate SSR with local measurements. Presented at: 13th IET International Conference on AC and DC Power Transmission (ACDC 2017) Manchester, UK 14-16 Feb 2017. Proceedings of the 13th IET International Conference on AC and DC Power Transmission (ACDC 2017). IEEE(10.1049/cp.2017.0006)
Zheng, S. et al., 2017. Synthetic water repellent soils for slope stabilization. Presented at: Workshop on World Landslide Forum Ljubljana, Slovenia 29 May - 2 Jun 2017. Published in: Mikoš, M. et al., Advances in Landslide Technology. Vol. 3.Advancing Culture of Living with Landslides Cham: Springer. , pp.523-528. (10.1007/978-3-319-53487-9_61)
Zheng, S. et al., 2017. Hydrologic behavior of model slopes with synthetic water repellent soils. Journal of Hydrology 554 , pp.582-599. (10.1016/j.jhydrol.2017.09.013)
Zhong, Q. and Ming, W. 2017. Reducing the inductors of rectifiers having two outputs to improve power density. IEEE Transactions on Power Electronics 32 (10), pp.8150-8162. (10.1109/TPEL.2016.2636219)
Zhong, Q. et al., 2017. Beijing converters: bridge converters with a capacitor added to reduce leakage currents, DC-bus voltage ripples, and total capacitance required. IEEE Transactions on Industrial Electronics 64 (1), pp.325-335. (10.1109/TIE.2016.2609839)
Zhou, X. et al. 2017. Stochastic multi-scale finite element based reliability analysis for laminated composite structures. Applied Mathematical Modelling 45 , pp.457-473. (10.1016/j.apm.2016.12.005)
Zhou, H. et al., 2017. Power amplifier and antenna integration utilizing capacitively coupled feeding mechanism. Presented at: International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting San Diego, CA, USA 9-14 July 2017. 2017 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting. IEEE. , pp.2355-2356. (10.1109/APUSNCURSINRSM.2017.8073220)
Zhou, X. and Kim, H. A. 2017. A shape morphing technique for continuous variation of microstructures in multiscale structural topology optimization. Presented at: Simulation for Additive Manufacturing Munich; Germany 11-13 October 2017.
Zhou, Y. et al. 2017. Optimal scheduling of aggregated thermostatically controlled loads with renewable generation in the intraday electricity market. Applied Energy 188 , pp.456-465. (10.1016/j.apenergy.2016.12.008)
Zhou, Y. et al., 2017. Performance evaluation of peer-to-peer energy sharing models. Energy Procedia 143 , pp.817-822. (10.1016/j.egypro.2017.12.768)
Zhu, H. 2017. Size-dependent and tunable elastic and geometrical properties of nano-structured hierarchical cellular materials. Presented at: 2nd International Conference on Computational and Experimental Methods for composite materials and structures Wuhan, China 22-24 May 2017.
Zhu, H. and Ma, Y. 2017. The deformation mechanisms of fibre-network materials. Presented at: 3rd International Conference on Mechanics of Composites Bologna, Italy 4-7 July 2017.

2017 publications

School of Engineering

Contact us

Our location

Connect with us

Athena SWAN Award