Why study this course
The Engineering Foundation Year course is specially designed to give you the necessary knowledge you will need for an engineering degree.
Although the Foundation scheme lasts for one year, it must be considered as an entry route to one of our degree courses. It is not a stand-alone year, but the initial part of a programme of study leading towards a BEng or MEng degree. Once you successfully complete the Foundation Year you will progress to the first year of your chosen degree course, as long as you achieve an average of at least 50%.
The course is designed to expose you to the broad spectrum of engineering disciplines through lectures, tutorials and case studies. These include aspects of mathematics, physics and information technology that are relevant to engineering. The practical nature of the course contrasts with the way such subjects may have been presented at school. Assessment is by project work, continuous assessment and end-of-semester examinations.
When you have successfully passed the foundation year you can choose which engineering specialism you are most interested in and you will join the first year of that course.
There is a great deal of choice available to you at the Cardiff School of Engineering as it is one of only a few schools to offer full-time MEng and BEng degree courses in various branches of engineering, such as architectural, civil, electrical, mechanical, medical and integrated engineering. Many of these offer a sandwich year option working in industry or studying abroad.
Route to BEng or MEng courses
Successful completion of the foundation year will allow you to progress onto the first year of the core part of the BEng or MEng degree.
AAB-ABB ac eithrio Mathemateg. Bydd angen i chi basio elfen ymarferol wyddoniaeth y Safon Uwch os yw hyn yn rhan o'ch rhaglen astudio.
Extended/International Project Qualification: Applicants with grade A in the EPQ/IPQ will typically receive an offer one grade lower than the standard A level offer. Please note that any subject specific requirements must still be met.
The Welsh Baccalaureate Advanced Skills Challenge Certificate will be accepted in lieu of one A-Level (at the grades listed above), excluding any specified subjects.
DDD-DDM mewn Diploma Estynedig BTEC mewn unrhyw bwnc.
34-32 yn gyffredinol neu 666-665 mewn 3 phwnc HL. Rhaid peidio â chynnwys HL Maths.
Other UK qualifications may also be accepted, often in lieu of A-levels, but subject requirements must be met. If you are offering non-UK qualifications, our qualification equivalences guide should allow you to calculate what kind of offer you are likely to receive.
Please be aware that this is a general guide, and that some programmes may have more detailed or specific entry requirements which will be reflected in your offer.
Grade C or grade 4 in GCSE English Language.
At least 6.5 overall with a minimum of 5.5 in each subskill.
At least 90 overall with minimum scores of 17 for writing, 17 for listening, 18 for reading and 20 for speaking.
At least 62 overall with a minimum of 51 in all communicative skills.
Trinity ISE II/III
II: at least two Distinctions and two Merits.
III: at least a Pass in all components.
Other accepted qualifications
Please visit our English Language requirements page for more information on our other accepted language qualifications.
Mae'n rhaid eich bod chi wedi bod yn gweithio tuag at:
- Iaith Saesneg neu Gymraeg ar radd TGAU gradd C / 4 neu gyfwerth (fel Safon Uwch). Os oes angen fisa Haen 4 arnoch, rhaid i chi sicrhau bod eich cymhwyster iaith yn cydymffurfio â gofynion UKVI.
- TGAU Mathemateg gradd C / 4 neu gymhwyster cyfatebol (pwnc a gradd). Os ydych chi'n cymryd Mathemateg Safon Uwch (neu gyfwerth), nid oes angen Mathemateg TGAU. Gellir derbyn Mathemateg Craidd hefyd yn lle TGAU Mathemateg.
Nid ydym yn derbyn Meddwl yn Feirniadol, Astudiaethau Cyffredinol, Astudiaethau Dinasyddiaeth na phynciau cyfatebol tebyg eraill.
Byddwn yn derbyn cyfuniad o bynciau BTEC, Safon Uwch a chymwysterau eraill, yn amodol ar ofynion gradd a phwnc penodol y cwrs.
You are not required to complete a DBS (Disclosure Barring Service) check or provide a Certificate of Good Conduct to study this course. If you are currently subject to any licence condition or monitoring restriction that could affect your ability to successfully complete your studies, you will be required to disclose your criminal record. Conditions include, but are not limited to:
- access to computers or devices that can store images
- use of internet and communication tools/devices
- freedom of movement, including the ability to travel to outside of the UK or to undertake a placement/studies outside of Cardiff University
- contact with people related to Cardiff University.
Please see our admissions policies for more information about the application process.
Interview or selection process
The course is aimed at a wide range of potential applicants. For instance, if you have a GCSE pass in Mathematics and good A-level passes in subjects not recognised for direct entry to our degree schemes (such as no Maths A-level), the Foundation Year would be an ideal route for you to enter engineering.
Likewise, if you have a BTEC or a similar vocational qualification in a non-engineering subject, an overseas Baccalaureate or School Leaving Certificate that is not recognised for direct entry, then why not consider the Foundation Year?
Special consideration is given to students with alternative experience who show the drive, commitment and potential necessary to complete the course and continue further to gain a degree. In these cases, formal qualifications may be waived after consideration of vocational experience, although some evidence of mathematical and scientific ability would need to be provided.
Students from the UK
|Tuition fee (2021/22)||Deposit|
Students from the EU, EEA and Switzerland
If you are an EU/EEA/Swiss national, unless you qualify for UK fee status, tuition fees for 2021/22 will be in line with the fees charged for international students. UKCISA have provided information about Brexit and tuition fees.
Students from the rest of the world (international)
|Tuition fee (2021/22)||Deposit|
Financial support may be available to individuals who meet certain criteria. For more information visit our funding section. Please note that these sources of financial support are limited and therefore not everyone who meets the criteria are guaranteed to receive the support.
Course specific equipment
No specific equipment is needed. The University will provide resources such as computers and associated software, laboratory equipment (including any safety equipment) and any required learning resources.
We have a range of residences to suit your needs and budget. Find out more on our accommodation pages.
We’re based in one of the UK’s most affordable cities. Find out more about living costs in Cardiff.
This is at least a four-year full-time degree including a preliminary year. The course includes a carefully chosen balance of core modules and optional modules. Most modules are worth 10 credits, a few are worth 20 and the final-year project is worth 30. You need to earn 120 credits a year.
The modules shown are an example of the typical curriculum and will be reviewed prior to the 2021/22 academic year. The final modules will be published by September 2021.
The preliminary year consists of a series of lectures underpinned by practical laboratory sessions. Core modules include aspects of physics, engineering and information technology plus mathematics subjects such as calculus, trigonometry and algebra.
|Module title||Module code||Credits|
|Information Technology and Experimentation||EN0002||10 credits|
|Electrical Circuits and Analysis||EN0012||10 credits|
|Introduction to Mechanics||EN0016||20 credits|
|Introduction to Algebra||EN0017||20 credits|
|Introduction to Trigonometry||EN0018||10 credits|
|Introduction to Calculus||EN0019||20 credits|
|Engineering Principles||EN0020||20 credits|
|Engineering Applications||EN0021||10 credits|
Year one consists of a series of lectures underpinned by practical laboratory sessions. Core modules depend on which degree course you choose to follow.
Year two again consists of a series of lectures underpinned by practical laboratory sessions. Core modules depend on which degree course you choose to follow.
Year three includes a major project, with a value of a quarter of the overall year. For this you will work individually, alongside a supervising staff member.
Core modules depend on which degree course you choose to follow.
The University is committed to providing a wide range of module options where possible, but please be aware that whilst every effort is made to offer choice this may be limited in certain circumstances. This is due to the fact that some modules have limited numbers of places available, which are allocated on a first-come, first-served basis, while others have minimum student numbers required before they will run, to ensure that an appropriate quality of education can be delivered; some modules require students to have already taken particular subjects, and others are core or required on the programme you are taking. Modules may also be limited due to timetable clashes, and although the University works to minimise disruption to choice, we advise you to seek advice from the relevant School on the module choices available.
Learning and assessment
Teaching is through lectures, examples classes and extensive laboratory, IT and practical work. The taught modules in the first two years are largely compulsory, but options are usually available in year three. All students must complete a 30-credit individual project in year three, for which they are allocated a supervisor from among the teaching staff. There are opportunities for interactions with potential employers.
How will I be supported?
You will be assigned a personal tutor who is a member of the academic staff associated with your degree course. Your tutor will be there to advise you on academic, non-academic and personal matters in a confidential and informal manner when you need some guidance. We aim to help you overcome any problem, however big or small, as smoothly and quickly as possible.
For the 30-credit project in year three, you will be allocated a supervisor in the broad area of research specialism and meet regularly.
You will have access through the Learning Central website to relevant multimedia material, presentations, lecture handouts, bibliographies, further links, electronic exercises and discussion circles. Opportunities for you to reflect on your abilities and performance are available through the Learning Central ‘Personal Development Planning’ module.
The University offers a range of services including the Careers Service, the Counselling Service, the Disability and Dyslexia Service, the Student Support Service, and excellent libraries and resource centres.
We’ll provide you with frequent feedback on your work. This comes in a variety of formats including oral feedback in classes like design and project work and via return of marked coursework.
The opportunity to test your knowledge and understanding will be provided throughout the semester via class tests in Years 1 and 2, plus feedback on written assessments. Occasionally, peer assessment of an individual’s contribution to a group may be used, and you may also receive oral feedback on presentations and contributions to group activities.
What skills will I practise and develop?
All of the School’s BEng and MEng courses are accredited via the Engineering Council, meaning the core competencies of UK-SPEC (UK Standard for Professional Engineering Competence) are integrated throughout the taught years of the course.
You will develop some practical skills during the laboratory-based sessions, while there is a consistent core of management skills and personal development.
Written skills are reinforced through a series of reports and assignments, while communication skills are encouraged during module assessments.
Our integrated engineering graduates hold key positions in leading firms where engineering skills are required, such as Halcrow, Atkins, BP, BAE Systems, RWE npower, Mott McDonald, Network Rail, Rolls Royce, Ford, Tata Steel, Nokia, Bosch and beyond. Our graduates have also moved on to work within local government, UK and international utility companies and organisations such as Climate Energy and GlaxoSmithKline.
In 2015/16, 95% of the School’s graduates who were available for work reported they were in employment and/or further study within six months of graduation.
Data from Unistats is not yet available for this course.
Data from Unistats is not yet available for this course.