Dr Sivakumar Kulasegaram

2023

• Alshahrani, A., Kulasegaram, S. and Kundu, A. 2023. Elastic modulus of self-compacting fibre reinforced concrete: Experimental approach and multi-scale simulation. Case Studies in Construction Materials 18, article number: e01723. (10.1016/j.cscm.2022.e01723)
• Sharma, A., Kulasegaram, S., Brousseau, E., Esien, K. and Read, D. 2023. Investigation of nanoscale scratching on copper with conical tools using particle-based simulation. Nanomanufacturing and metrology 6(1), article number: 5. (10.1007/s41871-023-00179-5)

2022

• Shen, H., Brousseau, E. and Kulasegaram, S. 2022. Assessment and validation of SPH modeling for nano-indentation. Computational Particle Mechanics (10.1007/s40571-022-00514-5)
• Kulasegaram, S. and Mimoun, A. 2022. Assessing the effect of coarse aggregate size on self-compacting fibre reinforced concrete mix. International Journal of Civil Infrastructure (IJCI) 5, pp. 78-84. (10.11159/ijci.2022.011)
• Cui, T., Kulasegaram, S. and Li, H. 2022. Predicting fresh and hardened properties of self-compacting concrete containing fly ash by artificial neural network model. Presented at: Concrete Solutions 2022:8th International Conference on Concrete Repair, Durability, Service Life and Concrete Technology, Leeds, UK, 11-13 July 2022MATEC Web of Conferences: Concrete Solutions 2022 – 8th International Conference on Concrete Repair, Durability & Technology. EDP Sciences pp. 5005., (10.1051/matecconf/202236105005)
• Alshahrani, A., Cui, T. and Kulasegaram, S. 2022. Effect of sand to aggregate ratio on the properties of self-compacting high-performance concrete. International Journal of Civil Infrastructure (IJCI) 5, pp. 37-42. (10.11159/ijci.2022.006)
• Alshahrani, A., Cui, T. and Kulasegaram, S. 2022. Influence of sand to aggregate ratio on the fresh and mechanical properties of self-compacting high-performance concrete. Presented at: The 7th World Congress on Civil, Structural, and Environmental Engineering (CSEE'22), 10-12 April 2022Proceedings of the 7th World Congress on Civil, Structural, and Environmental Engineering (CSEE'22). ICSECT, (10.11159/icsect22.171)
• Mimoun, A. and Kulasegaram, S. 2022. Plastic-viscosity based mix design and the effect of limestone powder on material performance of self-compacting concrete. Proceedings of the ICE - Construction Materials (10.1680/jcoma.21.00038)
• Mimoun, A. and Kulasegaram, S. 2022. Developing self-compacting steel fibre reinforced concrete (SCSFRC) mixes based on target plastic viscosity and compressive strength. Presented at: 7th International Conference on Structural Engineering and Concrete Technology (ICSECT 2022), Lisbon, Portugal, 10-12 April 2022.

2021

• zheng, Z. J., Kulasegaram, S., Chen, P. and Chen, Y. Q. 2021. An efficient SPH methodology for modelling mechanical characteristics of particulate composites. Defence Technology 17(1), pp. 135-146. (10.1016/j.dt.2020.04.003)
• Mimoun, A. and Kulasegaram, S. 2021. A smoothed particle hydrodynamics study on modelling the flowability, passability and fill-ability of steel fibre suspended self-compacting concrete.. Presented at: PARTICLES 2021 VII International Conference on Particle-Based Methods Fundamentals and Applications, Hamburg, Germany, 4 - 6 October, 2021.
• Kulasegaram, S. and Mimoun, A. 2021. A smooth particle hydrodynamics study on modelling the flowability, passing-ability and fill-ability of steel fibre suspended self-compacting concrete. Presented at: PARTICLES 2021 VII International Conference on Particle-Based Methods. Fundamentals and Applications, Hamburg, Germany, 04 - 05 October 2021.

2020

• Mimoun, A., Kulasegaram, S. and Robert, D. 2020. Design of self–compacting concrete mixes with steel fibre based on target plastic viscosity and compressive strength. Presented at: 74th RILEM Annual Week and 40th Cement and Concrete Science Conference, Online, 31 August - 4 September 2020.
• Greto, G. and Kulasegaram, S. 2020. An efficient and stabilised SPH method for large strain metal plastic deformations. Computational Particle Mechanics 7, pp. 523-539. (10.1007/s40571-019-00277-6)
• Al-Saad, M., Suarez, C. A., Obeidat, A., Bordas, S. P. A. and Kulasegaram, S. 2020. Application of smooth particle hydrodynamics method for modelling blood flow with thrombus formation. Computer Modeling in Engineering & Sciences 122(3), pp. 831-862. (10.32604/cmes.2020.08527)

2019

• Greto, G. and Kulasegaram, S. 2019. Correction to: An efficient and stabilised SPH method for large strain metal plastic deformations. Computational Particle Mechanics (10.1007/s40571-019-00292-7)
• Kulasegaram, S. and Mimoun, A. 2019. An efficient computational procedure for modelling the flow of fibre suspended self-compacting concrete. Presented at: PARTICLES 2019 VI International Conference on Particle-Based Methods. Fundamentals and Applications,, Barcelona, Spain., 28-30 October 2019.

2018

• Kulasegaram, S. and Karihaloo, B. 2018. Assessing the flow characteristics of self-compacting concrete via numerical simulations of flow tests. Presented at: Conference on Computational Modelling of Concrete and Concrete Structures, Bad Hofgastein, Austria, 26 February - 1 March 2018 Presented at Meschke, G., Pichler, B. and Rots, J. G. eds.Computational Modelling of Concrete and Concrete Structures: Proceedings of the Conference on Computational Modelling of Concrete and Concrete Structures. London: CRC Press pp. 173., (10.1201/9781315182964-21)

2017

• Alyhya, W. S., Kulasegaram, S. and Karihaloo, B. L. 2017. Simulation of the flow of self-compacting concrete in the V-funnel by SPH. Cement and Concrete Research 100, pp. 47-59. (10.1016/j.cemconres.2017.05.021)
• Al-Rubaye, M. M., Kulasegaram, S. and Karihaloo, B. L. 2017. Simulation of self-compacting concrete in an L-box using smooth particle hydrodynamics. Magazine of Concrete Research 69(12), pp. 618-628. (10.1680/jmacr.16.00408)
• Lee, C. H., Gil, A. J., Hassan, O. I., Bonet, J. and Kulasegaram, S. 2017. A variationally consistent streamline upwind Petrov-Galerkin smooth particle hydrodynamics algorithm for large strain solid dynamic. Computer Methods in Applied Mechanics and Engineering 318, pp. 514-536. (10.1016/j.cma.2017.02.002)
• Peng, X., Kulasegaram, S., Wu, S. C. and Bordas, S. P. A. 2017. An extended finite element method (XFEM) for linear elastic fracture with smooth nodal stress. Computers & Structures 179, pp. 48-63. (10.1016/j.compstruc.2016.10.014)
• Kulasegaram, S. and Karihaloo, B. 2017. Recent developments in modelling self-compacting concrete flow using smooth particle hydrodynamics method. Presented at: PARTICLES 2017 V International Conference on Particle-Based Methods. Fundamentals and Applications,, Hannover, Germany., 26-28 September 2017. pp. -.

2016

• Abo Dhaheer, M. S., Kulasegaram, S. and Karihaloo, B. L. 2016. Simulation of self-compacting concrete flow in the J-ring test using smoothed particle hydrodynamics (SPH). Cement and Concrete Research 89, pp. 27-34. (10.1016/j.cemconres.2016.07.016)
• Lee, C. H., Gil, A. J., Greto, G., Kulasegaram, S. and Bonet, J. 2016. A new Jameson-Schmidt-Turkel Smooth Particle Hydrodynamics algorithm for large strain explicit fast dynamics. Computer Methods in Applied Mechanics and Engineering 311, pp. 71-111. (10.1016/j.cma.2016.07.033)
• Greto, G., Kulasegaram, S., Lee, C. H., Gil, A. J. and Bonet, J. 2016. A stabilised total lagrangian corrected smooth particle hydrodynamics technique in large strain explicit fast solid dynamics. Presented at: 7th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS Congress 2016, Crete, Greece, 5-10 June 2016 Presented at Papadrakakis, M. et al. eds.ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering, Vol. 4. Athens, Greece: National Technical University of Athens pp. 8231-8240., (10.7712/100016.2408.10124)
• Badry, F., Kulasegaram, S. and Karihaloo, B. 2016. Effect of cone lift rate on the flow time of self-compacting concrete. Magazine of Concrete Research 68(2), pp. 80-86. (10.1680/macr.14.00379)
• Badry, F., Kulasegaram, S. and Karihaloo, B. 2016. Estimation of the yield stress and distribution of large aggregates from slump flow test of self-compacting concrete mixes using smooth particle hydrodynamics simulation. Journal of Sustainable Cement-Based Materials 5(3), pp. 117-134. (10.1080/21650373.2014.979266)

2015

• Abo Dhaheer, M. S., Al-Rubaye, M. M., Alyhya, W. S., Karihaloo, B. L. and Kulasegaram, S. 2015. Proportioning of self-compacting concrete mixes based on target plastic viscosity and compressive strength: Part I - mix design procedure. Journal of Sustainable Cement-Based Materials 5(4), pp. 199-216. (10.1080/21650373.2015.1039625)
• Abo Dhaheer, M. S., Al-Rubaye, M. M., Alyhya, W. S., Karihaloo, B. . L. and Kulasegaram, S. 2015. Proportioning of self-compacting concrete mixes based on target plastic viscosity and compressive strength: Part II experimental validation. Journal of Sustainable Cement-Based Materials 5(4), pp. 217-232. (10.1080/21650373.2015.1036952)
• Karihaloo, B., Kulasegaram, S. and Badry, F. 2015. Accurate estimation of rheological properties of self-compacting concrete. Guisuanyan Xuebao 43(10), pp. 1396-1400. (10.14062/j.issn.0454-5648.2015.10.09)
• Badry, F., Kulasegaram, S. and Karihaloo, B. 2015. Simulation of the flow of non-Newtonian self-compacting concrete. Presented at: 23rd Conference of the Association of Computational Mechanics in Engineering (ACME-UK 2015), Swansea, 8-10 April 2015 Presented at Gil, A. J. and Sevilla, R. eds.Proceedings of the 23rd Conference of the Association for Computational Mechanics in Engineering, ACME-UK. 2015. Swansea: Swansea University pp. 193-196.
• Karihaloo, B. and Kulasegaram, S. 2015. Determination of fibre orientation factor in high and ultra-high- performance fibre-reinforced self-compacting concrete. Presented at: HPFRCC-7: 7th RILEM Workshop on High Performance Fiber Reinforced Cement Composites, Stuttgart , Germany, 1-3 June 2015 Presented at Reinhardt, H. W., Parra-Montesinos, G. J. and Garrecht, H. eds.HPFRCC-7: Proceedings of the 7th RILEM Workshop on High Performance Fiber Reinforced Cement Composites. Stuttgart, Germany: Fraunhofer IRB Verlag pp. 137-144.
• Badry, F., Karihaloo, B. and Kulasegaram, S. 2015. Simulation of the flow of non-Newtonian self-compacting concrete. Presented at: PARTICLES 2015 IV International Conference on Particle-Based Methods. Fundamentals and Applications, Barcelona, Spain, 28-30 September 2015 Presented at Oñate, E. et al. eds.Proceedings of the I V International Conference on Particle - Based Methods – Fundamentals and Applications held in Barcelona, Spain 28 - 3 0 September 2015. Barcelona, Spain: International Center for Numerical Methods in Engineering (CIMNE)
• Karihaloo, B., Kulasegaram, S. and Badry, F. 2015. Accurate estimation of the rheological properties of self-compacting concrete. Presented at: 14th International Congress on the Chemistry of Cement (ICCC 2015), Beijing, China, 13-16 October 2015.
• Karihaloo, B., Deeb, R. and Kulasegaram, S. 2015. 3D modelling of the flow of self-compacting concrete with or without steel fibres. Presented at: ICCMS 2014: The 5th International Congress On Computational Mechanics And Simulation, Chennai, India, 10 – 13 December 2014 Presented at Nagesh, R. et al. eds.Proceedings Of The 5th International Congress On Computational Mechanics And Simulation.

2014

• Deeb, R., Kulasegaram, S. and Karihaloo, B. L. 2014. 3D modelling of the flow of self-compacting concrete with or without steel fibres. Part I: slump flow test. Computational Particle Mechanics 1(4), pp. 373-389. (10.1007/s40571-014-0002-y)
• Deeb, R., Kulasegaram, S. and Karihaloo, B. L. 2014. 3D modelling of the flow of self-compacting concrete with or without steel fibres. Part II: L-box test and the assessment of fibre reorientation during the flow. Computational Particle Mechanics 1(4), pp. 391-408. (10.1007/s40571-014-0003-x)
• Thai, C. H., Kulasegaram, S., Tran, L. V. and Nguyen-Xuan, H. 2014. Generalized shear deformation theory for functionally graded isotropic and sandwich plates based on isogeometric approach. Computers and Structures 141, pp. 94-112. (10.1016/j.compstruc.2014.04.003)
• Kulasegaram, S., Deeb, R. and Karihaloo, B. 2014. Reorientation of fibres during the flow of fibre-reinforced self-compacting concrete and determination of fibre orientation factor. Presented at: EURO-C 2014 Conference, St. Anton am Arlberg; Austria, 24th - 27th March 2014.
• Deeb, R., Karihaloo, B. L. and Kulasegaram, S. 2014. Reorientation of short steel fibres during the flow of self-compacting concrete mix and determination of the fibre orientation factor. Cement and Concrete Research 56, pp. 112-120. (10.1016/j.cemconres.2013.10.002)
• Nguyen-Xuan, H., Tran, L. V., Thai, C. H., Kulasegaram, S. and Bordas, S. P. A. 2014. Isogeometric analysis of functionally graded plates using a refined plate theory. Composites: Part B Engineering 64, pp. 222-234. (10.1016/j.compositesb.2014.04.001)
• Kulasegaram, S., Karihaloo, B. L. and Deeb, R. 2014. Reorientation of fibres during the flow of fibre- reinforced self-compacting concrete and determination of fibre orientation factor. Presented at: European Conference on Computational Modelling of Concrete Structures (EUROC 2014), St. Anton am Arlberg, Austria, 24-27 March 2014 Presented at Bicanic, N. et al. eds.Computational Modelling of Concrete Structures: proceedings of EURO-C 2014, Vol. 2. Boca Raton: CRC Press pp. 593-602.
• Deeb, R., Kulasegaram, S. and Karihaloo, B. 2014. 3D modelling of the flow of self-compacting concrete with or without steel fibres. Presented at: Symposium on Design, Performance and Use of on Self-Consolidating Concrete, Xiamen, China, 5-8 June 2014 Presented at Shi, C., Ou, Z. and Khayat, K. H. eds.Proc 3rd Symposium on Design, Performance and Use of on Self-Consolidating Concrete (SCC2014). RILEM Publ S.A.R.L. France pp. 31-31.

2013

• Kulasegaram, S. and Karihaloo, B. L. 2013. Fibre-reinforced, self-compacting concrete flow modelled by smooth particle hydrodynamics. Proceedings of the ICE Engineering and Computational Mechanics 166(1), pp. 22-31. (10.1680/eacm.11.00004)
• Shabana, Y., Karihaloo, B. L., Zhu, H. and Kulasegaram, S. 2013. Influence of processing defects on the measured properties of Cu-A12O3 composites : a forensic investigation. Composites Part A: Applied Science and Manufacturing 46, pp. 140-146. (10.1016/j.compositesa.2012.11.004)
• Deeb, R., Karihaloo, B. L. and Kulasegaram, S. 2013. Simulation of fiber orientation during the flow of ultra high performance self-compacting concrete. Presented at: EMI 2013: Engineering Mechanics Institute Conference, Evanston, IL, USA, 4-7 August 2013.
• Karihaloo, B. L. and Kulasegaram, S. 2013. Structural integrity considerations of a rocket thruster. Presented at: 8th International Conference on Structural Integrity and Fracture (SIF2013), Melbourne, Australia, 11-12 July 2013.
• Karihaloo, B. L., Kulasegaram, S. and Deeb, R. 2013. Simulation of fiber orientation during the flow of ultra high performance self-compacting concrete. Presented at: Particles 2013: III International Conference on Particle-Based Methods, Fundamentals and Applications, Stuttgart, Germany, 18-20 September 2013.

2012

• Deeb, R., Kulasegaram, S. and Karihaloo, B. L. 2012. Modelling the flow of self-compacting high and ultra-high performance fibre-reinforced concretes. Presented at: 8th RILEM International Symposium on Fibre Reinforced Concrete: Challenges and Opportunities (BEFIB 2012), Guimarães, Portugal, 19-21 September 2012.
• Kulasegaram, S., Shabana, Y. and Karihaloo, B. L. 2012. Thermo-mechanical modelling of a functionally graded material. Presented at: 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Vienna, Austria, 10-14 September 2012.

2011

• Shabana, Y., Kulasegaram, S., Zhu, H. and Karihaloo, B. L. 2011. Thermo-mechanical modeling of functionally graded materials. Presented at: 21st National and 10th ISHMT-ASME Heat and Mass Transfer conference, Chennai, India, 27-30 December 2011.
• Kulasegaram, S., Karihaloo, B. L. and Deeb, R. 2011. Application of SPH method for modelling the flow of ultra high performance fibre reinforced self-compacting concrete. Presented at: PARTICLES 2011: II International Conference on Particle-based Methods Fundamentals and Applications, Barcelona, Spain, 26-28 October 2011.
• Kulasegaram, S., Karihaloo, B. L. and Ghanbari, A. 2011. Modelling the flow of self-compacting concrete. International Journal for Numerical and Analytical Methods in Geomechanics 35(6), pp. 713-723. (10.1002/nag.924)

2010

• Liu, Y., Chen, Y. and Kulasegaram, S. 2010. Projection method with self-adaptive time steps for LES of ignition and extinction in non-premixed jet flames. International Journal for Numerical Methods in Biomedical Engineering 26(9), pp. 1203-1218. (10.1002/cnm.1210)
• Kulasegaram, S. and Chen, Y. 2010. Modelling particulate composite using SPH Method. Presented at: 4th European Conference on Computational Mechanics (ECCM 2010), Paris, France, 16-21 May 2010.
• Ghanbari, A., Karihaloo, B. L. and Kulasegaram, S. 2010. Prediction of the plastic viscosity of self-compacting steel fibre reinforced concrete. Presented at: Proceedings CONMOD2010, Lausanne, Switzerland. pp. 61-64.
• Karihaloo, B. L., Kulasegaram, S. and Ghanbari, A. 2010. Modelling the flow of self-compacting concrete. Presented at: Proceedings of the 4th European Congress on Computational Mechanics (ECCM2010)CDROM, Paris, France. Vol. 59.

2009

• Chen, Y. Q. and Kulasegaram, S. 2009. Numerical modelling of fracture of particulate composites using SPH method. Computational Materials Science 47(1), pp. 60-70. (10.1016/j.commatsci.2009.06.014)
• Chen, P., Gong, Y., Chen, Y. and Kulasegaram, S. 2009. An enhanced formulation of error bound in subspace iteration method. Communications in Numerical Methods in Engineering 27(1), pp. 113-127. (10.1002/cnm.1297)
• Islam, M. S., Kulasegaram, S. and Chen, Y. Q. 2009. Computational modelling of particulate composites using Element Free Galerkin method. Presented at: ACME-UK Annual Conference 2009, Nottingham, UK.

2008

• Kulasegaram, S. and Chen, Y. Q. 2008. Application of SPH method for modelling particulate composites. Presented at: 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Venice, Italy, 30 June-4 July 2008 Presented at Schrefler, B. A. and Perego, U. eds.8th World Congress on Computational Mechanics, WCCM8, 5th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2008 : Venice, Italy, 30 June-4 July 2008. Barcelona: CIMNE

2007

• Chen, Y. Q. and Kulasegaram, S. 2007. Numerical modelling of fracture in particulate composite using SPH method. Presented at: International Symposium on Computational Mechanics, Beijing, China.

2006

• Askes, A., Bennett, T. and Kulasegaram, S. 2006. Meshless discretisation of non-local damage theories. Presented at: Proceedings of IUTAM symposium on Discretization Methods for Evolving Discontinuities, Lyon, France Presented at Combescure A, B. R. ed., Vol. 5.
• Bennet, T. and Kulasegaram, S. 2006. On the use of damage model based on non-local displacements in the element-free Galerkin method flows. Presented at: European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS), Lisbon, Portugal.
• Bennett, T. and Kulasegaram, S. 2006. A damage model based on non-local displacements in the element-free Galerkin method. Presented at: Advisory Committee on Mathematics Education annual conference (ACME- UK), Belfast, UK.

2004

• Kulasegaram, S., Bonet, M., Profit, M. and Rodriguez-Paz, M. X. 2004. Variational formulation for the smooth particle hydrodynamics (SPH) simulation of fluid and solid problems. Computer Methods in Applied Mechanics and Engineering 193(12-14), pp. 1245-1256. (10.1016/j.cma.2003.12.018)
• Kulasegaram, S., Bonet, J., Lewis, R. W. and Profit, M. 2004. A variational formulation based contact algorithm for rigid boundaries in two-dimensional SPH applications. Computational Mechanics 33(4), pp. 316-325. (10.1007/s00466-003-0534-0)
• Kulasegaram, S. and Bonet, J. 2004. Variational formulation of fractional step methods in SPH fluid mechanics applications. Presented at: 4th European Congress on Computational Methods in Applied Sciences and Engineering ECCOMAS 2004, Jyväskylä, Finland, 24-28 Jul 2004.
• Lewis, R., Ransing, R. S., Pao, W. K. S., Kulasegaram, S. and Bonet, J. 2004. Alternative techniques for casting process simulation. International Journal of Numerical Methods for Heat and Fluid Flow 14(2), pp. 145-166.

2003

• Kulasegaram, S., Bonet, J., Lewis, R. W. and Profit, M. 2003. High pressure die casting simulation using a Lagrangian particle method. Communications in Numerical Methods in Engineering 19(9), pp. 679-687. (10.1002/cnm.633)

2002

• Profit, M., Kulasegaram, S., Bonet, J. and Lewis, R. 2002. Modelling of high pressure die casting using the CSPH method. Presented at: 3rd International Conference on Engineering Computational Technology, Prague, Czech Republic, 4-6 Sept 2002.
• Bonet, J., Rodriguez-Paz, M. X. and Kulasegaram, S. 2002. The simulation of shallow waters and debris flows using corrected smooth particle hydrodynamics. Presented at: WCCM V - Fifth World Congress on Computational Mechanics, Vienna, Austria, 7-12 July 2002.
• Bonet, J. and Kulasegaram, S. 2002. A simplified approach to enhance the performance of smooth particle hydrodynamics methods. Applied Mathematics and Computation 126(2-3), pp. 133-155. (10.1016/S0096-3003(00)00143-0)
• Bonet, J. and Kulasegaram, S. 2002. Alternative total Lagrangian formulations for corrected smooth particle hydrodynamics (CSPH) methods in large strain dynamics problems. European Review of Finite Elements 11, pp. 893-912.
• Lewis, R., Ransing, R. S., Kulasegaram, S. and Bonet, J. 2002. Recent developments in casting simulations based on optimisation methods, meshless methods and medial axis transformation. Presented at: 5th World Congress in Computational Mechanics Conference, Vienna, Austria.

2001

• Bonet, J. and Kulasegaram, S. 2001. Remarks on tension instability of Eulerian and Lagrangian corrected smooth particle hydrodynamics (CSPH) methods. International Journal of Numerical Methods in Engineering 52(11), pp. 1203-1220. (10.1002/nme.242)
• Bonet, J. and Kulasegaram, S. 2001. Smooth particle hydrodynamics (SPH) techniques for the simulation of free surface flows. Presented at: European Congress on Computational Methods in Applied Sciences and Engineering. ECCOMAS--CFD 2001, Swansea, 4 - 7 Sept 2001.