Cyhoeddiadau
2021
2020
- Giles, A.et al. 2020. A waste heat recovery strategy and its deployment: an integrated steelworks case study. Proceedings of the ICE - Waste and Resource Management (10.1680/jwarm.20.00011)
- Agwu, O.et al. 2020. Visualisation and performance evaluation of biodiesel/methane co-combustion in a swirl-stabilised gas turbine combustor. Fuel 277, article number: 118172. (10.1016/j.fuel.2020.118172)
- Pugh, D.et al. 2020. An investigation of ammonia primary flame combustor concepts for emissions reduction with OH*, NH2* and NH* chemiluminescence at elevated conditions. Proceedings of the Combustion Institute (10.1016/j.proci.2020.06.310)
- Runyon, J.et al. 2020. Characterization of Additive Layer Manufacturing Swirl Burner Surface Roughness and Its Effects on Flame Stability Using High-Speed Diagnostics.. Journal of Engineering for Gas Turbines and Power 142(4), article number: 41017. (10.1115/1.4044950)
- Pugh, D.et al. 2020. Emissions performance of staged premixed and diffusion combustor concepts for an NH3/air flame with and without reactant humidification. Presented at: ASME Turbo Expo 2020: Turbomachinery Technical Conference & Exposition, Virtual, 21-25 September 2020. , (10.1115/GT2020-14953)
- Runyon, J.et al. 2020. Experimental and kinetic evaluation of pressurized lean premixed hydrogen-air flame stability with carbon dioxide and steam dilution. Presented at: ASME Turbo Expo 2020: Turbomachinery Technical Conference & Exposition, Virtual, 21-25 September 2020Proceedings of ASME Turbo Expo 2020Turbomachinery Technical Conference and Exposition. ASME, (10.1115/GT2020-16083)
2019
- Pugh, D.et al. 2019. Influence of steam addition and elevated ambient conditions on NOx reduction in a staged premixed swirling NH3/H2 flame. Proceedings of the Combustion Institute 37(4), pp. 5401-5409. (10.1016/j.proci.2018.07.091)
- Runyon, J.et al. 2019. Characterization of ALM swirl burner surface roughness and its effect on flame stability using high-speed diagnostics. Presented at: ASME Turbo Expo 2019, Phoenix, Arizona, USA, 17-21 June 2019ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition: Volume 4A: Combustion, Fuels, and Emissions. pp. GT2019-90215-V04AT04A008., (10.1115/GT2019-90215)
- Valera Medina, A.et al. 2019. Premixed ammonia/hydrogen swirl combustion under rich fuel conditions for gas turbines operation. International Journal of Hydrogen Energy 44(16), pp. 8615-8626. (10.1016/j.ijhydene.2019.02.041)
2018
2017
- Buffi, M.et al. 2017. Emissions characterization tests for hydrotreated renewable jet fuel from used cooking oil and its blends. Applied Energy 201, pp. 84-93. (10.1016/j.apenergy.2017.05.104)
- Pugh, D. G.et al. 2017. Dissociative influence of H2O vapour/spray on lean blowoff and NOx reduction for heavily carbonaceous syngas swirling flames. Combustion and Flame 177, pp. 37-48. (10.1016/j.combustflame.2016.11.010)
- Giles, A. P.et al. 2017. On flammability hazards from pressurised high-flashpoint liquid releases. Journal of Loss Prevention in the Process Industries 46, pp. 185-194. (10.1016/j.jlp.2017.01.024)
- Pugh, D.et al. 2017. Catalytic influence of water vapor on lean blowoff and NOx reduction for pressurised swirling syngas flames. Presented at: ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, North Carolina, USA, 26-30 June 2017Volume 4B: Combustion, Fuels and Emissions. ASME pp. V04BT04A033., (10.1115/GT2017-64609)
- Runyon, J.et al. 2017. Experimental analysis of confinement and swirl effects on premixed ch4-h-2 flame behavior in a pressurized generic swirl burner. Presented at: ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, North Carolina, USA, 26-30 June 2017ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Vol. 4B. ASME, (10.1115/GT2017-64794)
2016
- Giles, A. P.et al. 2016. Applicability of the Peclet number approach to blow-off and flashback limits of common steelworks process gases. Fuel 182, pp. 531-540. (10.1016/j.fuel.2016.05.082)
- Kurji, H.et al. 2016. Combustion characteristics of biodiesel saturated with pyrolysis oil for power generation in gas turbines. Renewable Energy 99, pp. 443-451. (10.1016/j.renene.2016.07.036)
- Gant, S.et al. 2016. Area classification of flammable mists: Summary of joint-industry project findings. Presented at: Hazards 26, Edinburgh, United Kingdom, 24-26 May 201626th Institution of Chemical Engineers Symposium on Hazards 2016 (HAZARDS 26). Institution of Chemical Engineers Symposium Series Vol. 161. Rugby, UK: Institution of Chemical Engineers pp. 346-357.
- Marsh, R.et al. 2016. Premixed methane oxycombustion in nitrogen and carbon dioxide atmospheres: measurement of operating limits, flame location and emissions. Proceedings of the Combustion Institute. Proceedings of the Combustion Institute 36(3), pp. 3949-3958. (10.1016/j.proci.2016.06.057)
- Buffi, M.et al. 2016. Evaluation of combustion behavior of renewable jet fuel in a combustor rig: influence of HEFA and its blends on flame stability and emissions compared to aviation kerosene. Presented at: 24th European Biomass Conference, Amsterdam, The Netherlands, 6-9 June 2016.
2015
2014
2013
- Williams, C.et al. 2013. Utilising waste heat for steam generation within an integrated
steelworks: A methodology for power generation and CO2 reduction. Presented at: 2013 ACEEE Summer Study on Energy Efficiency in Industry, Niagara Falls, NY, USA, 23-26 July 2013.
- Pugh, D.et al. 2013. Thermal distributive blast furnace gas characterisation, a steelworks case study. Applied Thermal Engineering 53(2), pp. 358-365. (10.1016/j.applthermaleng.2012.05.014)
- Syred, N.et al. 2013. Tangential Velocity Effects and Correlations for Blowoff and Flashback in a Generic Swirl Burner and the Effect of a Hydrogen Containing Fuel. Presented at: 51st AIAA Aerospace Science Meeting, Texas, USA, 7-10 January 2013. , (10.2514/6.2013-736)
- Valera Medina, A.et al. 2013. Influence of the central recirculation zone strength in the blow off mechanism using different fuels. Presented at: European Combustion Meeting (ECM2013), Lund, Sweden, 25-28 June 2013.
- Syred, N.et al. 2013. Effect of inlet and outlet configurations on blow-off and flashback with premixed combustion for high hydrogen content fuels in a generic swirl burner. Presented at: ICAE 2013, Pretoria, South Africa, 12-15 November 2013.
2012
2006
Conferences
- Hewlett, S. G.et al. 2021. Industrial wastewater as an enabler of green ammonia to power via gas turbine technology. Presented at: Turbomachinery Technical Conference & Exposition (TURBO EXPO 2020), Virtual, 21-25 September 2020Proceedings of ASME Turbo Expo 2020 Turbomachinery Technical Conference and Exposition. ASME pp. GT2020-14581., (10.1115/GT2020-14581)
- Pugh, D.et al. 2020. Emissions performance of staged premixed and diffusion combustor concepts for an NH3/air flame with and without reactant humidification. Presented at: ASME Turbo Expo 2020: Turbomachinery Technical Conference & Exposition, Virtual, 21-25 September 2020. , (10.1115/GT2020-14953)
- Runyon, J.et al. 2020. Experimental and kinetic evaluation of pressurized lean premixed hydrogen-air flame stability with carbon dioxide and steam dilution. Presented at: ASME Turbo Expo 2020: Turbomachinery Technical Conference & Exposition, Virtual, 21-25 September 2020Proceedings of ASME Turbo Expo 2020Turbomachinery Technical Conference and Exposition. ASME, (10.1115/GT2020-16083)
- Runyon, J.et al. 2019. Characterization of ALM swirl burner surface roughness and its effect on flame stability using high-speed diagnostics. Presented at: ASME Turbo Expo 2019, Phoenix, Arizona, USA, 17-21 June 2019ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition: Volume 4A: Combustion, Fuels, and Emissions. pp. GT2019-90215-V04AT04A008., (10.1115/GT2019-90215)
- Pugh, D.et al. 2017. Catalytic influence of water vapor on lean blowoff and NOx reduction for pressurised swirling syngas flames. Presented at: ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, North Carolina, USA, 26-30 June 2017Volume 4B: Combustion, Fuels and Emissions. ASME pp. V04BT04A033., (10.1115/GT2017-64609)
- Runyon, J.et al. 2017. Experimental analysis of confinement and swirl effects on premixed ch4-h-2 flame behavior in a pressurized generic swirl burner. Presented at: ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, North Carolina, USA, 26-30 June 2017ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Vol. 4B. ASME, (10.1115/GT2017-64794)
- Gant, S.et al. 2016. Area classification of flammable mists: Summary of joint-industry project findings. Presented at: Hazards 26, Edinburgh, United Kingdom, 24-26 May 201626th Institution of Chemical Engineers Symposium on Hazards 2016 (HAZARDS 26). Institution of Chemical Engineers Symposium Series Vol. 161. Rugby, UK: Institution of Chemical Engineers pp. 346-357.
- Buffi, M.et al. 2016. Evaluation of combustion behavior of renewable jet fuel in a combustor rig: influence of HEFA and its blends on flame stability and emissions compared to aviation kerosene. Presented at: 24th European Biomass Conference, Amsterdam, The Netherlands, 6-9 June 2016.
- Runyon, J.et al. 2015. Methane-oxygen flame stability in a generic premixed gas turbine swirl combustor at varying thermal power and pressure. Presented at: ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, Montreal, Quebec, Canada, 15–19 June 2015Conference Proceedings of ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, Vol. 4B. Combustion, Fuels and Emissions New York: ASME, (10.1115/GT2015-43588)
- Giles, A.et al. 2014. Explosive area classification for involatile liquid fuels: a replacement to flashpoint categorisation. Presented at: 26th European Conference Liquid Atomization & Spray Systems, Bremen, Germany, 8-10 September 2014.
- Williams, C.et al. 2013. Utilising waste heat for steam generation within an integrated
steelworks: A methodology for power generation and CO2 reduction. Presented at: 2013 ACEEE Summer Study on Energy Efficiency in Industry, Niagara Falls, NY, USA, 23-26 July 2013.
- Syred, N.et al. 2013. Tangential Velocity Effects and Correlations for Blowoff and Flashback in a Generic Swirl Burner and the Effect of a Hydrogen Containing Fuel. Presented at: 51st AIAA Aerospace Science Meeting, Texas, USA, 7-10 January 2013. , (10.2514/6.2013-736)
- Valera Medina, A.et al. 2013. Influence of the central recirculation zone strength in the blow off mechanism using different fuels. Presented at: European Combustion Meeting (ECM2013), Lund, Sweden, 25-28 June 2013.
- Syred, N.et al. 2013. Effect of inlet and outlet configurations on blow-off and flashback with premixed combustion for high hydrogen content fuels in a generic swirl burner. Presented at: ICAE 2013, Pretoria, South Africa, 12-15 November 2013.
- Pugh, D.et al. 2012. Laminar burning velocity and Markstein length characterisation of compositionally dynamic blast furnace gas. Presented at: Turbo Expo 2012: Turbine Technical Conference and Exposition, Copenhagen, Denmark, 11-15 June 2012ASME Turbo Expo 2012: Turbine Technical Conference and Exposition Volume 2: Combustion, Fuels and Emissions, Parts A and B. ASME pp. 1257-1266., (10.1115/GT2012-69667)
Articles
- Giles, A.et al. 2020. A waste heat recovery strategy and its deployment: an integrated steelworks case study. Proceedings of the ICE - Waste and Resource Management (10.1680/jwarm.20.00011)
- Agwu, O.et al. 2020. Visualisation and performance evaluation of biodiesel/methane co-combustion in a swirl-stabilised gas turbine combustor. Fuel 277, article number: 118172. (10.1016/j.fuel.2020.118172)
- Pugh, D.et al. 2020. An investigation of ammonia primary flame combustor concepts for emissions reduction with OH*, NH2* and NH* chemiluminescence at elevated conditions. Proceedings of the Combustion Institute (10.1016/j.proci.2020.06.310)
- Runyon, J.et al. 2020. Characterization of Additive Layer Manufacturing Swirl Burner Surface Roughness and Its Effects on Flame Stability Using High-Speed Diagnostics.. Journal of Engineering for Gas Turbines and Power 142(4), article number: 41017. (10.1115/1.4044950)
- Pugh, D.et al. 2019. Influence of steam addition and elevated ambient conditions on NOx reduction in a staged premixed swirling NH3/H2 flame. Proceedings of the Combustion Institute 37(4), pp. 5401-5409. (10.1016/j.proci.2018.07.091)
- Valera Medina, A.et al. 2019. Premixed ammonia/hydrogen swirl combustion under rich fuel conditions for gas turbines operation. International Journal of Hydrogen Energy 44(16), pp. 8615-8626. (10.1016/j.ijhydene.2019.02.041)
- Valera-Medina, A.et al. 2018. Investigation of combustion of emulated biogas in a gas turbine test rig. Journal of Thermal Science 27(4), pp. 331-340. (10.1007/s11630-018-1024-1)
- Runyon, J.et al. 2018. Lean methane flame stability in a premixed generic swirl burner: Isothermal flow and atmospheric combustion characterization. Experimental Thermal and Fluid Science 92, pp. 125-140. (10.1016/j.expthermflusci.2017.11.019)
- Pugh, D.et al. 2018. Catalytic influence of water vapor on lean blowoff and NOx reduction for pressurised swirling syngas flames. Journal of Engineering for Gas Turbines and Power 140(6), article number: 61502. (10.1115/1.4038417)
- Buffi, M.et al. 2017. Emissions characterization tests for hydrotreated renewable jet fuel from used cooking oil and its blends. Applied Energy 201, pp. 84-93. (10.1016/j.apenergy.2017.05.104)
- Pugh, D. G.et al. 2017. Dissociative influence of H2O vapour/spray on lean blowoff and NOx reduction for heavily carbonaceous syngas swirling flames. Combustion and Flame 177, pp. 37-48. (10.1016/j.combustflame.2016.11.010)
- Giles, A. P.et al. 2017. On flammability hazards from pressurised high-flashpoint liquid releases. Journal of Loss Prevention in the Process Industries 46, pp. 185-194. (10.1016/j.jlp.2017.01.024)
- Giles, A. P.et al. 2016. Applicability of the Peclet number approach to blow-off and flashback limits of common steelworks process gases. Fuel 182, pp. 531-540. (10.1016/j.fuel.2016.05.082)
- Kurji, H.et al. 2016. Combustion characteristics of biodiesel saturated with pyrolysis oil for power generation in gas turbines. Renewable Energy 99, pp. 443-451. (10.1016/j.renene.2016.07.036)
- Marsh, R.et al. 2016. Premixed methane oxycombustion in nitrogen and carbon dioxide atmospheres: measurement of operating limits, flame location and emissions. Proceedings of the Combustion Institute. Proceedings of the Combustion Institute 36(3), pp. 3949-3958. (10.1016/j.proci.2016.06.057)
- Syred, N.et al. 2014. Effect of inlet and outlet configurations on blow-off and flashback with premixed combustion for methane and a high hydrogen content fuel in a generic swirl burner. Applied Energy 116, pp. 288-296. (10.1016/j.apenergy.2013.11.071)
- Pugh, D.et al. 2013. Thermal distributive blast furnace gas characterisation, a steelworks case study. Applied Thermal Engineering 53(2), pp. 358-365. (10.1016/j.applthermaleng.2012.05.014)
Thesis
Contracts
Supervised Students